• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2005년도 봄학술 발표회 논문집(II)
• /
• pp.13-16
• /
• 2005

Nanoscale materials are of great interest due to their unique optical, electrical and magnetic properties. Due to the recent amazing achievements in nano technology, new materials were developed. But these nano technology is not apply to the construction part in spite of exellent properties of nano size material. The purpose of this study is to apply to nano technology into building materials. To develop the high performance concrete, nano cement particles is prepared by mechanical method. In the results of this study, the nano silica powder increase effect according to increase of the mixing amount, appeared that compressive strength increased but is limit in increment. For the production of high-strength concrete, nano silica powder was suitable the binder ratio from 20$\%$. And, the compressive strength of concrete are especially dependent on the curing temperature.

• 한국분말재료학회지
• /
• 제26권3호
• /
• pp.195-200
• /
• 2019

Whisker-type magnesium hydroxide sulfate hydrate ($5Mg(OH)_2{\cdot}MgSO_4{\cdot}3H_2O$, abbreviated 513 MHSH), is used in filler and flame-retardant composites based on its hydrate phase and its ability to undergo endothermic dehydration in fire conditions, respectively. In general, the length of whiskers is determined according to various synthetic conditions in a hydrothermal reaction with high temperature (${\sim}180^{\circ}C$). In this work, high-quality 513 MHSH whiskers are synthesized by controlling the concentration of the raw material in ambient conditions without high pressure. Particularly, the concentration of the starting material is closely related to the length, width, and purity of MHSH. In addition, a ceramic-coating system is adopted to enhance the mechanical properties and thermal stability of the MHSH whiskers. The physical properties of the silica-coated MHSH are characterized by an abrasion test, thermogravimetric analysis, and transmission electron microscopy.

• 한국세라믹학회지
• /
• 제34권6호
• /
• pp.591-600
• /
• 1997

Al2O3/Al composites were produced by displacement reaction method, which was carried out by immersing the sintered silica preform, which was prepared from fused silica powder, in molten aluminum. Because the molten aluminum did not penetrate into the silica preform with higher than 20% of porosity when the displacement reaction was accomplished at 100$0^{\circ}C$ for 10 hours in air atmosphere, the optimum range of sintering temperature of silica preform was from 135$0^{\circ}C$ to 140$0^{\circ}C$. The microstructure of this Al2O3/Al composites showed three-dimentionally co-continuous alumina, which provides wear resistance and high stiffness, and aluminium which acts as a toughnening phase. The grain size of the alumina in composites did not change with the particle size of the silica preform. The exact shape of the preform was retained and a net-shaped composite was produced. The representative Al2O3/Al composite prepared in this study showed 3.30mg/㎤ of bulk density, 350-430 MPa of flexural strength, 7.0 MPa.m1/2 of fracture toughness, and good machinability.

• 한국재료학회지
• /
• 제16권10호
• /
• pp.633-638
• /
• 2006

Silica powders with spherical shape and narrow size distribution were prepared by large-scale ultrasonic spray pyrolysis applying the droplet classification apparatus. On the other hand, silica powders prepared by large-scale ultrasonic spray pyrolysis without droplet classification apparatus had broad size distribution. Droplet classification apparatus used in this paper applied the principles of cyclone and dispersion plate with small holes. The droplets formed from the ultrasonic spray generator applying the droplet classification apparatus had narrow size distribution. The droplets with fine and large sizes were eliminated by droplet classification apparatus. The optimum flow rate of the carrier gas and diameter of the hole of the dispersion plate were studied to reduce the size distribution of the silica powders prepared by large-scale ultrasonic spray pyrolysis. The size distribution of the silica powders prepared by large-scale ultrasonic spray pyrolysis at the optimum preparation conditions was 0.76.

• 한국세라믹학회지
• /
• 제29권11호
• /
• pp.893-899
• /
• 1992

Composite specimens, which are composed MDF cement of HAC-PVA system were prepared by adding carbon fiber, hydrated silica and SiC powder, and we studied effect of additives on the flexural strength of the composites. All of additives is effective in the improvement of flexural strength of the composite specimens. The size of average pore diameter in the specimens which have high flexural strength property was small. Specimen mixed with hydrated silica was effective in the particle compact property. Flexural strength of carbon fiber reinforced MDF cement composites were improved because of crack deflection of carbon fiber in cementitious matrix.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 2002년도 추계학술발표회요약집
• /
• pp.385.2-385
• /
• 2002

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2012년도 춘계 학술논문 발표대회
• /
• pp.283-286
• /
• 2012

According to increase of the waste concrete occurrence, recycling has being important more and more. This study is to recycle the waste concrete powder, which is occurred in dry-process during recycling of construction waste. We have tried the waste concrete powder to apply as the replacement of the silica powder in cement extruding product. As a result, it is satisfied that the autoclave cured pannel of 50% replacement ratio of waste concrete powder staisty the level of the flexural strength of 14MPa stipulated by "KS F 4735 Extruding concrete panel" was the same thermal properties as base specimen.

• 한국세라믹학회지
• /
• 제26권2호
• /
• pp.195-200
• /
• 1989

The Silica-Carbon mixture was made with addition of carbon black in the composition which monodispersed spherical fine silica was formed by the hydrolysis of ethylsilicate, mole ratio of Carbon/Alkoxide was 3.1 and $\beta$-SiC powder was synthesized by reacting this mixture at 1,350~1,50$0^{\circ}C$ in Ar atmosphere. The results of this study are as follow : (1) The purity of synthesized $\beta$-SiC powder was above 99.98% and it was in cubic modification with lattice constant of 4.3476$\AA$. (2) The rate-controlling steps varied with the reaction temperature for the syntehsis of $\beta$-SiC in this study ; nucleation and growth of $\beta$-SiC at 1,350~1,40$0^{\circ}C$, interfacial reaction at 1,45$0^{\circ}C$ and diffusion described by Jander Equation at 1,50$0^{\circ}C$. (3) When the rate-determining step was nucleation and growth, the activation energy was about 87.8kcal/mol.

• 한국토양비료학회지
• /
• 제6권4호
• /
• pp.221-226
• /
• 1973

현(現) 비료(肥料) 공정규격(公定規格)에 보증성분(保證成分)이 미달(未達)되는 규회석(珪灰石)의 비효(肥效) 및 규회석(珪灰石)의 가용(可溶) 규산분석법(珪酸分析法)을 검토(檢討)코져, 가용규산함량(可溶珪酸含量)이 상이(相異)한 수종(數種)의 규회석(珪灰石) 및 규회석(珪灰石)과 가용성규산(可溶性珪酸)을 함유(含有)하지 않은 암석(岩石)의 혼합분말(混合粉末)을 광재(鑛滓)와 대조(對照)하여 벼에 대한 재배시험(栽培試驗)을 수행(遂行)하여 규산(珪酸)의 흡수량(吸收量)을 조사(調査)하고, 공시(供試) 규회석(珪灰石)을 수종(數種)의 완형용액(緩衡溶液)에 침출(浸出)하여 규산가용율(珪酸可溶率)과 식물체(植物體)가 흡수(吸收)한 규산함량(珪酸含量)과 상관관계(相關關係) 및 규회석(珪灰石)의 X-선회절분석(線回折分析)을 하여 다음과 같은 결과(結果)를 얻었다. 1. 가용성(可溶性) 규산함량(珪酸含量)(N/2 HCl)이 높은 규회석(珪灰石)일수록 식물체중의 규산함량 및 흡수량(吸收量)을 증가(增加)시켰다. 2. 광재(鑛滓) 처리구(處理區)의 벼 짚중(中) 규산흡수량(珪酸吸收量)은 가용성(可溶性) 규산함량(珪酸含量)이 4.1%인 규회석분말구(珪灰石粉末區)와 같이 가장 낮았다. 3. 가용성(可溶性) 규산함량(珪酸含量)이 높은 규회석(珪灰石)에 잡석(雜石)을 혼합(混合)하여 시비(施肥)하여도 수도체(水稻體)의 규산함량(珪酸含量)은 동량(同量)의 가용성규산함량(可溶性珪酸含量)을 함유(含有)한 규회석(珪灰石)과 같은 효과이었다. 4. 각종(各種) 완형용액(緩衡溶液)에 침출(浸出)된 가용규산(可溶珪酸)과 짚중(中) 규산함량(珪酸含量) 및 흡수량(吸收量)과는 고도(高度)의 유의성(有意性)이 있는 정(正)의 상관(相關)이었으며 N/2염산(鹽酸) 침출규산(浸出珪酸) 분석법(分析法)도 규회석(珪灰石)의 규산분석법(珪酸分析法)으로써 충분(充分)히 사용(使用)될 수 있는 방법(方法)이었다. 5. 규회석(珪灰石)의 X-선(線) 회절(回折)은 규회석(珪灰石)의 조성(造成)을 찾아낼 수 있으며, 결정(結晶)이 불량(不良)한 규회석(珪灰石) 일수록 가용규산함량(可溶珪酸含量)이 높았다.

• 한국자기학회지
• /
• 제3권2호
• /
• pp.108-114
• /
• 1993

자기기록매체에 적합한 실리카 피착 ${\gamma}-Fe_{2}O_{3}$ 제조에 있어서 실리카 피착의 효과와 영향에 대하여 검토하였다. 특히 ${\gamma}-Fe_{2}O_{3}$ 제조시 열처리단계에 있어서 실리카 피착의 효과와 분말의 특성과의 상관관계를 조사하는데 연구의 중점을 두었다. 수산화철 표면에 무기물질인 실리카성분을 물유리를 사용하여 피착한 시료와 피복하지않은 시료를 후속 열처리하여 ${\gamma}-Fe_{2}O_{3}$를 제조한후 이들 분말의 특성을 조사하였다. ${\gamma}-Fe_{2}O_{3}$에 피복된 실리카 피착층은 환원 시 과환원과 급속한 산화반응을 억제하는 확산장벽으로 작용하여 최종제품내에 ${\alpha}-Fe_{2}O_{3}$의 혼입을 방지하기 때문에 실리카 피복된 ${\gamma}-Fe_{2}O_{3}$는 높은 자화특성을 나타내었다. 또한 실리카 피척층은 소결 억제제로 작용하여 실리카가 피복된 시료의 경우 침상성이 우수하여 높은 보자력과 비표면적을 나타내었다.