• Journal of The Korean Society of Agricultural Engineers
• /
• v.54 no.6
• /
• pp.77-87
• /
• 2012

Recently, Load and Resistance Factor Design (LRFD) based on reliability analysis has become a global trend for economical and rational design. In order to implement the LRFD, quantification of uncertainty for load and resistance should be done. The reliability of result relies on input variable, and therefore, it is important to obtain exact uncertainty properties of load and resistance. Since soil stress is the main reason causing the settlement or deformation of ground and load on the underground structure, it is essential to clarify the uncertainty of soil stress distribution for accurately predict the uncertainty of load in LRFD. In this study, laboratory model test on silty sand bed under probabilistic load is performed to observe propagation of upper load uncertainty. The results show that the coefficient of variation (COV) of soil stress are varied depending on location due to non-linear relationship between upper load increment and soil pressure increment. In addition, when the load uncertainty is transmitted through ground, COV is decreased by damping effect.

• Journal of the Korean Geotechnical Society
• /
• v.35 no.11
• /
• pp.97-110
• /
• 2019

Piles that support offshore wind turbine structures are dominantly subjected to cyclic lateral loads of wind, waves, and tidal forces. For a successful design, it is imperative to investigate the behavior of the cyclic laterally loaded piles; the p-y curve method, in which the pile and soil are characterized as an elastic beam and nonlinear springs, respectively, has been typically utilized. In this study, model pile tests were performed in a 1 g gravitational field so as to investigate the p-y behaviors of cyclic laterally loaded piles installed in saturated dense silty sand. Test results showed that cyclic lateral loads gradually reduced the overall stiffness of the p-y curves (initial stiffness and ultimate soil reaction). This is because the cyclic lateral loads disturbed the surrounding soil, which led to the decrement of the soil resistance. The decrement effects of the overall stiffness of the p-y curves became more apparent as the magnitude of cyclic lateral load increased and approached the soil surface. From the test results, the cyclic p-y curve was developed using a p-y backbone curve method. Pseudo-static analysis was also performed with the developed cyclic p-y curve, confirming that it was able to properly predict the behaviors of cyclic laterally loaded pile installed in saturated dense silty sand.

• Korean Journal of Soil Science and Fertilizer
• /
• v.4 no.2
• /
• pp.187-192
• /
• 1971

This paper deals mainly with the genesis and classification of the Jeonnam series. These soils have brown to dark brown silt loam and silty clay loam A horizon(strong brown or reddish brown where eroded). Argillic B horizons are dominantly red or yellowish red silty clay loam to silty clay with moderately developed subangular blocky structure and with thin clay cutans on the ped faces. The C horizons are strongly and very deeply weathered strong brown, yellowish brown, pale brown and reddish yellow silty clay loam and sandy loam granitic saprolite. Content of clay increases with depth to a maximum between 100cm. Percolating water seems to be responsible for transportation and oriented deposition of clay. Chemically, soil reaction is strongly acid to medium acid throughout the profile. The content of organic matter is 1 to 2 percent, and decreases regularly with depth. Base saturation is low, based on amount of extractable cations. Characterisltically the Jeonnam series are similar to Red-Yellow Podzolic soils of the United States and are similar to Red-Yellow soils of the Japan. In the writer's opinion the Jeonnam soils are classified as Red Yellow soils. According to USDA 7th approximation, this soil can be classified as Typic Hapludults and in the FAO/UNESCO World Soil Map as Helvic Acrisols.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.48 no.7
• /
• pp.35-43
• /
• 2006

This study was carried out to investigate the liquefaction behaviour and predict deviator stress with matric suction, of unsaturated silty sand. The unsaturated soil tests were conducted using a modified triaxial cell and specimens were prepared using the moisture tamping method. The axis translation technique was used to create the desired matric suctions in the specimen. Undrained triaxial compression tests were carried out at matric suction of 0, 2, 5, 10 and 25 kPa. The specimens were sheared to axial strains of about 20% to obtain steady state conditions. The results showed that liquefaction of silty sand only occurs at matric suction of 0 kPa and 2 kPa. The results also show that at matric suctions of 5, 10 and 25 kPa, the resistance to liquefaction increases. As the suction increases, the undrained effective stress path approached the drained stress path. Also, the predicted and measured maximum deviator stress for unsaturated soils using the effective stress concept showed good agreement as matric suction increases. The deviator stress increase is nonlinear as matric suction increases.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2006.03a
• /
• pp.322-329
• /
• 2006

On the way of construction in harbor area, scourin problems took place slowly failure of embankment in the beginning of construction in sites. For studying on the scouring properties during revetment construction in silty sand soil layers, this paper is carried out on lessons of case studies of numerical seepage analysis, scouring countermeasures in dredged landfill area.

• Korean Journal of Soil Science and Fertilizer
• /
• v.42 no.spc
• /
• pp.14-19
• /
• 2009

To obtain the basic data on reclaimed tideland soils, 90 soil samples were collected from 9 tideland reclamation project areas in Korea. The soils consisted of clay (2.0 to 35.0 percents), silt (2.0 to 80.0 percents), and sand (8.0 to 95.0 percents), and were dominantly classified sandy loam and silty loam. The soils had pH of 4.5 to 9.1, organic matter of 0.50 to $19.20g\;kg^{-1}$, total nitrogen of 4 to $1,159mg\;kg^{-1}$, and avaliable phosphorus (as $P2_O_5$) of 3.5 to $147.7mg\;kg^{-1}$. The electrical conductivity in soil saturation-paste extracts (ECe) ranged between $0.62dS\;m^{-1}$ and $31.60dS\;m^{-1}$ and the concentrations of sodium and magnesium ions were higher than those of potassium and calcium ions. The magnitude of the ECe was as low as that of normal level in Nam-Po, Pu-Sa, and Kye-Hwa reclamation project areas having sandy loam texture, but was as high as that of normal level saline-sodic level in Nam-Yang and So-Po reclamation project areas having silty loam texture even though the soils were cultivated more than 10 years as a paddy. Some part of Saemangeum area was surveyed and soil textures were various; some were silt loam and some were sandy loam. The ECe values were very high in topsoil and subsoil.

• Journal of the Korean GEO-environmental Society
• /
• v.24 no.11
• /
• pp.41-49
• /
• 2023

In this study, we analyzed the settlement characteristics of rockfill embankments mixed with soil by confirming the physical properties of soil materials mixed with silty materials and analyzing the compression characteristics of gravel materials according to the mixing ratio of soil materials. For this, we mixed silty materials into sandy soil to analyze the compression characteristics of soil materials, and we constructed a foundation by mixing various ratios of soil into rockfill materials with a particle distribution similar to that of river gravel, and conducted a one-dimensional compression experiment using a medium-sized chamber. As a result of the experiment, in the case of mixed soil materials, the Transition Fine Content (TFC) appeared in the range of 21~26% depending on the load condition, and in the case of rockfill materials mixed with soil, as the void filling ratio of soil in gravel samples increases, both total compression and creep compression decreases, but after a 50% mixing ratio, the settlement of amount increases again.

• Geomechanics and Engineering
• /
• v.36 no.2
• /
• pp.145-156
• /
• 2024

The mechanical properties of the concrete-frozen soil interface play a significant role in the stability and service performance of construction projects in cold regions. Current research mainly focuses on the precast concrete-frozen soil interface, with limited consideration for the more realistic cast-in-place concrete-frozen soil interface. The two construction methods result in completely different contact surface morphologies and exhibit significant differences in mechanical properties. Therefore, this study selects silty clay as the research object and conducts direct shear tests on the concrete-frozen soil interface under conditions of initial water content ranging from 12% to 24%, normal stress from 50 kPa to 300 kPa, and freezing temperature of -3℃. The results indicate that (1) both interface shear stress-displacement curves can be divided into three stages: rapid growth of shear stress, softening of shear stress after peak, and residual stability; (2) the peak strength of both interfaces increases initially and then decreases with an increase in water content, while residual strength is relatively less affected by water content; (3) peak strength and residual strength are linearly positively correlated with normal stress, and the strength of ice bonding is less affected by normal stress; (4) the mechanical properties of the cast-in-place concrete-frozen soil interface are significantly better than those of the precast concrete-frozen soil interface. However, when the water content is high, the former's mechanical performance deteriorates much more than the latter, leading to severe strength loss. Therefore, in practical engineering, cast-in-place concrete construction is preferred in cases of higher negative temperatures and lower water content, while precast concrete construction is considered in cases of lower negative temperatures and higher water content. This study provides reference for the construction of frozen soil-structure interface in cold regions and basic data support for improving the stability and service performance of cold region engineering.

• Geomechanics and Engineering
• /
• v.31 no.2
• /
• pp.167-181
• /
• 2022

Soil liquefaction has been one of the most important concerns in geotechnical earthquake engineering in recent years, due to its damages to structures and its destructive effects. The cyclic liquefaction of silty sands, in particular, remains of great interest for both research and application. Although many factors are known that affect the liquefaction resistance of sands, the effect of fine grain content is perhaps one of the most studied and still controversial. In this study, 48 deformation-controlled cyclic simple shear tests were performed on BS and CS silt samples mixed with 5%, 15% and 30% by weight of Krk085, Krk042 and Krk025 sands in constant-volume conditions to determine the liquefaction potential of silty sands. The tests were carried out at 30% and 50% relative density and under 100 kPa effective stress. The results revealed that the liquefaction potential of silty sand increases with increasing average particle size ratio (D_50sand / d_50silt) of the mixture for a fixed silt content. Furthermore, for identical base sand, the liquefaction potentials of coarse grained sands increase with increasing silt content, while the respective potentials of fine grained sands generally decrease. However, this situation may vary depending on the silt grain structure and is affected by the nature of the fine grains. In addition, the variation of the void ratio interval was shown to provide a good intuition in determining the liquefaction potentials of silty sands, while the intergranular void ratio alone does not constitute a criterion for determining the liquefaction potentials of silty sands.

• Korean Journal of Soil Science and Fertilizer
• /
• v.28 no.4
• /
• pp.340-349
• /
• 1995

Effects of the zeolite particle size on the soil chemical properties and on rice growth was investigated on the pot with the loamy sand (Sadu series) and silty clay loam(Paju series) soils. All the zeolite treatments brought the increase of unhulled grain yield on the both loamy sand and silty clay loam soils. Unhulled grain yield increased with increasing the amount of zeolite applied and with decreasing the amount of particle size of zeolite applied on both soils. Unhulled grain yield increased significantly by 11.1% (22.79g/head) with 2ton/10a of smaller than $106{\mu}m$ size zeolite on the loamy sand soil and on the silty clay loam soil, yield increased by 9.3% (24.98g/head) with 1.5ton/10a of smaller than $106{\mu}m$ size zeolite. CEC, pH and contents of exchangeable cations of the soil after experiment were raised by increasing the amount of zeolite and also by decreasing the particle size of zeolite at both soil. At the heading stage, the zeolite treatments improved the growth of rice plant compared to control. The nutrient contents(T-N, Ca, Mg, K, Na), except phosphorus, in the rice plant grown on the zeolite treated soils were higher than control plot.