• 제목/요약/키워드: silica compound

검색결과 430건 처리시간 0.028초

방선균 SS-4993이 분비하는 살충물질의 화학적 성상 및 작용기작 (Chemical Properties of the Insecticidal Compound Produced by an Actinomycetes, SS-4993)

  • 이은정;강경돈;황교열;김두호;이상몽;김신덕;성수일
    • 한국잠사곤충학회지
    • /
    • 제41권3호
    • /
    • pp.180-184
    • /
    • 1999
  • The insecticidal compound priduced by Streptomyces SS-4993 strain was indicated to be a relatively stable small compound by pancreatin treatment. The active compound was adsorbed on HP20 and eluted with 70% acetone. Then, the eluate was extracted with ethyl acetate. The content of the extract was determined by thin layer chromatography (Silica gel 60 F254, hexane-ethyl ether-acetic acid,80 : 20 :1). Three active bands (Rf 0.08, 0.07, 0.88) were identified by dermal application using Bombyx mori larvae. Electrophoretic analysis revealed that the injection of strain SS-4993 culture broth into B. mori larvae induce the reduction of the hemolymph proteins level. Especially, the level of apolipophorin-I was decreased drastically.

  • PDF

Schima wallichii subsp. liukiuensis의 Candida종에 대한 항균효과 및 항균물질의 분리정제 (Purification of Antimicrobial Compounds and Antimicrobial Effects of Schima wallichii subsp. liukiuensis against Candida sp.)

  • 최명석;신금;양재경;안진권;권오웅;이위영
    • KSBB Journal
    • /
    • 제16권3호
    • /
    • pp.269-273
    • /
    • 2001
  • 218종의 목본식물 자원으포부터 높은 항율력올 보인 Schima wallichii subsp. liukiuellsis로부터 항균활성물질을 추출, 정제하였다. Schim$\alpha$의 향균물질 추출에 가장 적합한 용매는 70% 에탄올이었으며, 계젤에 따른 항균활성은 차이를 보이지 않았고, 부위별로는 가을에 채취한 수피가 가장 좋았다. 조추출물을 유가용매로 정제하여 최종적으혹 buthanol 분획올 얻었고, 이를 silica gel과 sephadex LH-20 및 HPLC분석을 통 하여 흰색결정의 항균물질 Compound I을 얻었다. 항균물질은 UV, IR, MS분석 결과 aglycone으로 ${\alpha}$-sitosterol에 rhamnose, galactose, glucose가 1:1:1로 결합된 물질로 추정되었다. Compound I의 미생물에 대한 MIC는 3종의 bacteria에 L 1.25 g/L, 2종의 fungi에 5.0 g/L로 나타났으며, 효모에 대한 MIC는 0.04 g/L로 매우 높게 나타났다. Compound I은 천연 보존제, 의약품 등으로의 향후 개발이 기대된다.

  • PDF

ANALYSIS OF RADIOACTIVE IMPURITIES IN ALUMINA AND SILICA USED FOR ELECTRONIC MATERIALS

  • Lee Kil-Yong;Yoon Yoon-Yeol;Cho Soo-Young;Kim Yong-Je;Chung Yong-Sam
    • Nuclear Engineering and Technology
    • /
    • 제38권5호
    • /
    • pp.423-426
    • /
    • 2006
  • A developed neutron activation analysis(NAA) and gamma-spectrometry were applied to improve the analytical sensitivity and precision of impurities in electronic-circuit raw materials. It is well known that soft errors in high precision electronic circuits can be induced by alpha particles emitted from naturally occurring radioactive impurities such as U and Th. As electronic circuits have recently become smaller in dimension and higher in density, these alpha-particle emitting radioactive impurities must be strictly controlled. Therefore, new NAA methods have been established using a HTS(Hydraulic Transfer System) irradiation facility and a background reduction method. For eliminating or stabilizing fluctuated background caused by Rn-222 and its progeny nuclides in air, a nitrogen purging system is used. Using the developed NAA and gamma-spectrometry, ultra trace amounts of U(0.1ng/g) and Th(0.01ng/g) in an alumina ball and high purity silica used for an epoxy molding compound (EMC) could be determined.

난분해성 유기물질 제거를 위한 오존/촉매 공정의 비교에 관한 연구 (A Comparative Study of Catalytic Ozone processes for Removal of Refractory Organics)

  • 이규환;이유미;이동석
    • 산업기술연구
    • /
    • 제26권A호
    • /
    • pp.199-205
    • /
    • 2006
  • Ozone alone and catalytic ozone processes were introduced for treatment of humic acid, which is representative refractory organic compound. The treatment efficiencies of humic acid in each process were analyzed in pH variation, DOC removal, and $UV_{254}$ decrease. Mn loaded GAC catalyst was prepared by loading potassium permanganate onto the granular activated carbon surface. BCM-GAC and BCM-Silica gel catalyst were prepared by BCM. $UV_{254}$ decrease in all processes was comparatively high with efficiency over 87%. DOC removal in ozone/GAC process was the highest with 78%, and removal rates for other processes followed the order ozone/BCM-GAC(62%) > ozone/BCM-silica gel(45%) > ozone/silica gel(43%) > ozone/Mn Loaded GAC(42%) > ozone alone(37%).

  • PDF

아크 소호재의 종류 및 입도에 따른 휴즈의 차단 특성에 관한 연구 (Interrupting Characteristics of Fuses Element in Different Fillers)

  • 김인성;한동희;장문순;이세현
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 1999년도 추계학술대회 논문집 학회본부 C
    • /
    • pp.900-902
    • /
    • 1999
  • This paper deals with the interrupting characteristics of fuses element in different media of arc extinguisher. Aluminum hydro-oxide, boron nitride, silica and there size have been investigated here for their prospects as filling media in heavy current, high breaking capacity fuses. The result of these study are compared with those on silica sand at high current. This study demonstrates that silica sand is far superior filler in fuses for heavy current interrupting then the compound tested.

  • PDF

Nanofiller as Vulcanizing Aid for Styrene-Butadiene Elastomer

  • Sahoo, N.G.;Das, C.K.;Panda, A.B.;Pramanik, P.
    • Macromolecular Research
    • /
    • 제10권6호
    • /
    • pp.369-372
    • /
    • 2002
  • The use of ZnO and stearic acid is very well known in sulfenamide accelerated sulfur vulcanization of diene elastomers. Zn-ion coated nano filler has been developed and tested, in styrene-butadiene rubber (SBR) as sulfur vulcanizing activator cum reinforcing filler. In this study Zinc oxide has been replaced by the Zn-ion coated nano silica filler with an aim to study the dual role of this nanofiller in SBR. The presence of Zn-ion on the nano silica filler surface activates the sulfur vulcanization by involving Zn++ in to the sulfurating complex formed with thiazole from sulfenamide. The increase of Zn-ion, on the nanofiller, decrease the scorch safety of the elastomer compound but increase the tensile strength, state of cure and tear strength and attain maximum at its 10% level. The presence of stearic acid increases the rate of vulcanization. Replacement of stearic acid with mono-stearate, however, increases the vulcanization rate but decrease the ultimate state of cure. A mechanistic scheme involving dual function of this nanofiller has been suggested.

천년초선인장으로부터 분리한 페놀성 화합물의 생리활성 효과 (Biological Activity of Phenol Compound from a Cactus Cheonnyuncho (Opuntia humifusa) in Korea)

  • 이경석;이기영
    • 한국식품영양과학회지
    • /
    • 제39권8호
    • /
    • pp.1132-1136
    • /
    • 2010
  • 천년초는 한국에서 자생하는 손바닥선인장으로 예전부터 민간에서 약재로 사용되어져 왔다. 천년초를 70% 에탄올로 추출한 후 이를 헥산, 클로로포름, 에틸아세테이트, 부탄올, 물 층으로 순차 분획하여 항산화 활성이 우수한 에틸아세테이트 획분을 얻었다. 에틸아세테이트 획분을 가지고 TLC를 실시하여 10개의 fraction으로 분리하였고 이중 항산화 활성이 가장 우수하게 나온 3번째 fraction을 취한 후 silica gel chromatography를 사용하여 정제하였다. 총 10개의 분획을 채취한 후 항산화 활성이 우수한 4번째 분획을 채취하여 HPLC를 사용하여 정제하였다. 정제물은 EI-MS를 사용하여 분자량을 측정하였고 $^1H$-NMR과 $^{13}C$-NMR spectrum을 측정하여 검증한 결과 taxifolin으로 확인되었다. 이를 가지고 항산화 활성을 검증한 결과 $\alpha$-tocopherol, BHA와 비교하여 뒤지지 않는 효과를 보여주었고 항균 활성을 검증한 결과 그람 양성, 음성의 식중독균에 모두 benzoic acid보다 우수한 활성을 보여주었다.

산마늘(Allium victorialis)의 추출성분 (Extractives from the Allium victorials)

  • 이학주;이상극;최윤정;조현진;강하영;이성숙;최돈하
    • 한국산림과학회지
    • /
    • 제96권6호
    • /
    • pp.620-624
    • /
    • 2007
  • 산마늘(Allium victorials var. platyphyllum)을 채취하여 건조시킨 후 분쇄하여 1.5 kg을 acetone-$H_2O$ (7:3, v/v)로 추출하고 헥산, 메틸렌클로라이드, 에틸아세테이트, 부탄올 및 물 가용부로 분획하여 동결건조하였다. 에틸아세테이트 가용부를 Sephadex LH-20 및 silica gel로 충전한 칼럼에서 다양한 용출용매로 사용하여 칼럼크로마토그래피를 실시하였다. 단리된 화합물들은 박층크로마토그래피(TLC)로 확인한 후 $^1H-$, $^{13}C$-NMR, HMBC 등의 스펙트럼을 사용하여 정확한 구조를 구명하였고 El-MS로써 분자량을 측정하였다. 산마늘의 에틸아세테이트 가용부에는 astragalin (화합물 1), kaempferol (화합물 2), quercetin (회합물 3), ferulic acid (화합물 4)가 분리되었다.

보강제에 따른 EPDM의 원적외선 가교 특성 연구 (Effects of Reinforcing Fillers on Far-infrared Vulcanization Characteristics of EPDM)

  • 김정수;이진혁;정우선;배종우;박희창;강동필
    • Elastomers and Composites
    • /
    • 제44권1호
    • /
    • pp.47-54
    • /
    • 2009
  • 본 연구에서는 다양한 종류의 보강제를 혼합한 EPDM 컴파운드의 원적외선에 의한 가교 반응을 조사하였다. 보강제가 원적외선에 의한 가교 반응에 미치는 영향을 평가하기 위하여 컴파운드의 발열 온도 및 DSC 분석에 의한 가교도를 측정하였으며, 특히 원적외선에 의한 가교 특성을 비교하기 위하여 동일 조건에서 열풍에 의한 가교 반응을 조사하였다. 원적외선 가교 조건에서 카본블랙을 혼합한 EPDM 컴파운드는 입자크기가 증가함에 따라 열전도도가 증가하며 이에 따라 원적외선에 의한 가교도 역시 증가하였으나, 열풍에 의한 가교도의 변화에는 거의 영향을 주지 못하였다. 보강제 종류에 따른 원적외선 가교 특성 평가 결과, 열전도도가 높은 아세틸렌 블랙을 함유한 컴파운드의 가교도가 가장 높게 나타났으며, 열전도도가 유사한 카본블랙 및 침강실리카의 경우 상대적으로 원적외선 흡수 특성이 우수한 침강실리카 배합 컴파운드의 경우 원적외선에 의한 가교도가 높게 나타났다.

${\zeta}-Carotene$의 산화개열산물 (Oxidative Cleavage Products of ${\zeta}-Carotene$)

  • 김선재
    • 한국식품과학회지
    • /
    • 제32권5호
    • /
    • pp.985-990
    • /
    • 2000
  • ${\zeta}-Carotene$를 dichloromethane에 용해하고 dry ice 상에서 ozonolysis을 행하였다. Ozonolysis에 의해 생성된 화합물은 silica gel chromatography를 행하여 분획하고, photodiode array detector를 이용하여 ODS-HPLC로 분석하였다. Toluene에 ${\zeta}-carotene$을 용해하고 $37^{\circ}C$, 72시간 자동산화시킨 결과, 다수의 carbonyl 및 acidic화합물이 생성되었다. ${\zeta}-Carotene$의 자동산화로부터 생성된 carbonyl 화합물의 대부분은 ozonolysis에 의하여 얻어진 산화개열산물이 나타내는 HPLC상의 거동과 분광학적 특성이 서로 잘 일치하였다. 또한 ${\zeta}-carotene$의 자동산화에 의해 생성된 중앙개열 acidic 화합물은 생물활성을 나타내는 4,5-didehydrogeranyl geranyl acid 표준품과 동일한 분광학적 특성을 나타냈다. 이러한 결과는 in vitro상의 산화적 조건하에서 ${\zeta}-carotene$ 자동산화에 의해 eccentric cleavage가 생성됨을 알 수 있었다.

  • PDF