• Korean Journal of Food Science and Technology
• /
• v.38 no.4
• /
• pp.475-482
• /
• 2006

The quality characteristics and functional properties of fermented soybean by lactic acid bacteria (FSB) were investigated and compared with those of soybean (control) and commercial cheonggukjang Powder (CGP). The crude protein, lipid, and fiber contents of FSB were similar to those in CGP. The vitamin $B_2$ content in FSB (1.4 mg%) was similar to the control (1.3 mg%) whereas it was remarkably low in the CGP (0.2 mg%). The bright yellow color of FSB determined by Hunter's colormeter was quite different from the dark reddish brown color of the CGP. The pH of FSB was the lowest and thee amino-nitrogen was 517.2 mg%, which was higher than that in CGP (468.1 mg%). Glutamic acid, aspartic acid and leucine were the most abundant amino acids. In particular, the increase in the glutamic acid level was noticeable in FSB. The fatty acid compositions of FSB and CGP were similar to the control. However, the sucrose and fructose levels were lower after fermentation but the glucose level was higher. The results of isoflavone analysis by HPLC showed that the levels of daidzein and genistein in FSB were as much as 48.33 and 52.82 mg%, respectively, which is higher than that found in CGP. The DPPH free radical scavenging effects of FSB and CGP were 1.8 times higher an those of the control. The fibrinolytic activity determined by the diameter of the lysed area on the fibrin plate was the most effective in FSB. In conclusion, it is believed that FSB has a similar or higher quality than CGP. Therefore, FSB is expected to be good functional food material.

• Journal of Science of Art and Design
• /
• v.7
• /
• pp.5-63
• /
• 2005

Generally, the meanings of destruction are related in the meaning of demolition, breakdown, into fragments ... and so on, and the similar meanings are twist, crush, demolish, split, cut, into pieces , break up ... etc. Further, it has related in the cruelty and destructive heart which are linked with orgy, Sadism, Necrophilia and so on. The meanings are also expressed by the initial , which are deprivation, deface, defame, deform, degrade, delegitimize, denounce , deride, destroy, devalue, as well as debase, debunk, declaim, declassify, decry, delete, denigrate, deprecate, despise or detract ...and so on. Dario Gamboni has discussed the meaning in his book as two categories Iconoclasm and Vandalism. And the similar meanings could be found in the words which has the initial of , like abase, abate, abhor, abjure, abolish, abridge, abuse ...and so on. Even though the distinct meanings of Iconoclasm and Vandalism, it is not easy to distinguish clearly between the differences when the results are accomplished in contemporary paintings because of the similarity of the results. In korean vocabulary there are no similar words to distinguish between the meanings of destruction and deconstruction, and the deconstruction is not recorded in the general dictionaries. However the meaning of is diminishing, separation, contrast and so on. So the unification of the word as do-construction is not construct, minus construction, reverse construction. And Vincent Ditch explained that there are the meaning of destroy the text. From Jacques Derrida, the deconstruction strategy is to criticise the world of traditional metaphysics and logocentrism, and not to reconstruire the philosophical meaning of texts but $d\'{e}construire$ them. And Saussure emphasized that the signifers could have more meaning that there can be more signified in traditional texts in the art. as a result, deconstruction is explained that there are many signified meanings in a signifer. In this thesis , from using the meanings of destruction and deconstruction, to distinguish the expressive skills in contemporary art works are arising. Therefore, special methods which are linked in the destruction styles are selected. As a result, the two different purposes of destruction is arising, one is enmity destruction and the other is self destruction another word, auto destruction or destruction to create The enmity destruction can be distinguished by the two category Iconoclasm and Vandalism. They come from the moment of different historical aspect is arising and want to attack the Icon or masterpiece this concept is from the study of John Philips and especially iconoclasm is linked with religious and artistic heart, but Vandalism is come from the political attack. Sometime, this distinguish is not clearly arising, because the two aspects are co-related in the attack. As a result, firstly, the Iconoclastic controversy had arisen in the methods of Dadaism which has developed by Man Ray, Francis Picabia and Marcel Duchamp. They want to attack the pre-established master-pieces and painting spaces, and they had 'non-artistic attitude' not to be art. Since 1980, the German artist Anselm Kiefer adapted the methods and made them his special skills so he had tried to paint tough brush strokes and draw with hugh pallette image line and fire and water images , they can be the image attack as the Iconoclasm. secondly, the model of vandalism is to be done by hammer, drill, canon and so on. the method is to attack the content of painting. Further, the object of destruction is bound by cords and iron lings to demolish or to declare the authority of pre-statues; it symbolize the pre-authority is gone already. Self-destruction based paintings are clearly different in the purpose of approaching the art work. First of all, they can be auto-destruction, creative destruction and metamorphosis destruction, which is linked with the skill the material aspect and basic stature, and sign destruction or signifier destruction, which is link with the inner meaning destruction that is considered as the Semiotical destruction in post-modern paintings. Since 1960, the auto destruction is based on the method of firing, melting, grinding and similar skills, which is linked with Neo-Dada and reverse-assemblage. Metamorphosis destruction is strongly linked with the basic inner heart price and quality, so it can be resulted in the changedness of expectation and recognition. Tony Cragg has developed the skills to metamorphose the wood as stone or iron as cloth and stone as sponge and rubber and so on. The researcher has developed the same style in the series of since 2003. The other self-destructive methods are found in the skill of sign destruction. In the methods the meaning of the art is not fixed as one or two, but is developed multi-meaning and differ from original starting situation, so Jacques Derrida called the difference meaning in deconstruction. It is the destruction of textes. These methods are accomplished by David Salle, Francesco Clemente, and recently Tracy Emin, who has developed the attacking heart in the spectators' emotion. Sometime in the method of self-destruction, it is based on horror and shock, the method is explored by Demian Hirst and Jakes and Dinos Chapman. Their destructive styles stimulate ambivalent heart and destroy original sign of girl and animals.

• Horticultural Science & Technology
• /
• v.30 no.1
• /
• pp.34-41
• /
• 2012

The study was conducted in a glasshouse to examine the possibility of producing paprika plug seedlings in a newly developed inert phenolic foam growing medium. Plug seedlings of 'Fascinato' paprika were grown in five media, Grodan rockwool (Grodan Co. Ltd., Denmark), UR rockwool (UR Co. Ltd., Korea), phenolic foam LC (Smithers Oasis Korea Co. Ltd., Korea), phenolic foam RC, and phenolic foam 3813-4 all in a pellet type. Seeds were germinated in a growth chamber ($25^{\circ}C$, 90% RH, dark) for 4-5 days and then seedlings were grown in a glasshouse with nutrient solution supplied by an overhead irrigation system. Seedling growths were measured 20 days after sowing. The medium pH was the highest in the Grodan rockwool, and medium EC was the highest in phenolic foam 3813-4, although no nutritional excess disorders were observed. Germination rates of paprika were higher than 90% in all the media. Plant height, stem diameter, T/R ratio, leaf area, and chlorophyll showed a similar to those in the rockwool medium. Number of leaves, length of the longest root and dry weights of shoot were not significantly different among treatments. Overall, phenolic foam LC and RC produced seedlings with a similar growth as the rockwool medium. The results obtained suggest that rockwool can be replaced with a new material such as phenolic foam in the commercial scale production of plug seedlings of 'Fascinato' paprika.

• Journal of the Korean Home Economics Association
• /
• v.28 no.1
• /
• pp.21-41
• /
• 1990

All the cultures are enriched and developed themselves through the contact with another culture, which propagate and transplant its new cultural elements to a time-honoured tradition. Therefore, the investigation of the origin of each culture means to find out the all the elements of each culture itself in the end. In Korean Costume, we can find both the Costume of frizid jone and that of temperate jone togther, effected by the influence of typical continental climate. Accordingly, we can also realize that both Lee, of southern tribe and Haw, of northern tribe suitable for the protection of cold weather, existed in Korea. Even Lee and Hwa were used together, Hwa had been appeared earlier than Lee along with the Skitai Costume and we can find its origin in the line of Skitai costume. In Central Asia, Tadjhik was the only race tracing their ancestry from ancient Iranic genuinely and they had been keeping the culture of Skitai origin continuously. The purpose of this thesis is to examine Korean's own culture of the footwear through the investigation of Tadjhik's culture of costume, specially through the culture of Tadjhik footware. To reach the conclusion of this thesis, the comparision and investigation between Korea and Tadjhik was made carefully for the followings, culture of life and costume, forms and materials of footwear. 1. The treasers and boots made by leather and felt was the origin of costume culture of Central Asia and aboves were appeared in persian costumn for the first time. We can consider that those had connection with Korean culture of costume. 2. Form of Tadjhik footwear can be devided by hwa and Lee, and there was a big difference in form between that of mountain area and plain area. We can find more rariety in footwear of mountain area. 3. If we compare the form of Hwa and Lee of Tadjhik with our own footwear, we can find out many things in common and there are lots of similarities particularly in form and material. 4. We can say that the difference of Tadjhik and Korean was the preference of Hwa for Tadjhik and Lee for Korean, aboves came from the different totography, climate condition and life style. 5. The form of male and female footwear of tadjhik was almost similar, but female footwear had various and beautiful decorations for the ornament. 6. The materials of Tadjhik footwear was mostly leather, and Hwa was used particularly for labour purposes. 7. We can expect that Tadjhik of Central Asia and Korea had a similar orgin and style on the footwear. It can be expected that we can find out many common things in further investigation of the study of Tadjhik costume and will exert the examination continuously.

• Journal of Korean Society of Environmental Engineers
• /
• v.31 no.9
• /
• pp.765-774
• /
• 2009

Fiber Dyeing and Finishing facility has been recognized as an important pollution source due to its consumption of large volumes of water and chemicals. Unit mass discharge for the conventional water quality parameters such as flowrate, SS, $BOD_5,\;COD_{Mn},\;COD_{Cr}$, TN, TP were estimated. To represent the respective industries, three companies were carefully selected based on its manufacturing goods, flowrate and location at various unit operations and processes. More than 90% of decrease in unit mass estimation between influent and effluent of BOD was observed. But the values themselves were similar to those of Fiber Manufacturing facility due to the high loadings of organic matter. Biodegradability of influent was almost three times higher than that of effluent. Unit mass discharge estimations of unit process (estimated in this study) based on space, products and raw material were similar to those of composite process (estimated by National Institute of Environmental Research), while big difference was observed in the other factors. Unit mass discharge factors calculated in this study can be used as the reference for the estimation of water pollution loading costs in Nakdong river basin. For the effective water pollution control and management, it is essential to characterize the various types of water quality parameters from the effluents of individual industrial wastewater treatment plants.

• The Journal of Korean Academy of Prosthodontics
• /
• v.41 no.4
• /
• pp.421-439
• /
• 2003

Statement of problem : It is difficult to obtain a good titanium casting body using the traditional sprue design because of high melting point of Ti, and the low fluidity and high reactivity of molten Ti. Purpose : A new sprue design for titanium casting bodies needs more trial and error. In order to decrease the number of trial and error, computer simulation(MAGMASOFT, Magmasoft Giessereitechnologie GmbH, Achen, Germany) was used to optimize sprue design in U-shaped implant superstructures. Material and method : Five kinds of sprue were examined for the design of the sprue former for titanium casting: Sprue design A(sprue length 4 mm, rectangular shape, 4 sprues), Sprue design B(sprue length 4 mm. round shape. radius 2 mm, 7 sprues), Sprue design C (sprue length 2 mm, round shape, radius 2 mm, 7 sprues). Sprue design D (sprue length 2 mm, cone shape, large radius 3mm. small radius 2mm, 7 sprues), and Sprue design E( sprue length 2 mm. one unit channel shape). Sprue design F(sprue length 2mm, one unit channel shape) was also examined for the design of the customized sprue former in the Biotan system(Schutz Dental Gmbh, Germany). The casting bodies were taken in Sprue design A, Sprue design D, Sprue design E, and Sprue design F in the Biotan casting system. The numerically predicted defects were compared with the experimental dental castings by the radiographic and sectional view observations. Results : 1. According to the result of computer simulation, turbulence during mold filling was decreased in the sequence of Sprue design F, Sprue design E, Sprue design D, Sprue design C, Sprue design B, and Sprue design A. 2. The calculated solidification time contours indicate that hot spot was moved from the casting body to the sprue button in the sequence of Sprue design A, Sprue design B, Sprue design C, Sprue design D, and Sprue design E. The filling pattern of Sprue design F was similar to that of Sprue design E. 3 The predicted filling pattern shows that less turbulence was found in the customized sprue former than in the standard sprue former. 4. According to the results of the radiographic and cross sectional observations, casting defects less than 1mm were found at the center of a casting body with Sprue design E and Sprue design F. However, larger casting defects of 4mm were found in a casting with Sprue design A. 5. The predicted casting porosity was similar to that of the real casting. Conclusion : One unit channel-type and customized sprue former can be recommended. Further research and developement of various sprue designs using computer simulation in necessary to optimize casting design, in order to reduce the formation of casting defects in implant titanuim super-structures.

• Journal of the Korean earth science society
• /
• v.28 no.3
• /
• pp.324-342
• /
• 2007

This study reports petrography and geochemical characteristics of the basalt lava flows in Seongsan-Ilchulbong area, the easternpart of Jeju island, Korea, to understand the evolutionary processes of magma. Basalt lavas are classified into the Pyoseon-ri basalt and the Seongsan-ri basalt. The Pyoseon-ri basalt is dark-gray colored with many vescicles, and mainly consists of olivine, feldspar and rarely of clinopyroxene as phenocrysts. The Seongsan-ri basalt is largely aphanitic basalt and bright-gray colored, divided into two lava-flow units: lower lava flow (B1) and upper lava flow (B2) by the intercalated yellowish lapillistone and paleosol. The lavas plotted into sub-alkaline tholeiitic basalt and alkaline basalt series. The tholeiitic basalts have characteristically higher $SiO_2,\;FeO^T$, and CaO contents, but lower $TiO_2,\;K_2O,\;P_2O_5$ and other incompatible elements compared to the alkali basalts. The tholeiitic basalts have higher $SiO_2$ to the same MgO contents than the alkalic basalts. The contents of Ni, Cr, and MgO show a strong positive correlation, which indicates that low-MgO phases like plagioclase and titanomagnetite were important during the differentiation of magma. The contents of incompatible elements against that of Th show a strong positive correlation. The chondrite-nomalized REE patterns of tholeiitic and alkalic basalts are subparallel each other. LREEs contents of the former are lower than, but HREEs contents are similar to the latter. They both are similar to their K/Ba ratios. The primitive-mantle normalized spider diagram demonstrates that the contents of Ba and Th of all basaltic magma are enriched, and yet Cr, Ni are depleted. The tholeiitic and alkalic basalts may be originated from a different degree of the partial melting of the same mantle material source, and one shows a higher degree of the partial melting than the other.

• Journal of Periodontal and Implant Science
• /
• v.38 no.4
• /
• pp.657-668
• /
• 2008

Purpose: In this study, we compared low-power $CO_2$ laser treatment to ultrasonic scaling, which is generally approved as a power-driven mechanical instrumentation, and evaluated both of these treatments regarding their clinical effectiveness and change in the volume of in GCF. Material and methods: 20 patients who had gingivitis were selected. all of patients has no systemic problems. Randomly selected, one quadrant received ultrasonic scaling only, another quadrant received ultrasonic scaling and $CO_2$ laser irradiation, the other quadrant received $CO_2$ laser irradiation only. Clinical parameters measured at baseline, 1 weeks, 2weeks, 4weeks and 8weeks. Result: Pocket probing depth and clinical attachment level were not changed during study period. Gingival index of all group were improved after treatment. At 1 weeks after treatment, Gingival index of ultrasonic scaling group was only significantly different compared to control group. At 2 weeks after treatment, gingival index of all experimental group were significantly different compared to control group. At 4 and 8 weeks after treatment, gingival index of all group were increased, but experimental group were lower than control group. Sulcus bleeding index was similar to the results of gingival index. At 1 weeks after treatment, all experimental group were significantly different compared to control group and it maintained during study. At 2 weeks after treatment, sulcus bleeding index of all group were lowest during study. Gingival crevicular fluid were measured with $Periotron^{(R)}$ 8000($Oraflow^{(R)}$, Inc. USA). At baseline, all group were showed moderately severe condition. At 1 week after treatment, laser treatment only group was reduced quantity of gingival crevicular fluid mostly, and all group were reduced quantity of gingival crevicular fluid. At 2 weeks after treatment, all group were health state. At 4 and 8 weeks after treatment, all group were showed recurrent of inflammation, and control group was the most significantly increased. Conclusion: This study showed that the effects of $CO_2$ laser treatment were similar to conventional ultrasonic scaling and this result remained longer than plaque control only. These results suggest possibility of $CO_2$ laser treatment for altered periodontal therapy.

• Economic and Environmental Geology
• /
• v.38 no.2 s.171
• /
• pp.129-134
• /
• 2005

The $^{87}Sr/^{86}Sr$ ratios between water and biogenic material are similar in marine and lacustrine environment. Pb isotope ratios we, however, reported not to have been corresponding between the biological tissues and ambient water in aquatic system, contrary to the Sr isotope ratios. In order to explore the potential application of two isotopes as environmental tracers, we report here the isotopic compositions of strontium and lead of gastropod shell in fresh water in Jinan area. The $^{87}Sr/^{86}Sr$ ratios of carbonate shells of gastropod living in fresh stream water, are similar as that of ambient water but are different by sites. The different $^{87}Sr/^{86}Sr$ ratios of stream water between the sites is likely caused by the difference of the isotopic composition of Sr derived form rocks in the basin. In contrast, there is a distinct difference of the lead isotopic values between the water and the gastropod shell, suggesting that shell-fish available lead in aquatic system is different from dissolved lead in water. It is assumed that the majority of Pb in stream water is derived from atmospheric Pb accumulated on soil materials over years rather than from rock.

• Fire Science and Engineering
• /
• v.32 no.2
• /
• pp.24-29
• /
• 2018

To improve the fire safety of spring bed mattress, a cooling frame including cooling material (water) was made and a cooling frame was installed under the bed mattress or between the bed mattress and bed mattress base; fire tests (real scale) were conducted with or without a cooling frame. Similar fire behavior was observed at the beginning of the test (approximately 3 minutes). Subsequently, rapid fire growth in the mattress without a cooling frame, but with a cooling frame, the decline progressed without growth. The flame spread on the top surface of the bed mattress was similar in the semicircular direction, and the average flame speed velocity was analyzed at approximately 0.005 m/s. The maximum flame height was found to be approximately 2.7 m without a cooling frame, and approximately 1.8 m with a cooling frame installed. In addition, the maximum heat release rate was measured to be approximately 740 kW without a cooling frame, and approximately 400 kW with a cooling frame installed. As a result, the flame height and heat release rate were reduced when the bed mattress was fired through the installed cooling frame.