• Korean Journal of Soil Science and Fertilizer
• /
• v.25 no.4
• /
• pp.342-356
• /
• 1992

Kinetic studies using stirred-flow methods were conducted with the Luisiana soil at three pH levels(pH 5, 6.5, and 8) and three temperature levels(10, 25, and $40^{\circ}C$) to explore effects on the rate of silica retention and release and to find out reaction mechanisms. In this study the maximum silica retention could not be obtained for long enough experimental time. The silica sorption isorption was C type fitted well to Freundlich equation. The pH of the soil suspension increased by the silica release process at low pH treatments(pH 5 and 6.5), while decreased at high pH treatment(pH 8). From the above findings It can be deduced that the mechanism of silica retention is a multilayer forming process to change the ligand form depending on pH condition. In the proposed mechanism the sorbed silica provide new binding sites for additional sorption of silica, while the activation energy for the formation of subsequent layers increases correspondingly. The silica retention and release process were well described by first-order and parabolic diffusion equation. However, clear interpretation for silica sorption mechanism using these equations could not be made. The validity of the fraction term (Fa and Fd) included in first-order and parabolic diffusion equation requires further examinations because the temperature effect on apparent rate constant shows no constant trends among temperature treatments, while there was a good trend in Elovich and modified Freundlich equation where the fraction term was not included.

• Archives of Pharmacal Research
• /
• v.21 no.4
• /
• pp.436-439
• /
• 1998

In order to find out anti-platelet activating factor (PAF) from natural resources, Korean medicinal plants used for the treatments of peripheral circulation disorders were tested for their possible protective effects on PAF-induced anaphylactic shock. From the above screening, the methanol extract of Gentiana scabra showed a potent antagonistic activity against PAF. Water suspension of the extract was partitioned with $CH_2$$CI_2$ and EtOAc, successively. The EtOAc fraction which showed the highest activity was chromatographed on silica gel to yield 6 fractions. From the fraction which showed higher PAF-antagonistic activity than the other fractions, compound 1 was isolated by recrystallization. On the basis of spectral data, compound 1 was identified as 2-hydroxy-3-methoxybenzoic acid glucose ester. The compound prevented the mice from the PAF-induced death at a dose of 300 $\mu\textrm{g}$/mouse.

• Korean Journal of Metals and Materials
• /
• v.48 no.8
• /
• pp.730-740
• /
• 2010

Aluminum, magnesium, titanium and high Mn steel are difficult to use in electron backscatter diffraction (EBSD) sample preparation due to the formation of an oxidation layer under conventional polishing. Alcohol-based polishing with colloidal silica suspension was introduced for these delicate samples. A hard particle-embedded sample was analyzed successfully using mechanical polishing. Ion-milling was effective in removing oxidized, deformed and transformed layers after mechanical polishing and was able to reduce artifacts significantly. The microstructure of a cross-section of a thin copper film was evaluated by attachment of a dummy to the film for mechanical polishing.

• Tuberculosis and Respiratory Diseases
• /
• v.41 no.5
• /
• pp.513-520
• /
• 1994

Background: The pathogenesis of silicosis has been focused on the interaction between alveolar macrophages and silica particle. Although fibrosis in silicosis has been studied extensively, the mechanism is still not fully understood. There is increasing evidence that monokines and arachidonic acid metabolites macrophage are involved in pathogenesis of silicosis. Recently, it was reported that prostaglandin E2 produced from macrophage counteracts the stimulatory effects of other monokines on fibroblast proliferation or collagen production. Until now, it was remained uncertain by which mechanism silica particle may activate alveolar macrophage to an enhanced release of prostaglandin E2. Methods: In order to investigate the relationship between the activity of alveolar macrophage and the production of $PGE_2$ from activated alveolar macrophage, the authors measured hydrogen peroxide and $PGE_2$ from alveolar macrophages activated by silica in vitro and from alveolar macrophages in the silicotic nodules from rat. Experimental silicosis was induced by intratracheal infusion of silica($SiO_2$) suspended in saline(50 mg/ml) in Sprague-Dawley rats. Results: produced by 1) The silicotic nodules with fibrosis were seen from the sections of rat lung at 60 days after intratracheal injection with 50 mg aqueous suspension of silica(Fig. 1). 2) In vitro, silica caused the dose dependent increase of hydrogen peroxide(p<0.05, Fig. 2A) and $PGE_2$(p>0.05, Fig. 2B) release from alveolar macrophages. Alveolar macrophages from rat with silicotic nodules released more hydrogen peroxide and $PGE_2$ than those of control group(p<0.05, Fig. 3). Conclusion: These results suggest that silica particle could activate macrophage directly and enhanced the release of $PGE_2$ and hydrogen peroxide from the alveolar macrophage.

• Korean Journal of Environmental Agriculture
• /
• v.15 no.1
• /
• pp.37-45
• /
• 1996

Abstracts From the previous metabolic study of Pentachlorophenol(PCP), PCP was found to be exclusively transformed into ${\beta}-glucose$ conjugates of PCP in soybean and rice cell suspension cultures. In order to gather structural information of of the glucose conjugate, their aglycons and glycon have been analyzed by GC and GC/MS respectively, after thorough purification by chromatographic techniques. The glucose conjugates were effectively purified through a 1-butanol extraction followed by Silica gel TLC, Sephadex column chromatography and HPLC. Aglycons of the metabolites were identified as PCP, isomeric mixture of tetrachlorophenol, and tetrachlorocatechol and glycon were identified as glucose, suggesting that there are at least three kinds of glucose conjugates with different phenolic moieties. Under controlled conditions, the glucose conjugates were separated into three HPLC peaks which released respective aglycon upon a hydrolytic treatment. These results give valuable information on the structure of the glucose conjugates such that some PCP-driven chlorophenols, in addition to PCP, are also conjugated with glucose.

• Journal of Microbiology and Biotechnology
• /
• v.10 no.4
• /
• pp.514-517
• /
• 2000

Abstracts Six shikonin metabolites were obtained from human intestinal bacteria, Bacteriodes fragilis subsp. thetaotus. following biotransformation. The transformation of shikonin (1) was performed anaerobically for 3 day at $37^{\circ}C$ in thc bacterial suspension of B. Fagilis which was cultured overnight in GAM broth. The incubation mixture \vas extracted with EtGAc Lo give a dark-brown residue. The residue was apphed to a silica gel column, which was eluted successively with hexane (Fr. A), $CHCl_3$ (Fr. B), and $CHCl_3$:MeOH (9:I) (Fr. C). Six metabolites. Fr.A (2 and 3), Fr. B (6 and 7), and Fr. C (4 and 5) were isolated by repeated silica gel column chromatography, preparatlVe TLC, followed by Sephadex LH-20. In vitro cytotoxicities were tested against human tumor cell lines; PC-3 (prostate), ACHN (renal), A549 (lung), SW620 (colon), KS62 (leukemia), and Du145 (prostate). The shikonin metabolites 2. 4, 5, and 6 showed weaker cytotoxicity than the parenL shikonin (1). whereas shikonin monomenc metabolite 3 ($ED_{50}{\;}O.44-{\;}1.22{\;}\mu\textrm{g}/ml$) and dimeric metabolite 7 ($ED_{50}{\;}O.48-{\;}2.35{\;}\mu\textrm{g}/ml$) exhibited stronger activities compared with adriamycin, which was used as the positive control.ontrol.

• Applied Chemistry for Engineering
• /
• v.18 no.4
• /
• pp.386-390
• /
• 2007

In this study, polyurethane prepolymers were synthesized from polycaprolactonediol (PCDs. M.W. 530, 830, 1000, 1250, and 2000) and polycaprolactonetriol (PCTs. M.W. 300 and 900), and hexamethylenediisocyanate (HMDI). Polyurethane beads was prepared from the different prepolymers by a two-step suspension polymerization. The particle size of polyurethane beads was investigated by particle size analyzer. The beads were $10{\sim}30{\mu}m$ in size. The structure of beads was confirmed by FT-IR spectrometer. Their thermal properties were analyzed by TGA. Glass transition temperatures ($T_g$) of the beads were in the range of $-23{\sim}-53^{\circ}C$ and decreased with the increase of the PCD molecular weight. In order to prevention the cohesion of beads, the beads were coated with tetraethoxysilane (TEOS).

• Korean Chemical Engineering Research
• /
• v.40 no.6
• /
• pp.735-740
• /
• 2002

In order to improve the anti-fogging property of polymer films, organic-inorganic hybrid coating solutions which have good hydrophilic property and transmission in the range of visible light were synthesized by the sol-gel method. The coating solutions were prepared by adding glycidoxypropyl trimethoxysilane(GPS) to a colloidal silica(15 nm) suspension(Ludox). GPS as silane coupling agent forms strong bonds to the colloidal silica and surrounding polymer matrix and links two different materials together. Solutions prepared by addition of GPS at the acidic condition resulted in coatings that were less prone to cracking, while those at the basic condition caused coatings with more cracking. These resulted in better hydrophilic property and transmission in the range of visible light for the solution prepared at the acidic condition(pH 2). Compared with coatings under acidic conditions, coatings prepared at basic conditions showed worse hydrophilic property and transmission in the range of visible light.

• Korean Journal of Materials Research
• /
• v.11 no.2
• /
• pp.137-145
• /
• 2001

A new process, gelcasting in aqueous medium, to fabricate complex-shaped ceramic core has investigated. The ceramic slurry, mixture of fused silica powder and additives such as zircon and cordierite, was electrosterically stabilizes. The slip was prepared by ball milling of polydispered ceramic suspension with monomer, dimer and dispersant. The rheological behavior of slip was evaluated by viscosity measurement. It was found that the high solid loading of polydispersed ceramic slip, which has low viscosity of 50vol%, is possible to obtained. The viscosity of the slip was significantly dependent upon the amount of polymer dispersant and the formulation of monomer and dimer. The green bodies were fabricated through casting and gelation at room temperature followed by drying at $25^{\circ}C$ for 48hrs under relative humidity of 80~85%. Crack-free green body was successfully fabricated through the above process.

• Journal of Powder Materials
• /
• v.18 no.4
• /
• pp.347-358
• /
• 2011

Two different schemes were adopted to fabricate ordered macroporous structures with face centered cubic lattice of air spheres. Monodisperse polymeric latex suspension, which was synthesized by emulsifier-free emulsion polymerization, was mixed with metal oxide ceramic nanoparticles, followed by evaporation-induced self-assembly of the mixed hetero-colloidal particles. After calcination, inverse opal was generated during burning out the organic nanospheres. Inverse opals made of silica or iron oxide were fabricated according to this procedure. Other approach, which utilizes ceramic precursors instead of nanoparticles was adopted successfully to prepare ordered macroporous structure of titania with skeleton structures as well as lithium niobate inverted structures. Similarly, two different schemes were utilized to obtain disordered macroporous structures with random arrays of macropores. Disordered macroporous structure made of indium tin oxide (ITO) was obtained by fabricating colloidal glass of polystyrene microspheres with low monodispersity and subsequent infiltration of the ITO nanoparticles followed by heat treatment at high temperature for burning out the organic microspheres. Similar random structure of titania was also fabricated by mixing polystyrene building block particles with titania nanoparticles having large particle size followed by the calcinations of the samples.