• 한국식품저장유통학회지
• /
• 제4권3호
• /
• pp.251-258
• /
• 1997

The quality changes of strawberries packaged using low density polyethylene (LDPE) film filled with 3% silver-coated ceramic (WC30) and filled with it and 0.1% chitin (CWC) were investigated during storage at 2$0^{\circ}C$ for 5 days. In gas composition within film bag, CWC and WC30 kept higher CO2 concentration than LDPE without silver-coated ceramic and chitin (CO) did during 5 day storage. The weight loss of strawberries during storage was the smallest in WC30 and the largest in CWC in 5 days. Hardness of strawberries was the highest in WC30 and the lowest in CO during 5 day storage. pH of strwberries was increased a little until 1 day and was not changed after 1 day storage, and soluble solid content was not changed during storage. Vitamin C content was decreased significantly until 2 day storage and decreased a little after 2 days. There is no differences in the change of vitamin C content among the packaging materials. In color measurement, lightness was the highest in WC 30 and in sensory evaluation, all characteristics also had the highest scores in WC30. In conclusion, better quality of straberries was shown in WC30 than in CWC and CO during storage.

• 한국결정성장학회지
• /
• 제16권6호
• /
• pp.260-266
• /
• 2006

화학적 방법에 의해 액상에서 실버가 잘 분산된 Ag coated silica를 제조하고 이를 평가하였다. Ag coated silica를 제조하기 위한 치적조건은 알카리 용액에서 반응온도 $100^{\circ}C$, 반응시간 2시간, 실버 코팅양은 5 wt%였다. 제조된 Ag coated silica는 실버가 응집되지 않은 일정한 크기의 단분산 실버가 실리카 표면에 균일하게 코팅되었으며, 윈적외선 방사율 $0.916{\sim}0.918$ 및 항균력 99.9%를 나타내었다.

• 한국표면공학회지
• /
• 제49권6호
• /
• pp.507-512
• /
• 2016

Expensive silver powder is used to form electrodes in most IT equipment, and recently, many attempts have been made to lower manufacturing costs by developing powders with Ag-Ni or Ag-Cu core-shell structures. This study examined the sintering behavior of Ag-Ni electrode powder with a core-shell structure for silicon solar cell with high energy efficiency. The electrode powder was found to have a surface similar to pure Ag powder, and cross-sectional analysis revealed that Ag was uniformly coated on Ni powder. Each electrode was formed by sintering in the range of $500^{\circ}C$ to $800^{\circ}C$, and the specimen sintered at $600^{\circ}C$ had the lowest sheet resistance of $5.5m{\Omega}/{\Box}$, which is about two times greater than that of pure Ag. The microstructures of electrodes formed at varying sintering temperatures were examined to determine why sheet resistance showed a minimum value at $600^{\circ}C$. The electrode formed at $600^{\circ}C$ had the best Ag connectivity, and thus provided a better path for the flow of electrons.

• 신재생에너지
• /
• 제8권1호
• /
• pp.18-23
• /
• 2012

The screen printing has been widely used to form silver electrodes in solar cell device due to their simplicity of process. However, the wavy and irregular surface which is believed to be originated from a screen mask mesh and thixotropic characteristics of paste on screen printing process is well-known to give a negative effect on solar cell efficiency. The dispensing method that the silver paste is extruded through micro nozzle under a moderate pressure and coated on substrate can form the silver electrode without any wavy surface. In this study, we optimize the composition of silver paste and develop paste blending condition based on the thixotropic behavior of paste. The optimized paste shows a large thixotropic loop area which is related to an aspect ratio of electrode line and has the viscosity of 40 $Pa{\cdot}s$ at 40 s-1. The electrode line we finally obtainis 67.2 ${\mu}m$ in width and has an aspect ratio of 0.277.

• 공업화학
• /
• 제27권1호
• /
• pp.68-73
• /
• 2016

1-decanoic acid와 tri-n-octylphosphine을 분산 안정제로서 사용하고, $NaBH_4$를 환원제로 사용하여 화학적 환원법으로 $AgNO_3$ 수용액으로부터 페이스트용 은 나노입자를 제조하였다. 은 나노입자의 생성, 은 나노입자의 형상 및 크기를 XRD, UV-vis, TEM 및 SEM으로 조사하였다. 합성된 은 나노입자로 페이스트를 제조하여 점도를 측정하였으며, PET 막에 코팅하여 제조된 은 박막의 표면저항을 조사하였다. $NaBH_4/AgNO_3$의 몰비는 1 : 5가 최적으로 나타났고, 최적의 몰비에서 10-200 nm의 잘 분산된 구형에 가까운 은 나노입자를 얻을 수 있었다. 최적의 조건에서 얻은 은 나노입자로 PET 막에 코팅하여 제조한 은 박막의 표면저항은 $41{\mu}{\Omega}/cm^2$의 낮은 값을 나타내었다.

• 한국전기전자재료학회논문지
• /
• 제19권10호
• /
• pp.966-970
• /
• 2006

We reported on characteristics of the piezoelectric ceramic-polymer composite for the application of the thick-film speaker. The PVDF-PZT composites were fabricated to incorporate the advantages of both ceramic and polymer with various mixing ratios by 3-roll mill mixer. The composite solutions were coated by the conventional screen-printing method on ITO electrode coated PET (Polyethylene terephthalate) polymer film. After depositing the top-electrode of silver-paste, 4 kV/mm of DC field was applied at $120^{\circ}C$ for 30 min to poling the composite films. The value of $d_{33}$ (piezoelectric charge constant) was increased when the PZT weight percent was increased. The maximum value of the $d_{33}$ was 24 pC/N at 70 wt% PZT. But the $g{33}$ (piezoelectric voltage constant) showed the maximum value of $32mV{\cdot}m/N$ at 65 wt% of PZT powder. The SPL (sound pressure level) of the speaker fabricated with the 65:35 composite film was about 68 dB at 1 kHz.

• 한국재료학회지
• /
• 제25권12호
• /
• pp.683-689
• /
• 2015

In this study, the properties of Ag-coated $TiO_2$ nanoparticles were observed, while varying the molar ratio of water and $Ag^+$ for the surfactant and $TiO_2$. According to the XRD results, each nanoparticle showed a distinctive diffraction pattern. The intensity of the respective peaks and the sizes of the nanoparticles increased in the order of AT1($R_1=5$)(33.3 nm), AT2($R_1=10$)(38.1 nm), AT3($R_1=20$)(45.7 nm), AT4($R_1=40$)(48.6 nm) as well as AT5($R_2=0.2$, $R_3=0.5$)(41.4 nm), AT6($R_2=0.3$, $R_3=1$)(45.1 nm), AT7($R_2=0.5$, $R_3=1.5$)(49.3 nm), AT8($R_2=0.7$, $R_3=2$)(57.2 nm), which values were consistent with the results of the UV-Vis. spectrum. The surface resistance of the conductive pastes fabricated using the prepared Ag-coated $TiO_2$ nanoparticles exhibited a range 7.0~9.0($274{\sim}328{\mu}{\Omega}/cm^2$) times that of pure silver paste(ATP)($52{\mu}{\Omega}/cm^2$).

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part 1
• /
• pp.330-331
• /
• 2006

Fabrication of a nano-laminar ceramic composite by sintering thin ceramic plates was examined. Silver-coated glass flakes with a thickness of less than $1{\mu}m$ were consolidated by pulsed current sintering or hotpressing to obtain model composites. The samples sintered at the optimum conditions were fairly dense, and the flakes were aligned by uniaxial press. The metal coating remained on the flakes through the sintering process, and became an interface layer between the flakes. No crack propagation through the transverse direction of the lamellar was observed in the indentation test. The possibilities of high resistance against crack propagation was suggested.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 하계학술대회 논문집 Vol.7
• /
• pp.40-41
• /
• 2006

In this work, we developed the 0-3 type piezoelectric composite to incorporate the advantages of both ceramic and polymer. The PVDF-PZT composites were fabricated with various mixing ratio by 3-roll mi11 mixer. The composite solutions were coated on ITO bottom-electrode deposited on PET (polyethylene terephthalate) polymer film by the conventional screen-printing method. After depositing the top-electrode of silver-paste, 4kV/mm of DC field was applied at $120^{\circ}C$ for 30min to poling the 0-3 composite film. The value of $d_{33}$ was increased as the PZT weight percent was increases. But the $g_{33}$ value showed the maximum at 65 wt% of PZT powder.

• 한국결정성장학회지
• /
• 제25권1호
• /
• pp.35-38
• /
• 2015

LED는 소비전력 절감, 사용수명 증가, 발광 파장 변화를 통한 다변적 적용이 가능하여 에너지 효율 증대의 대안으로 각광받고 있으며, 조명뿐만 아니라 디스플레이 백라이트, 차량용 헤드라이트 등 다양한 분야에 적용되고 있다. 현재 백색 LED를 구현하는 데에는 청색 LED와 황색 형광체를 혼합하는 방식이 주로 활용되며, 황색 형광체로는 YAG : $Ce^{3+}$가 많이 이용된다. 기존에는 형광체를 epoxy resin과 혼합하여 LED chip 위에 도포하여 경화시키는 패키징 방식을 주로 사용하였다. 하지만 페이스트 기반 패키징 방식은 열에 의한 형광체의 특성 저하와 효율 감소 문제를 일으킨다. 이러한 문제를 해결하기 위해 형광체 플레이트를 이용한 remote 방식이 이용되고 있지만, 플레이트 내부 전반사로 인한 광 효율 손실 또한 해결해야 할 문제이다. 본 연구에서는 플레이트 측면을 Ag로 코팅함으로써 플레이트 내부의 전반사에 의한 광 효율 손실을 해결하고자 하였다.