• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.15 no.3
• /
• pp.79-85
• /
• 2016

Truing process is a very important process for recovering the shape of wheels worn by continuous grinding operation. In this study, the devices, controller, and spindle for electro-discharge truing were developed, and the electro-discharge truing method was applied to metal-bonded grinding wheels and compared with the conventional truing method. The shapes of the grinding wheels were measured by a surface profile measurement device. The protrusion of abrasives on the surface of the wheels was compared with the conventional truing method using an optic microscope measurement device. The experimental results showed that the performance of the electro-discharge truing method, in terms of the protrusion of abrasives on the surface of the wheels and the recovery of the shape of the worn wheels, was similar to that of the conventional truing method.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.17 no.2
• /
• pp.103-108
• /
• 2018

In interrupted cutting, the workpiece has a groove that impacts both the cutting tool and the workpiece. Therefore, cutting tool damage occurs rapidly. In this study, I performed interrupted cutting of carbon steel for machine structures (SM20C) using an uncoated carbide tool (SNMG120404, P20), and observed tool damage, cutting chip shape, and the workpiece surface. Results: Under the specific cutting conditions of feed rate = 0.066 mm/rev, cutting speed = 120 m/min, and depth of cut = 0.1 mm; and feed rate = 0.105 mm/rev, cutting speed = 120 m/min, and depth of cut = 0.2 mm, the observed tool damage was small. Similar chip shape was observed (Expt. No. 1, 3, 7). Workpiece damage was observed (Expt. No. 3, 5, 7, 9).

• Food Science and Biotechnology
• /
• v.16 no.3
• /
• pp.444-450
• /
• 2007

The antioxidant activity and isoflavone content of chokong, Rhynchosia nolubilis seeds pickled in vinegar at $4^{\circ}C$ for 2 weeks, were investigated. The polyphenol content and 2,2-diphenyl-1-pycrylhydrazyl (DPPH) radical-scavenging capacity were lower in chokong than in raw seeds. Based on isoflavone analysis, the aglycone (daidzein and genistein) content was high in chokong while the content of the corresponding glucosides (daidzin and genistin) was similar to that in raw seeds. Thermal processing, in which seeds were heated in vinegar at $121^{\circ}C$ for 20 min, reduced the polyphenol content but did not affect the DPPH radical-scavenging capacity compared to the pickling process. The heated seeds had a 2.6 to 2.7 times higher glucoside content and 51 to 55% lower aglycone content than chokong, depending on the kind of vinegar used. During pickling and thermal processing, vinegars were more effective at eluting antioxidants and isoflavones from seeds than other solutions such as acetic acid, citric acid and HCl solutions, distilled water, and phosphate buffer (pH 7.0).

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2003.05a
• /
• pp.230-235
• /
• 2003

In the micro hole punching, the size and shape of burr and burnish zone are very important factors to evaluate quality of micro holes which depend on punch-die clearance, stain rate, workpiece material and etc. To get micro holes with small burr and wide burnish zone for industrial demands, not only the parametric study but also a study on fracture behavior in shear band are necessary. In this study, 100 $\mu\textrm{m}$, 25 $\mu\textrm{m}$ micro holes in diameter were fabricated on brass (Cu63/Zn37) and SUS 316 foils as aspect ratio 1:1, and the characteristics of micro holes was investigated comparing with man holes over several mm by scanning electron microscopic views and section views. Like macro hole, micro hole is also composed of 4 portions, rollover, burnish zone, fracture zone and it shows similar fracture behavior in shear band, but？ by high strain rate (10$^2$∼ 10$^3$s$\^$-1/) unlike macro hole fabrication and increment of relative grain size several different results are shown.

• Journal of Veterinary Clinics
• /
• v.16 no.1
• /
• pp.1-7
• /
• 1999

The purpose of the present study was to evaluate the easiness of suture and fixation of modified total ring prostheses (m-TRP). Twelve healthy dogs (B.W.2-10 kg) were randomly assigned to three groups. In group A (3 dogs), total ring prostheses was fixed by penetrating a suture material through tracheal mucosa. In group B (3 dogs), TRP was fixed by suturing on tracheal cartilage and muscular layer not penetrating through tracheal mucosa. m-TRP was applied to the cervical portions (group M-C,3 dogs), and thoracic portions (group M-T,3 dogs). Operating time of group M-C (37.33$\pm$6.80 min.) was shorter than those of groups B (83.33$\pm$8.50 min.) and A (63.33$\pm$11.06 min.) (p＜0.01). Clinical complications were minimal and limited to mild, short-term hematoma, vomiting, edema, and inflammation. Coughing remarkably decreased in group B rather than group A. Dyspnea was not showed in group A, B, and M-C, but group M-T had a mild dyspnea. Gross postmortem findings were similar in all groups. Mild adhesions were present between prostheses and adjacent structures, but tracheal lumen was clean. Severe adhesions were present where m-TRP had been applied in the thoracic portions. Histopathologic abnormalities included mild to moderate adventitial and periprosthetic fibrosis and mild adventitial inflammation. The present study indicated that m-TRP were easier in suture and fixation than TRP and had no differences in support for trachea and side effects.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.46 no.1
• /
• pp.29-38
• /
• 2014

Guar gum is added to the pulp suspension at the suction side of the fan pump just before the sheet is formed on either a fourdrinier or cylinder machine. Guar gum replaced and supplements these hemicelluloses in paper bonding with many advantages, which include improved sheet formation with a more random distribution of pulp fibers. But, guar gum has serious storage problem. This material has easily decayed after High-temperature conditions such as summer. In this study, various properties of cotton handsheet were measured to solve the problem of deformation while storing guar gum and to improve the durability. After aging, which is one of the durability tests, cotton handsheet with 0.2% and 0.3% of A-PAM showed improved mechanical properties and bursting index and folding endurance of cotton handsheet with 0.3% of A-PAM were similar to those with guar gum. The yellowness loss of cotton handsheet with synthetic polymers was lower than those with guar gum.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.48 no.3
• /
• pp.99-106
• /
• 2016

Our aim was to identify the potential of reed stalk as a raw materials for biomass pellet production. Compared to woody biomass, reed stalk contained significant levels of ash. The holocellulose content of reed stalk was similar to that of larch, but the lignin content of reed stalk was lower than that of larch. In the elemental analysis, chlorine content of reed stalk was much higher than that of larch, and satisfied only the mixed biomass pellet B of European non-woody pellet standards(EN 14961-6). In quantitative analysis of the ash, heavy metals contents of reed stalk satisfied European non-woody pellet standards. Higher heating value of oven-dried reed stalk pellet was slightly lower than that of larch wood pellet. The durability of reed stalk pellet was lower than that of larch wood pellet. The results of this study indicate that reed stalk might be used as a raw material of mixed biomass pellet B.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.48 no.1
• /
• pp.134-141
• /
• 2016

Dampening in printing is not only used with plain water but also used with various substances like dampening additive, in order to improve the wetting property by lowering the surface tension and to control material for modifing the ink transfer characteristic with proper emulsification. We have studied the printing quality according to these, looking into interrelationship among the dampening solution's pH, electrical conductivity and IPA content, prescribing the proper usage and minimum usage of fountain solution and dampening additive. In this study, it shows good result when mixing at the 7 wt% dampening with additive solution, which is result from the color density of printed sheets in accordance with the change of dampening solution condition. And the printed density value calculated 1 hour after printing, it shows relatively safe value at the etch liquid 4 wt% and IPA addition 2 wt%. The dry down at this test showed similar results regardless of various dampening conditions on coated paper, but in case of uncoated paper, the dry down showed a quite gap of different due to the fast penetration to the paper.

• Korean Journal of Materials Research
• /
• v.17 no.12
• /
• pp.637-641
• /
• 2007

The total energy and strength of Mg alloy doped with Al, Ca and Zn, were calculated using the density functional theory. The calculations was performed by two programs; the discrete variational $X{\alpha}\;(DV-X{\alpha})$ method, which is a sort of molecular orbital full potential method; Vienna Ab-initio Simulation Package (VASP), which is a sort of pseudo potential method. The fundamental mixed orbital structure in each energy level near the Fermi level was investigated with simple model using $DV-X{\alpha}$. The optimized crystal structures calculated by VASP were compared to the measured structure. The density of state and the energy levels of dopant elements was discussed in association with properties. When the lattice parameter obtained from this study was compared, it was slightly different from the theoretical value but it was similar to Mk, and we obtained the reliability of data. A parameter Mk obtained by the $DV-X{\alpha}$ method was proportional to electronegativity and inversely proportional to ionic radii. We can predict the mechanical properties because $\Delta{\overline{Mk}}$is proportional to hardness.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2006.11a
• /
• pp.17-20
• /
• 2006

Korean traditional houses have been developed in sympathy with natural environment and formed comfortable indoor condition by properly using surrounding natural resources including building layout, space construction and material our traditional wooden windows adjusting ambient temperature and humidity have both the functions of window and door, although they are clearly divided in the West. While window paper is attached from the outside in China and Japan, it is attached from the inside in Korea. The opening and closing mode of windows is similar and their dimensions are shown not to he standardized but diverse in terms of the characteristic of wooden furniture and that of components placed between columns. Thus this study is to look into the performance of band-lattice door of a typical traditional one by observing changes in sound absorption characteristics according to difference in thickness and finishing method of window paper and those in sound absorption characteristics with the changed thickness of air layer in traditional windows and doors.