• Korean Journal of Heritage: History & Science
• /
• v.36
• /
• pp.267-297
• /
• 2003

The plain coarse pottery from the Unjeonri Bronze Age relic sites in the Cheonan, Korea were studied on the basis of clay mineralogy, geochemistry and archaegeological interpretations. For the research, the potteries are utilized at the analysis for 6 pieces of plain coarse potteries. Color of the these potteries are mainly light brown, partly shows the yellowish brown to reddish brown. The interior, surface and inside of the pottery appear as different colors in any cases. Original source materials making the Unjeonri potteries are used of mainly sandy clay soil with extreme coarse grained irregularly quartz and feldspar. The magnetic susceptibility of the Unjeonri pottery range from 0.20 to 1.20. And the Unjeonri soil's magnetic susceptibility agree almost with 0.20 to 1.30. In the same magnetization of soil and pottery, the results revealed that the Unjeonri soil and low material of pottery are same produced by identical source materials. The Unjeonri potteries and soil are very similar patterns with all characteristics of soil mineralogy, geochemical evolution trend. The result seems to be same relationships between the behavior and enrichment patterns on the basis of a compatible and a incompatible elements. Consequently, the Unjeonri potteries suggest that made the soil to be distributed in the circumstance of the relic sites as the raw material are high in a greater part. In the Unjeonri soil, the kaolinite is common occurred minerals. However, in the Unjeonri pottery, the kaolinite was not detected in all broken pieces. The kaolinite was presumed to destroy crystal structure during the firing processes of over $550^{\circ}C$. The quartz is phase transition from ${\alpha}$-quartz to ${\beta}$-quartz at $573^{\circ}C$, but the Unjeonri pottery did not investigated any phase transition evidences of quartz. The chorite was detected within the mostly potteries and soils. As the results, the Unjeonri potteries can be interpreted by not experiencing a firing temperature over $800^{\circ}C$. The colloidal and cementing materials between the quartz and low materials during the heating did not exist in the internal part of the potteries. An any secondary compounds by heating does not appear within the crack to happen during the dry of the pottery. The hyphae group are kept as it is with the root tissue of an organic matters to live in the swampy land. In the syntheses of all results, the general firing condition to bake and make the Unjeonri pottery is presumed from $550^{\circ}C$ to $800^{\circ}C$. However, the firing condition making the Unjeonri pottery can be different firing temperature partially in one pottery. Even, the some part of the pottery does not take a direct influence on the fire.

• Applied Chemistry for Engineering
• /
• v.30 no.3
• /
• pp.384-388
• /
• 2019

In winter season, the snow and ice accretion on the bottom of the high speed railway rolling stock and boogie part has fallen at a high speed from the ballast section (gravel section for the transmission of the rolling stock load received by sleepers and fixing sleepers), causing the gravel to be scattered, thereby damaging the railway rolling stock structures and facilities. In order to solve these problems, the gravel scattering prevention net, manual de-icing, and movable hot air machine were used, but their efficiency was low. For the more efficient de-icing than ever before, an optimum material for de-icing fluid for high speed railway rolling stock was developed by evaluating the ice melting capacity, kinematic viscosity, evaporation of the material used as a chemical de-icing fluid. Four kinds of organic acid salts (sodium formate, sodium acetate, potassium formate and potassium acetate) and two different alcohols (propylene glycol, glycerol) were used as evaluation materials. Potassium formate, potassium acetate, and propylene glycol had similar ice melting capacities in the indoor test, but the propylene glycol showed the best ice melting capacity in spraying the system simulation test. This is because the kinematic viscosity of propylene glycol was 2.989029 St, which is higher than those of other materials therefore, it could stay longer on the ice and de-icing. In addition, potassium formate and potassium acetate were difficult to be used since the crystals precipitated and adversely affected the appearance of the rolling stock. The propylene glycol is the most optimum as an de-icing fluid for the high speed railway rolling stock.

• Journal of Conservation Science
• /
• v.35 no.2
• /
• pp.169-176
• /
• 2019

The material composition of 19 ornaments used for women's hats in the late $19^{th}$ century to $20^{th}$ century, which are kept at National Folk Museum of Korea, was analyzed using SEM-EDS. Sixteen ornaments were composed of $Na_2O$ and PbO, which form adifferent lead glass from those that have been excavated or handed down since ancient times in Korea. The chemical composition analysis has confirmed that two ornaments belong to the mixed alkali glass, while one belongs to the potash glass IIItype. This lead glass is similar in composition to the Japanese craft lead glass that was imported to Joseon during the Japanese colonial era. It is estimated that the lead glass ornaments used in women's hats in the late $19^{th}$ century to $20^{th}$ century were made from raw materials imported from Japan or made from lead glass used for crafts in Japan. This shows that jewelry such as jade and amber, which have been traditionally used in the modern and present ages, have been replaced by craft lead glass imported from Japan.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.2
• /
• pp.326-335
• /
• 2021

This study was undertaken to determine the effect of fermented soybean extract and its fractions on skin cell proliferation and growth. The extract was procured by the pepsin and Lactobacillus rhamnosus fermentation of soybean. LC-MS analysis was performed subsequent to soybean fermentation, and cell viability was measured by the WST-1 assay. Cell proliferation was observed to increase after exposing cells to the fermented soybean extract and its fractions at all concentrations tested (0~2,000 ㎍/mL). In particular, compared to the normal control group and 120 % proliferation of the EGF (epidermal growth factor) positive control group, 160~180 % cell proliferation was achieved at 800 ㎍/ml, indicating the excellent potential as an application material for skin aging inhibition and skin cell regeneration. In addition, we also examined the effects of fermented soybean extract and its fractions on wound healing ability, in HaCaT cells and fibroblasts. Our results indicate excellent cell migration abilities after treatment with fermented soybean extract and its fractions, as compared to the control treatment. Similar cell migration abilities were observed in the positive control group (EGF). Taken together, our results indicate that fermented soybean extract and its fractions (F4 and F5) exert amelioratory effects as a natural material for skin.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.24 no.5
• /
• pp.119-125
• /
• 2020

Research on high-attenuation concrete for the vibration reduction performance by mixing epoxy-based synthetic resins and aggregates is actively being conducted. The curing time of high-attenuation concrete is very short because water is not used, and the physical and dynamic properties are very excellent. therefore, it is expected to be widely used in building structures requiring reduction of interior-floor noise and vibration. Furthermore, A way to expand the applicability of the high-damping concrete mixed with polymer in the field of reinforcement material have been variously studied. In order to replace polymer concrete with ordirnary concrete and existing anti-vibration reinforcement material, it is necessary to review overall vibration reduction performance considering physical properties, dynamic properties, productivity and field applicability. In this study, the physical and dynamic properties of polymer concrete by epoxy mixing ratio compared with ordirnary concrete. As a result, the elastic modulus was similar. On the other hand, polymer concrete for the compressive, tensile, and flexural strengths was quite more excellent. In particular, the measured tensile strength of polymer concrete was 4-10 times higher than that of ordirnary concrete. it was a big difference, and the frequency response function and damping ratio was studied through modal test and finite element analysis model. The dynamic stiffness of polymer concrete was 20% greater than that of ordirnary concrete, and the damping ratio of polymer concrete was approximately 3 times more than that of ordirnary concrete.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.47 no.1
• /
• pp.1-7
• /
• 2021

With increasing interest in the effectiveness and safety of sunscreen worldwide, research on the development of new inorganic sunscreen is also gaining momentum. In the present study, non-nano sized needle type zinc oxide, which can meet the regulation of nano-material as a recent problem, has been synthesized and surface-modified with cetyl alcohol to obtain needle type zinc oxide powder. Here, we also investigated their physical properties and evaluated their potential application as sunscreens. As a result of the experiment, the sunscreen with needle type zinc oxide powder, which was non-nano, showed similar UV-protection properties and transparency compare to that of 40nm size zinc oxide. It was further confirmed that the UV blocking effect was significantly increased when the needle type zinc oxide dispersion was applied to the sunscreen. Therefore, although the needle type zinc oxide is non-nano (200 nm) material, it has the potential to be applied to the product as an excellent transparency (improvement of whiteness), UV protection efficacy and smooth texture.

• Journal of Biomedical Engineering Research
• /
• v.43 no.5
• /
• pp.308-318
• /
• 2022

The purpose of this study is to evaluate the biomechanical properties of fractured adjacent soft tissue during closed reduction after forearm fracture using the finite element method. To accomplish this, a finite element (FE) model of the forearm including soft tissue was constructed, and the material properties reported in previous studies were implemented. Based on this, nine finite element models with different fracture types and fracture positions, which are the main parameters, were subjected to finite element analysis under the same load and boundary conditions. The load condition simulated the traction of increasing the fracture site spacing from 0.4 mm to 1.6 mm at intervals of 0.4 mm at the distal end of the radioulnar bone. Through the finite element analysis, the fracture type, fracture location, and displacement were compared and analyzed for the fracture site spacing of the fractured portion and the maximum equivalent stress of the soft tissues adjacent to the fracture(interosseous membrane, muscle, fat, and skin). The results of this study are as follows. The effect of the major parameters on the fracture site spacing of the fractured part is negligible. Also, from the displacement of 1.2 mm, the maximum equivalent stress of the interosseous membrane and muscle adjacent to the fractured bone exceeds the ultimate tensile strength of the material. In addition, it was confirmed that the maximum equivalent stresses of soft tissues(fat, skin) were different in size but similar in trend. As a result, this study was able to numerically confirm the damage to the adjacent soft tissue due to the fracture site spacing during closed reduction of forearm fracture.

• Journal of the Korean Applied Science and Technology
• /
• v.39 no.4
• /
• pp.580-587
• /
• 2022

In this study, the physiological activity effect of trichosanthis cucumeroidis radix extract on antioxidant activity, whitening, and anti-inflammatory activity was checked, and the possibility of its use as a functional material was checked. The purpose of this study was to confirm the antioxidant activity through DPPH radical scavenging activity of trichosanthis cucumeroidis radix extract, whitening activity effect through melanin production inhibition ability for melanin cell B16F10 melanoma cell, and anti-inflammatory activity effect through NO production inhibition ability for macrophage RAW 264.7 cell. As a result of the study, the concentration-dependent DPPH radical scavenging activity of the trichosanthis cucumeroidis radix extract was confirmed, and DPPH radical scavenging activity similar to that of the positive control Ascorbic acid was confirmed. It was confirmed that the melanin production inhibitory activity induced by 100 nM 𝛼-MSH and the NO production inhibitory ability induced by LPS 1 ㎍/mL were significantly suppressed. Accordingly, it is considered that the trichosanthis cucumeroidis radix extract may be used as a functional material having antioxidant, whitening, and anti-inflammatory effects.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.26 no.4
• /
• pp.73-80
• /
• 2022

This study evaluated changes in fluidity and rheological properties over time for 3D printed composite materials, and evaluated compressive strength and splitting tensile strength properties for laminated and molded specimens. The composite material for 3D printing starts to change rapidly after 30 minutes of extrusion, and the viscosity of the material tends to be maintained up to 90 minutes, but it was confirmed that construction within 60 minutes after mixing is effective. The compressive strength of the laminated test specimen showed equivalent or better performance at all ages compared to the molded test specimen. In the stress-strain curve of the laminated specimen, the initial slope was similar to that of the molded specimen, but the descending slope was on average 1.9 times higher than that of the molded specimen, indicating relatively brittle behavior. The splitting tensile strength of the P-V laminated specimen was about 6% lower than that of the molded specimen. It is judged that this is because the interfacial adhesion force against the vertical load is affected by the pattern direction of the laminated test specimen.

• Journal of Appropriate Technology
• /
• v.6 no.2
• /
• pp.219-225
• /
• 2020

Importance of touch equipment and smart learning increases and public institutions and educational facilities are applying smart devices to their daily environments. However, users of public smart devices are at risk of being exposed to the direct and indirect spread of infectious diseases. This study develops an exo-finger that wraps the fingertips of smart device users and is intended to have a disease prevention effect when used on public equipment. An exoskeletal body was fabricated by inserting a secondary material which is a mixture of the activating material, carbon black (CB) and a macromolecular polymer (elastomer) into a mold. This device was confirmed to have a touch function when the CB content was 0.030 wt% or higher, and the content of the elastomer was varied so that it could have a friction force similar to that when a person touches a smart device (a friction coefficient of 2.5). Through experiments, it was concluded that the CB content had little effect on the friction coefficient. As a result of testing the completed prototype on a smart device, it was proven that the developed exoskeletal device can be useful in situations where it is impossible to touch due to wearing protective gears, or when equipment such as gloves is used to prevent the spread of infectious diseases.