• Journal of Periodontal and Implant Science
• /
• v.25 no.1
• /
• pp.146-152
• /
• 1995

A mucogingival grafting procedure has been developed to cover denuded root surfaces. The subepithelial connective tissue graft is composed of a free connective tissue graft and an overlying pedicle graft. The source of connective tissue graft were trap door approach and thining of a full thickness palatal flap. The purpose of this study was compare a two different connective tissue obtaining method. In this study, where palatal pocket was present, pocket elimination was performed, and the tissue normally discarded after thinning of the palatal flap was used as a grafting material. The results were as follows : 1. The mean difference between trap door approach and thinning procedure for root coverage were $2.1{\pm}O.lmm$, $2.2{\pm}O.2mm$. 2. The mean difference between trap door approach and thinning procedure for pocket depth change were $O.2{\pm}O.lmm$, $O.2{\pm}O.2mm$. 3. The mean difference between trap door approach and thinning procedure for attachment gain were $2.1{\pm}O.2mm$, $2.4{\pm}O.2mm$. 4. The esthetics in recipient site, both color match and tissue contour, were acceptable to the patient in all cases. 5. Therefore, thinning procedure were similar to trap door approach in root coverage effect.

• Journal of the military operations research society of Korea
• /
• v.36 no.1
• /
• pp.29-38
• /
• 2010

In Korea weapon system acquisition processes, it's required a cost estimation report obtained from a commercial cost model. The PRICE model is generally used as a cost estimation model in Korea. However, the model uses American historical R&D data and it's output cost component is different from our cost component of defense accounting system. Also, we found that estimating results show about 10% of difference when we comparing with actual costs in 44 finished weapon acquisition projects. There are some limitations in calibration to increase an accuracy of the PRICE model because it's difficult obtain good real input data, detailed cost and technical data in low level WBS. So, only 8% of the defense R&D projects are calibrated and validation of calibration results is more difficult. Therefore, we studied the standard calibration process and performed the calibration about the MCPLXS/E parameters of the PRICE model based on actual cost data. In order to obtain a good calculation result, we collected the actual material costs from the defense industry companies. Our results can be used for an reference in similar weapon system R&D and production cost estimation cases.

• Asian Journal of Turfgrass Science
• /
• v.13 no.1
• /
• pp.1-20
• /
• 1999

This study was carried out to investigate the interaction between productivity and light condition and to analyze the material productivity and productive charactaristics under different hours of light in Zoysia japonica. 1. Rate increasement of leaf number and total leaf length was remarkably high at the early growth stage in the control and 9 hour light treatment. The rate gradually decreased as growth proceeded. But 3 hour treatment was very low in the rate from its early growth stage through the whole test period. 2. The increasing rate of leaf area ratio (LAR) in all the experimental plots was remarkably high at the early growth stage after transplanting the grass. The shorter photoperiod resulted remarkable lower increasement of LAR. 3. The rhizome growth rate of the 9 hour photoperiod was high contrast to the 3 hour photoperiod treatment. The increasing rate of node number was also showed similar trend. 4. Chlorophyll content was very high at the 36 days after transplanting and then decreased gradually. Chlorophyll content on 3 hours photoperiod plot severely decreased. The ratio of chlorophyll a to b was decreased significantly at short day treatment. 5. The content of soluble sugar was increased at shorter photoperiod. The highest ratio of sugar content was on August, 28 by HPLC method. Such a result was attributed to accumulation of sugar in spite of low synthesis of ploysacchrides, translocation by low consumption. 6. The increasing rate of standings in all light treatment was high at the early growth stage after transplanting. Short photoperiod treatment by 3hour showed especially low prganic productivity on Zoysia japonica.

• The Research Journal of the Costume Culture
• /
• v.15 no.5
• /
• pp.749-759
• /
• 2007

As the traditional style is treated as one of the important themes in fashion recently, how to apply the formative character in Korean and Japanese traditional dress to modern fashion is searched through actual analysis of photograph material, Both design formative elements were confirmed by clothing and fashion department majors through visual data so that 20 pieces of them were selected as final analysis object. Korean traditional dress form in modern fashion emphasizes curvaceousness as plane division. On the other hand, that of Japanese shows straight line, layered, belt, big look through up & down connection style. Color in Korean traditional dress prefers white and original color and modern fashion displays the natural beauty through harmony of similar colors ; that of Japanese based on natural color such as persimmon color cherishes natural beauty and implicit moderation showing harmony of various original color with brilliance and neutral color. While texture in Korean traditional dress was fine and exquisite, that of Japanese preferred coarse and tactile ones. In motif, Korea was natural and geometric but Japanese variously used complex and geometric ones. Likewise, the result suggests that the formative character in Korean and Japanese modern fashion affects the modern dress format as new aesthetic sense and takes on more complicated and subtle aspect in basic form, not just use so far.

• Proceedings of the Korean Society of Life Science Conference
• /
• 2002.12a
• /
• pp.48-60
• /
• 2002

Granulocyte-macrophage colony-stimulating factor (GM-CSF) is a cytokine that stimulates the production of granulocytes, macrophages, and white blood cells. The effects of osmotic pressure on secretion of human GM-CSF into the culture medium were investigated in suspension cultures of transgenic tobacco cells. An increase in osmotic pressure caused by the addition of mannitol decreased the cell size index, with the effect being more pronounced when cells were measured wet rather than dry. Increased osmotic pressure enhanced the secretion of hGM-CSF. At 90 g/L mannitol, the maximum concentration tested, hGM-CSF was present in the culture medium at 980 ug/L. As the concentration of mannitol increased, the total amount of protein secreted also increased, but was disproportionately enriched in GM-CSF NaCl, another osmoticum, had very similar effects on cell growth and hGM-CSF production, but did not cause enrichment for hGM-CSF Additionally, protein-stabilizing polymer was added to culture broth to enhance stability of secreted recombinant protein. Finally, above two method were applied together to maximize the productivity.

• Resources Recycling
• /
• v.10 no.3
• /
• pp.3-13
• /
• 2001

The Korean Auto industry has developed remarkably over the past 30 years. In 2000 alone, Korea produced 3.11 million vehicles, and the number of vehicles registered surpassed the ten million mark. As the number of vehicles registered in Korea has increased, yew after you, a rising number of cars have been scrapped. In 2000, a total of 455,592 automobiles were scrapped, up dramatically from only 101,158 in 1989. The system for handling of ELV(End-of-Life Vehicles) in Korea is governed by the "Motor Vehicle Control Act". The Act places the responsibility for vehicle scrapping directly on the vehicle owners. h vehicle owner can only can eel a vehicle registration after he gets a certificate from an authorized vehicle dismantler showing that his vehicle was properly scrapped according to the law. The take-back rate of ELV reaches nearly 100% in Korea. The vehicle scrapping process in Korea is very similar to those in other countries. fluids such as fuels and oils are first removed, and recyclable parts are collected and separated. Engines and transmissions are dismantled and recycled for use as raw material. Plastics, which are not easily reused, are generally treated as industrial wastes. The "Motor Vehicle Control Act" prohibits reuse of certain parts in order to guarantee the safety of the used auto parts. However, some restrictions on the reuse of auto parts have recently been eased to promote recycling. In this paper, additionally, car recycling policy of the foreign countries such as Japan, Germany and EU were reviewed.

• Journal of Veterinary Clinics
• /
• v.13 no.2
• /
• pp.184-194
• /
• 1996

A comparative study of three absorbable suture materials of chromic catgut, Dexon II (a polyglycolic acid suture with a polycaprolate coating system) and Coated Vicryl (a polyglactin 910 suture with a glycolide-lactide-calcium stearate coating system) was undertaken in terms of tensile strength, breaking elongation, appearances of the suture materials in the subcutaneous layer of rats and of tissue reaction in the intramuscular layer of rats. The initial tensile strength of chromic catgut and the tensile strength after 21 days were about 1.55 kg and 0.19 kg, respectively. Those of Dexon II were about 2.01 kg and 0. 20 kg, respectively. Those of Coated Vicryl were about 2.39 kg and 0.48 kg, respectively. Coated Vicryl showed the highest tensile strength among the three materials during the whole period. On the other hand, Dexon II showed the highest breaking elongation among the three materials during the first week. But the breaking elongation of Dexon II rapidly continuously decreased during the whole period. The appearances of the suture materials in the subcutaneous layer of rats showed that chromic catgut was the fastest among the three materials, whereas it formed comparatively much connective tissue. The intramuscular absorption rate and tissue reaction of Dexon II were similar to those of Coated Vicryl. The intramuscular absorption rate of these was fairly late when compared with chromic catgut. And the tissue reaction appearance of these showed the formation of a granuloma with foreign body giant cells, macrothages and epitheloid cells by the 28th day in the experimental period.

• Journal of Ocean Engineering and Technology
• /
• v.31 no.6
• /
• pp.379-387
• /
• 2017

In this study, a pile-guide mooring system (PGMS) was designed for an offshore liquefied natural gas bunkering terminal (LNG-BT), which is an essential infrastructure for large LNG-fuelled ships. The PGMS consisted of guide piles to restrict five motions of the floater, except for heave, as well as a seabed truss structure to support the guide piles and foundation piles to fix the system to the seabed. Singapore port was considered for a case study because it is a highly probable ports for LNG bunkering projects. The wave height, current speed, and wind speed in Singapore port were investigated to calculate the environmental loads acting on the hull and PGMS. A load and resistance factor approach was used for the structural design, and a finite element analysis was performed for design verification. The steel usage of the PGMS was analyzed and compared with the material usage of a gravity-based structure under similar LNG capacity and water depth criteria. This paper also describes the water depth limit and wave conditions of the PGMS based on estimation of the initial investment and the present value profit difference. It suggests a suitable LNG-BT support system for various design conditions.

• The Korean Journal of Ecology
• /
• v.26 no.5
• /
• pp.263-266
• /
• 2003

This research investigated the process of removing cadmium and tested the detoxification mechanism of the cadmium-binding peptide (Cd-BP) from Rumex crispus. Phytochelatin-like cadmium-binding peptide (PC-Cd-BP) of Rumex crispus was purified and identified. Rumex crispus was exposed to 4.3 mg Cd/L for seven days. Heat-treated supernatant fraction taken by root tissues showed traces of PC-Cd-BP An analysis of the material through Gel-filteration chromatography on the Sephadex G-75 column showed two symmetrical Cd-BP peaks. The major peak with the smaller molecular weight was further purified by $C_{18}$ reverse-phase HPLC to produce apparent homogeneity. The amino acid composition of Cd-BP from Rumex crispus included cysteine (22.6%), glutamate and glutamate acid (20%), and glycine (12%). It was similar the amino acid composition of most PC. The molecular weight of the purified peptide was determined at 568-706 Da by MALDI-TOF MS. Therefore, the Cd-BP of Rumex crispus was PC-Cd-BP consisting of isopeptides.

• Phonetics and Speech Sciences
• /
• v.8 no.4
• /
• pp.71-78
• /
• 2016

The purpose of this study is to investigate the effect of Japanese(L1) on the production of Korean accentual phrases(L2). Korean and Japanese have a similar prosodic structure. But different from Korean, Japanese is a pitch accent language. So each word has its own pitch accent. And pitch accents are maintained in the sentence intonation. This difference will have a negative influence on the production of Korean sentence intonation. For this study 4 Korean natives speakers and 10 advanced Japanese learners of Korean participated in the production test. The material analysed constituted 11 Korean sentences, six of which contain formally identical Sino-Korean and Sino-Japanese words. The results show that the initial pitch pattern of Korean accentual phrases was affected by Japanese pitch accent types and this interference was greater for formally identical Sino-Korean and Sino-Japanese words. But besides initial tones of accentual phrase, some positive interference was observed in the internal tonal pattern of accentual phrase. In the phonetic realization, the internal pitch range and initial pitch rising of accentual phrases was greater for Japanese learners of Korean than native speakers of Korean.