• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.30 no.10
• /
• pp.609-614
• /
• 2017

The proposed stretchable transparent electrodes based on silver nanowires (AgNWs) were prepared on a polyurethane (PU) substrate. In order toavoid the surface roughness caused by the silver nanowires, a titanium oxide ($TiO_2$) buffer layer was addedby coating and heating the organometallic sol-gel solution. The fabricated stretchable electrodes showedan electrical sheet resistance of $24{\Omega}sq^{-1}$, 78% transmittance at 550 nm, and an average surface roughness below 5 nm. Furthermore, the AgNW-based electrode maintained its initial electrical resistance under 130% strain testing conditions, without the assistance of additional conductive polymer layers. In this paper, the critical role of the $TiO_2$ buffer layer between the AgNW network and the PU substrate has been discussed.

• Bulletin of the Korean Chemical Society
• /
• v.25 no.12
• /
• pp.1779-1783
• /
• 2004

In the present study, we carried out comparative research on the anthraquinones Raman spectrum and on the anthraquinones derivative 1,4-diamino-anthraquinone focusing on change in its intermediate in terms of pH and change in the substituent. WE use the SERS method and employ a silver sol prepared by Creighton et al.'s method. From the analysis of the UV spectrum of the mixture solution of 1,4-diamino-anthraquinone and silver sol, we could see that the 1,4-diamino-anthraquinone physically adsorbs silver sol. In terms of the adsorbing orientation, the adsorption of the nitrogen atom in the amino group is perpendicular to the surface of silver sol according to the surface selection rule. From the structure of the 1,4-diamino-anthraquinone intermediate according to the change of pH, we could see that the C=O bond is strengthened in the acidic state and weakened in the neutral and the alkaline state because of the resonance effect of the amines.

• Restorative Dentistry and Endodontics
• /
• v.23 no.1
• /
• pp.288-295
• /
• 1998

The microleakage of direct-access Class 2 restorations was evaluated. Cavities were prepared at mesial and distal proximal enamel surfaces of 20 extracted human molars through buccal window. Prepared cavities were filled with Ketac-Fil, Ketac-Silver, and Fuji II LC, following manufacturer's instructions. 4 specimens of each restorations were made through sectioning 1/4 of bucco-lingual length mesio-distally after thermocycling between $5^{\circ}C$ and $60^{\circ}C$ and imerging 0.5% basic-fuchsin dye solution. Leakage at both occlusal and gingival margin of each specimen was scored 0 to 3 with stereomicroscope. The results were as follows: 1. At occlusal margin, leakage in Ketac-Fil group was more than Ketac-Silver and Fuji II LC group (ANOVA p<0.05) and there was no significant difference between Ketac-Silver and Fuji II LC group(p>0.05), and at gingival margin, there was no significant difference amang materials (p>0.05). 2. Occlusal margin leaked more than gingival margin in Ketac-Silver and Fuji II LC group (t-test p<0.05). 3. Leakage was different according to bucco-lingual location in Ketac-Fil and Fuji II LC group, and lingaul specimen exhibited more leakage(ANOVA p<0.05).

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.19 no.3
• /
• pp.323-330
• /
• 2021

Silver tellurite glasses with melting temperature of approximately 700℃ were developed to immobilize ¹²⁹I wastes. Long-term dissolution tests in 0.1 M acetic acid and disposability assessment were conducted to evaluate sustainability of the glasses. Leaching rate of Te, Bi and I from the glasses decreased for up to 16 d, then remained stable afterwards. On the contrary, tens to tens of thousands of times more of Ag was leached in comparison to the other elements; additionally, Ag leached continuously for all 128 d of the test owing to the exchange of Ag⁺ and H⁺ ions between the glasses and solution. The I leached much lower than those of other elements even though it leached ~10 times more in 0.1 M acetic acid than in deionized water. Some TeO₄ units in the glass network were transformed to TeO₃ by ion exchange and hydrolysis. These silver tellurite glasses met all waste acceptance criteria for disposal in Korea.

• The Korean Journal of Emergency Medical Services
• /
• v.11 no.3
• /
• pp.191-204
• /
• 2007

This study analyzes use and operation of silver ambulance with 110 patients who had used silver ambulance in Gwangju and Jeonnam regions from June of 2006 to June of 2007 and 53 paramedics who are involved directly in ambulance operation and the results of this analysis are as follows. 1. Users' health conditions, 69.1% of users answered as bad and 67.3% suffered from chronic diseases over 3 months and it was found that they used silver ambulance due to their bad health conditions. 2. Cronbach's alpha was 0.630 and family function index was generally reliable and solution was high as 1.60, but total points were low as 7.11 and it was considered that they had family troubles. 3. On the question of ambulance use, 44.5% answered they used it because it is free, 53.6% used it for appointed medical examination and treatment and 18.1% used it for emergency. 4. Degrees of satisfaction with ambulance and paramedics were 95.4% and 76.4% respectively and 80.0% of ambulance users answered ambulance arrived quickly within 15 min. 5. Correlation($x^2 $) between family or relative's residence and frequency of visits was 86.367 and its significance probability was 0.00 and it was found that it was significant in the level of 0.1%, but correlation($x^2 $) between visitors other than family or relatives and frequency of visits was 14.768 and its significance probability was 0.25 and it was found that it was not significant in the level of 5%. 6. Correlation($x^2 $) between transfer operation speed and mobilization time was found that it was not significant in the level of 5%. Correlation($x^2 $) between their own health condition purpose of ambulance use was 13.802 an 5.696 and its significance probability was 0.93 and it was found that it was not significant in the level of 1%, and it was considered because paramedics carried patients with safe operation.

• Bulletin of the Korean Chemical Society
• /
• v.27 no.7
• /
• pp.1005-1008
• /
• 2006

The reaction of $AgClO_{4}$ with acyclic potential tridentate N,N,N',N',N''-pentamethyldiethylenetriamine (pmdeta) has given colorless crystals suitable for X-ray crystallography. The crystal structure ($P2_{1}$/n, a = 14.413(1) $\AA$, b = 25.270(2) $\AA$, c = 16.130(1) $\AA$, b = $103.012(1){^{\circ}}$, V = 5723.7(8) A$\AA^{3}$, Z = 4, R = 0.0349) has been solved and refined. Three silver(I) ions connect four pmdeta ligands to produce discrete complex of $[Ag_3(pmdeta)_4](ClO_4)_3$. A pmdeta ligand is bridged to three silver(I) ions, and three other pmdeta ligands are chelated to each silver(I) center in a tridentate mode. Thus, the product is a rare tri-nuclear silver(I) complex with two different chemical environments. $^{13}C$ NMR and $MAS\;^{13}$C NMR indicate that the tri-nuclear silver(I) complex is not rigid in solution. The contact angles and thermal analyses of the complex are measured and discussed.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.24 no.3
• /
• pp.15-21
• /
• 2016

This experiment was conducted to test desorption and recycling characteristics for silver ion adsorbed into waste coffee grounds by using various desorbing agents such as nitric acid, ethylene diamine triacetic acid (EDTA) and nitrilo triacetic acid (NTA). It is appeared that the highest desorption efficiency for silver ions was obtained as about 97.8 % by 1.0 M of nitric acid solution. Also, in the case of less than 1.0 of the ratio of solid and liquid (S/L) (g/L), silver ions adsorbed onto coffee grounds was desorbed as about 98~100 %, and most of desorption process was completed within 60min. In addition, adsorption capacity of reused waste coffee grounds for silver ions was highly maintained as about 43.9 mg/g until the $2^{nd}$ cycle, as compared with the adsorption capacity with 45.9 mg/g of the adsorption capacity for virgin waste coffee grounds.

• Archives of Plastic Surgery
• /
• v.35 no.4
• /
• pp.407-412
• /
• 2008

Purpose: Hydrofluoric acid(HF) is one of the most dangerous mineral acids with the dissociated fluoride ions. The initial corrosive burn is caused by free hydrogen ion, and the second and more severe burn is caused by penetration of fluoride ions into subcutaneous tissues. Silver is a cation producing dressing, an effective antimicrobial agent, but older silver-containing formulations are rapidly inactivated by wound environment, requiring frequent replenishment. But, $Acticoat^{(R)}$ is a relatively new form of silver dressing which helps avoid the problems of earlier agents. The aim of this study is to evaluate effects of $Acticoat^{(R)}$, silver-containing dressing on the treatment for HF injury wound. Methods: From september 2006 to september 2007, the study was carried out with 10 patients who had HF partial thickness burns. $Acticoat^{(R)}$ dressing and 10% calcium gluconate wet gauze dressings in 10 cases. As a principle, in the emergency treatment, partial or complete removal of the nail and early bullectomy along with copious washing with normal saline was done, depending on the degree of HF invasion of the wound. Wound was dressed with $Acticoat^{(R)}$ and 10% calcium gluconate solution. The effect of dressing was investgated by serial bacterial culture and wound exudates assessment. Results: We therefore reviewed 10 cases of HF-induced chemical burns and treatment principle. The 10 cases who came to the hospital nearly immediately after the injury healed completely without sequelae. Conclusion: As the industrial sector develops, the use of HF is increasing more and more, leading to increased incidences of HF-induced chemical burns. The education of patients regarding this subject should be empathized accordingly. In conclusion, $Acticoat^{(R)}$ dressing is a better choice for HF partial thickness burn injuries because of shorter healing time, less pain and more comfortable dressing.

• Applied Chemistry for Engineering
• /
• v.7 no.4
• /
• pp.735-742
• /
• 1996

Polymeric matrices were prepared with dextran and silver sulfadiazine by adding glycerine as a plasticiser. Namely, the release rate of the drug from the polymeric matrix formulations in dissolved phases was determined in a phosphate buffer solution. The results were as follows : The drug release time was delayed as drug loading contents increased, whereas it decreased as the glycerine concentration increased. The drug release time was not changed with varying the molecular weight of the dextran. The apparent release rate constant (k) increased as the composition of silver sulfadiazine and glycerine was increased. But the apparent release rate constant (k) was not changed with increasing molecular weight of the dextran.

• Applied Chemistry for Engineering
• /
• v.28 no.5
• /
• pp.587-592
• /
• 2017

Uniform and optimum sized silver nanoplates were synthesized through the liquid phase reduction method by using silver nitrate solution as a starting chemical, dimethylformmide (DMF) as a reducing solvent, and polyvinylpyrrolidone (PVP) as reducing and surfactant agents. Synthesized and also film samples were characterized by using SEM, TEM, UV-Vis-NIR spectroscopy, particle size analyzer (PSA), and XRD. Triangle nanoplates with the size of 100~200 nm were found from the sample synthesized at $70^{\circ}C$ for 72 h using silver nitrate, DMF and 26 wt% PVP. The sample could reflect near-infrared light because it showed the maximum absorbing peak at about 1,000 nm. When the content or particle size of silver nanoplates increased in coating solutions, the transmittance decreased and the reflectance increased in film samples.