• 한국생산제조학회지
• /
• 제22권1호
• /
• pp.45-49
• /
• 2013

It is important to have a well developed strain energy function in order to understand the mechanical behavior of biomaterial like the blood vessel of artery. However, since it is not possible to have a complete form of strain energy function of artery, theoretical framework describing the behaviour of Rubber-like material which is similar to blood vessel is applied to infer useful forms of strain energy function of biomaterial. Based on Chuong-Fung model and Mooney-Rivlin model, material parameters are estimated based on experimental data. From the results, it can be inferred that the estimated parameters can be used to explain the difference of mechanical characteristics between normal vessel and vessel with stent.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2008년도 하계종합학술대회
• /
• pp.341-342
• /
• 2008

A conductivity of soot at microwave frequency is presented using a novel technique for complex permittivity of materials. The method overcomes limitations of conventional methods which are cavity perturbation and transmission/reflection method. Resonant frequencies and Q factors are measured and simulated for the cylindrical cavity, and they are compared to each other. Similar material property of both real material and simulation material produce similar values of resonant frequency and Q factor. The complex permittivity of material can be determined by simulating the cavity to change material property until the simulation results are nearly the same as the measurement results. Cylindrical cavity has been realized for measurement at 880 MHz, and conductivity of soot is measured. A sample was made by depositing the soot on the glass. The proposed method shows that the conductivity of soot is 11 S/m.

• Journal of Welding and Joining
• /
• 제12권3호
• /
• pp.63-70
• /
• 1994

Laser processing workmen should select the working condition for laser cutting of new materials by the preparatory experiments for that material or from the past experiences in cutting of other similar materials. This paper proposes a criterion to determine how much a material is similar to other materials by using the Sugeno fuzzy integral. With the proposed criterion the laser processing workman can objectify the considered material for his decision. The expert system programmer can give the system a high flexibility by experimenting with some materials in a large range of similarity and can support the laser processing workman by offering the similarity between materials.

• 한국생산제조학회지
• /
• 제22권1호
• /
• pp.50-55
• /
• 2013

In order to understand the biomaterial like the blood vessel of artery, there is a need to quantify the biomechanical behavior of the vessel. However, theoretical framework to describe and quantify the behaviour of blood vessel was not well established so far. For studying the biomechanical behavior of artery, Rubber-liked material which is similar to passive artery is selected since conventional theoretical interpretation is very limited to understand and predict the behavior of biomaterial. Rubber-like material is assumed to be very similar to artery and has properties of isotropy, homogeneity and is undergoing large deformation. Based on this assumption, stress developed on Rubber-like material is described by strain energy function and strain invariants which are required to understand the nonlinear elastic behavior of biomaterial. The descriptor which would be used for understanding the biomechanical behavior of artery is studied in this work.

• 펄프종이기술
• /
• 제46권3호
• /
• pp.11-19
• /
• 2014

Reliability of the novel automatic system capable of measuring both St$\ddot{o}$ckigt sizing degree and contact angle at a time was evaluated through the calculation of its repeatability and reproducibility based on TAPPI Standard Method T 1200. As the basis weight of paper specimen increased, the repeatability and reproducibility of the automatic system became more improved than those from Hercules sizing test and contact angle test designated on TAPPI Standard Method T 530 and T 558. The more improved repeatability and reproducibility implies that a single tester can obtain the similar results under similar test conditions in spite of repetitive testing using the automatic system, and likewise that multiple testers can respectively reproduce similar data without big variation from the same paper specimen using the automatic system. In conclusion, this study is greatly meaningful in having developed the world's first automatic system to measure both St$\ddot{o}$ckigt sizing degree and contact angle simultaneously with excellent repeatability and reproducibility.

• Steel and Composite Structures
• /
• 제31권4호
• /
• pp.409-417
• /
• 2019

The choice of individual material for industrial application is primarily based on knowledge of its behavior in similar applications and similar environmental conditions. Contemporary design implies knowledge of material behavior and knowledge in the area of structural analysis supported by large capacity computers. Bearing this in mind, this paper presents and analyzes the experimental results related to the mechanical properties of the material considered (30CrNiMo8/1.6580/AISI 4340) at different temperatures as well as its creep and fatigue behavior. All experimental tests were carried out as uniaxial tests. The test results related to the mechanical properties are presented in the form of engineering stress-strain diagrams. The results related to the creep behavior of the material are shown in the form of creep curves, while the fatigue of the material is shown in the form of stress - life (S - N) diagram. Based on these experimental results, the values of the following properties are determined: ultimate tensile strength (${\sigma}_{m,20}=696MPa$), yield strength (${\sigma}_{0.2,20}=355.5MPa$), modulus of elasticity ($E_{,20}=217GPa$) and fatigue limit (${\sigma}_{f,20,R=-1}=280.4MPa$). Results related to fatigue tests were obtained at room temperature and stress ratio R = -1.

• 미래기술융합논문지
• /
• 제1권2호
• /
• pp.19-25
• /
• 2022

방사선 차폐 물질인 납을 대신하여 싸고 친환경적인 산화철, 알루미나로 차폐체를 제작 후 차폐체의 성능을 평가하고자 한다. 산화철과 알루미나 각각 석고와 혼합하여 차폐체를 제작 이후 X-ray Tube를 이용하여 석고보드, 납복과 비교하여 성능을 평가한다. 관전압에 변화를 주며 실험한 결과 알루미나의 차폐 성능은 석고보드보다 차폐 성능이 떨어졌으며 50%의 알루미나가 함유되었을 때 석고보드와 차폐 성능이 비슷하였다. 산화철은 약 75%가 함유되었을 때 납복의 차폐 성능과 비슷해졌다. 알루미나를 이용한 차폐체는 석고와 비슷한 차폐 성능을 보여줘 납 대체물질로 적합하지는 않다. 하지만 산화철은 납복과 비슷한 차폐 성능을 나타내어 향후 납을 대체하는 X선 차폐 물질로 활용이 가능하기에 추가 연구가 필요하다.

• 한국소프트웨어감정평가학회 논문지
• /
• 제17권1호
• /
• pp.25-30
• /
• 2021

임베디드 시스템 소스코드 감정목적물의 유사성을 판단하는 경우, 제공된 소스코드가 컴파일이 가능한 상태인지, 실행이 정상적으로 되는 것인지, 하드웨어와의 인터페이스가 일치하는지 등의 확인이 되지 않은 상태로 제공되는 경우가 지속적으로 발생하고 있다. 분쟁을 제기하는 측에서는 동작의 특성이 유사하고, 나타나는 기능의 효과가 유사한 이유로 소스코드의 많은 부분이 유사할 것으로 판단하고, 감정을 요청하게 되지만, 위의 여러 가지 상황으로 유사성 분석 결과가 기대와 다르게 나타나는 가능성이 우려된다. 본 연구에서는 감정사례를 통해 소스코드의 분석 과정과 검증되지 않은 소스코드의 유사성 도출의 개선방향을 제시한다.

• 한국생산제조학회지
• /
• 제21권5호
• /
• pp.697-701
• /
• 2012

Numerical modeling for a coke dry quenching process was developed and evaluated. The cokes had similar characteristics to a porous material, therefore, its quenching analysis was simplified as a cooling process of porous blocks. A uniform inlet temperature and constant properties of materials in the oven were also assumed. With given operating conditions, temperature profiles in the cokes were calculated and compared to the actual values. The calculated temperature gradient was high at the upper part of the coke flow and the cooling rate decreased as cokes came down to the exit port. The exit port temperature of cokes was similar to the measured value, however, temperature-dependent material properties and operating conditions must be considered to predict the temperature precisely. The calculated results could be applied to design a coke oven to produce high quality cokes.

• 영어어문교육
• /
• 제15권2호
• /
• pp.121-150
• /
• 2009

This paper deals with contrastive analysis and interlanguage with respect to adjective ordering. It aimed to investigate how similar and different the orders of descriptive adjectives are in English and Korean, and how Korean EFL learners perceive the sequences of English descriptive adjectives. Data were collected from native English speakers and native Korean speakers and Korean EFL learners. The contrastive analysis showed that the order of English adjectives was size, opinion, condition, age, color, shape, material, and origin, whereas the Korean order was condition, age, opinion, color, size, shape, material, and origin. The relative order of the interlanguage was shown to be age, size, opinion, shape, condition, color, origin, and material, with the exceptions of the order of condition preceding age and that of size being the same position as condition. The interlanguage data manifested different aspects of ordering when compared with English and Korean: Some adjective combinations were similar to both English and Korean; Some were different from English or Korean; Some were different from both English and Korean. These ordering patterns are discussed in terms of such principles as the nouniness principle, the subjectivity/objectivity principle, the iconic principle, etc. On the basis of these results, some helpful suggestions are made.