• Korean Journal of Materials Research
• /
• v.32 no.1
• /
• pp.36-43
• /
• 2022

Breakthrough analysis has widely been explored for the dynamic separation of gaseous mixtures in porous materials. In general, breakthrough experiments measure the components of a flowing gas when a gaseous mixture is injected into a column filled with an adsorbent material. In this paper, we report on the design and fabrication of a breakthrough curve measurement device to study the dynamic adsorptive separation of hydrogen isotopologues in porous materials. Using the designed system, an experiment was conducted involving a 1:1 mixture of hydrogen and deuterium passed through a column filled with zeolite 13X (1 g). At room temperature, both hydrogen and deuterium were adsorbed in negligible amounts; however, at a temperature of 77 K, deuterium was preferentially adsorbed over hydrogen. The selectivity was different from that in the existing literature due to the different sample shapes, measurement methods, and column structures, but was at a similar level to that of cryogenic distillation (1.5).

• Earthquakes and Structures
• /
• v.23 no.1
• /
• pp.13-21
• /
• 2022

Masonry constructions exhibit uncertain behaviors under dynamic effects such as seismic action. Complex issues arise in the idealization of structural systems of buildings having different material types and mechanical properties. In this study, the structural behavior of a vaulted masonry building constructed using full clay brick and lime-based mortar and sitting on consecutive arches was investigated by experimental and numerical approaches. The dimensions of the structure built in the laboratory were 391 × 196 cm, and its height was 234 cm. An incremental repetitive loading was applied to the prototype construction model. Along the gradually increasing loading pattern, the load-displacement curves of the masonry structure were obtained with the assistance of eight linear displacement transducers. In addition, crack formation areas, and relevant causes of its formation were determined. The experimental model was idealized using the finite element method, and numerical analyses were performed for the area considered as linear being under similar loading effect. From the linear analyses, the displacement values and stress distribution of the numerical model were obtained. In addition, the effects of tie members, frequently being used in the supports of curved load-bearing elements, on the structural behavior were examined. Consequently, the experimental and numerical analysis results were comparatively evaluated.

• Journal of Engineering Education Research
• /
• v.24 no.2
• /
• pp.3-11
• /
• 2021

In the COVID-19 era, it was implemented to be used as a basic material for setting the direction of learning support and student guidance for university institutions and professors who are experiencing confusion. The purpose of this study is to compare the actual status of daily-routines of COVID-19 period, general semester period, and vacation period, and to examine whether there is a difference between the period of general semester and COVID-19 period, and whether there is a difference in daily use of COVID-19 period depending on grade. For this reason, a questionnaire survey was conducted from April 23 to 29, 2020, targeting students of University A, which is a small-scale technical centered university in the region, and 754 students answered. As a result of the study, first of all, when we looked at the trends in the use of daily-routines by period of general semester, vacation period, and COVID-19 period, the trends of the general semester period and COVID-19 period were similar in the areas of learning and self-development. Second, there were statistically significant differences in sleep, relaxation, learning and other areas between the period of the general semester and the duration of COVID-19. Third, there were statistically significant differences over grade in relaxation, learning, development, and other areas.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.45 no.2
• /
• pp.70-77
• /
• 2022

Wet-spun regenerated silk fibroin (RSF) fibers have been extensively studied owing to their 1) useful properties as biomaterials, including good blood compatibility and cyto-compatibility; 2) the various methods available to control the structural characteristics and morphology of the fiber, and 3) the possibility of fabricating blended fibers and new material-embedded fibers. In this study, silk nanofibrils prepared using a new method were embedded in RSF to fabricate wet-spun silk nanofibril/RSF composite fibers. Up to 2% addition of silk nanofibril, the silk nanofibril/RSF dope solution showed slight shear thinning, and the G' and G" of the dope solution were similar. However, above 3% silk nanofibril content, the viscosity of the dope solution significantly increased. In addition, shear thinning was remarkably evident, and the G' of the dope solution was much higher than the G", indicating a very elastic state. As the silk nanofibril content was increased, the wet-spun silk nanofibril/RSF composite fiber became uneven, with a rough surface, and more beaded fibers were produced. Scanning electron microscopy observations revealed that the beaded fibers were attributed to the inhomogeneous dispersion and presence of agglomerates of the silk nanofibrils. As the silk nanofibril content and RSF concentration increased, the maximum draw ratio decreased, indicating the deterioration of the wet spinnability and post-drawing performance of silk nanofibril/RSF.

• Advances in nano research
• /
• v.12 no.2
• /
• pp.139-150
• /
• 2022

This paper presents sets of explicit analytical equations that compute the static displacements of nanobeams by adopting the nonlocal elasticity theory of Eringen within the framework of Euler Bernoulli and Timoshenko beam theories. Castigliano's theorem is applied to an equivalent Virtual Local Beam (VLB) made up of linear elastic material to compute the displacements. The first derivative of the complementary energy of the VLB with respect to a virtual point load provides displacements. The displacements of the VLB are assumed equal to those of the nonlocal beam if nonlocal effects are superposed as additional stress resultants on the VLB. The illustrative equations of displacements are relevant to a few types of loadings combined with a few common boundary conditions. Several equations of displacements, thus derived, matched precisely in similar cases with the equations obtained by other analytical methods found in the literature. Furthermore, magnitudes of maximum displacements are also in excellent agreement with those computed by other numerical methods. These validated the superposition of nonlocal effects on the VLB and the accuracy of the derived equations.

• Membrane Journal
• /
• v.33 no.2
• /
• pp.53-60
• /
• 2023

Mechanical energy can be harvested by triboelectric nanogenerators (TENG) from biological and environmental systems. In wearable electronics, TENG has a lot of significance as biomechanical energy can be harvested from the motion of humans, which is applied in vibrational sensors. Wearable TENG is prone to moisture and polytetrafluoroethylene (PTFE) is an excellent hydrophobic material used in these applications. The presence of highly electronegative fluorine atoms leads to very low surface energy. At the same time, the performance of the device increases due to the efficient capture of the electrons on the microporous membrane surface. This similar behavior occurs with polyvinylidene fluoride (PVDF) due to the presence of fluoride atoms, which is relatively less as compared to PTFE.

• Annual Conference of KIPS
• /
• 2010.11a
• /
• pp.1388-1391
• /
• 2010

In this paper, we present a design and implementation of U-learning system using pen based augmented reality approach. Student has been given a smart pen and a smart study book, which is similar to the printed material already serviced. However, we print the study book using CMY inks, and embed perceptually invisible dot patterns using K ink. Smart pen includes (1) IR LED for illumination, IR pass filter for extracting the dot patterns, and (3) camera for image captures. From the image sequences, we perform topology analysis which determines the topological distance between dot pixels, and perform error correction decoding using four position symbols and five CRC symbols. When a student touches a smart study books with our smart pen, we show him/her multimedia (visual/audio) information which is exactly related with the selected region. Our scheme can embed 16 bit information, which is more than 200% larger than previous scheme, which supports 7 bits or 8 bits information.

• Earthquakes and Structures
• /
• v.25 no.3
• /
• pp.161-175
• /
• 2023

High-damping rubber bearings (HDRB) are commonly used as seismic isolation devices to protect civil engineering structures from earthquakes. However, the nonlinear hysteresis characteristics of the HDRB, such as their dependence on material properties and hardening phenomena, make predicting their behavior during earthquakes difficult. This study proposes a hysteretic model that can accurately predicts the behavior of shear deformation considering the nonlinearity when designing the seismic isolation structures using HDR bearings. To model the hysteretic characteristics of the HDR, dynamic loading tests were performed by applying sinusoidal and random waves on scaled-down specimens. The test results show that the nonlinear characteristics of the HDR strongly correlate with the shear strain experienced in the past. Furthermore, when shear deformation occurred above a certain level, the hardening phenomenon, wherein the stiffness increased rapidly, was confirmed. Based on the experimental results, the dynamic characteristics of the HDR, equivalent stiffness, equivalent damping ratio, and strain energy were quantitatively evaluated and analyzed. In this study, an improved bilinear HDR model that can reproduce the dependence on shear deformation and hardening phenomena was developed. Additionally, by proposing an objective parameter-setting procedure based on the experimental results, the model was devised such that similar parameters could be set by anyone. Further, an actual dynamic analysis could be performed by modeling with minimal parameters. The proposed model corresponded with the experimental results and successfully reproduced the mechanical characteristics evaluated from experimental results within an error margin of 10%.

• Journal of the Korean Wood Science and Technology
• /
• v.51 no.5
• /
• pp.321-333
• /
• 2023

In this study, lignin, a lignocellulosic biomass, was chemically modified to produce polyethyleneimine-grafted lignin (PKL) with maximum hexavalent chromium [Cr(VI)] adsorption capacity. Changes in the physicochemical properties due to the cationization of lignin were confirmed through elemental analysis, Fourier transform infrared spectroscopy, and moisture stability evaluation. Alginate (Alg) beads containing PKL (Alg/PKL) were prepared by incorporating cationic lignin into the Alg matrix to apply the prepared PKL in a batch-type water treatment process. The optimal Alg/lignin mixing ratio was selected to increase the Cr(VI) adsorption capacity and minimize lignin elution from the aqueous system. The selected Alg/PKL beads exhibited an excellent Cr(VI) removal capacity of 478.98 mg/g. Isothermal adsorption and thermodynamic analysis revealed that the Cr(VI) removal behavior of the Alg/PKL beads was similar to that of heterogeneous chemical adsorption. In addition, the bulk adsorbent material in the form of beads exhibited adsorption behavior in three stages: surface adsorption, diffusion, and equilibrium.

• Journal of the Korean Society for Precision Engineering
• /
• v.14 no.1
• /
• pp.58-68
• /
• 1997

In order to provide economic high-quality products to customers in a timely manner, companies have tried much effort to decrease the time period of engineering design and information management. As a part of this effort, we have developed the Drawing Information Management System(DIMS) based ofn GT(Group Technology) that could decrease design processing time by speedy and rational management of design processes. The characteristics of DIMS are as follows: First, the concept of Concurrent Engineering was applied to DIMS. Through LAN, reviewers are able to attach comments to dlectronic documents by anno- tation functions called Mark-up. The reviewer annotations are collected and combind with the original document to revise the documents. Second, we have developed a Classification and Coding(C&C) system suitable for electronic component parts bassed on GT(Group Technology). The C&C system makes both parts and drawing with similar characteriscs into families and helps users search existing documents or create new drawings promptly. Finally, DIMS provides the Engineering BOM(Bill of Material) using the concept of Family BOM based on model options.