• Journal of Korea Multimedia Society
• /
• v.21 no.11
• /
• pp.1244-1253
• /
• 2018

The color of traffic light is sensitive to various illumination conditions. Especially it loses the hue information when oversaturation happens on the lighting area. This paper proposes a traffic light recognition method robust to these illumination variations. The method consists of two steps of traffic light detection and recognition. It just uses the intensity and saturation in the first step of traffic light detection. It delays the use of hue information until it reaches to the second step of recognizing the signal of traffic light. We utilized a deep learning technique in the second step. We designed a deep convolutional neural network(DCNN) which is composed of three convolutional networks and two fully connected networks. 12 video clips were used to evaluate the performance of the proposed method. Experimental results show the performance of traffic light detection reporting the precision of 93.9%, the recall of 91.6%, and the recognition accuracy of 89.4%. Considering that the maximum distance between the camera and traffic lights is 70m, the results shows that the proposed method is effective.

• Journal of the Institute of Convergence Signal Processing
• /
• v.2 no.2
• /
• pp.28-38
• /
• 2001

Traffic information can be broadly categorized into point information and spatial information. Point information can be obtained by chocking only the presence of vehicles at prespecified points(small area), whereas spatial information can be obtained by monitoring large area of traffic scene. To obtain spatial information by image processing, we need to track vehicles in the whole area of traffic scene. Image detector system based on global tracking consists of video input, vehicle detection, vehicle tracking, and traffic information measurement. For video input, conventional approaches used auto iris which is very poor in adaptation for sudden brightness change. Conventional methods for background generation do not yield good results in intersections with heave traffic and most of the early studies measure only point information. In this paper, we propose user-controlled iris method to remedy the deficiency of auto iris and design flame difference-based background generation method which performs far better in complicated intersections. We also propose measurement method for spatial traffic information such as interval volume/lime/velocity, queue length, and turning/forward traffic flow. We obtain measurement accuracy of 95%∼100% when applying above mentioned new methods.

• International Journal of Highway Engineering
• /
• v.15 no.1
• /
• pp.111-119
• /
• 2013

PURPOSES: Though the situation that the roundabouts are actively constructed, researches on the effect of the roundabouts focus mainly on the analysis of the expected effects of using only traffic simulation on the operation. Considering such problems, this study is conducted to analyze the effects of the various aspects based on field observation studies. METHODS: This study evaluated and analyzed the effects from the aspects of traffic operation, traffic safety, and traffic behavior by performing field observation studies with six roundabouts with/without signal controls on the pilot project areas for the roundabouts installed in 2010. RESULTS: Through the study results, it was found that the average travel time decreases by 14.7% and 2.4% on the signalized intersections and unsignalized intersections, respectively. The average travel speed increases by 9.7 and 5.8km/h on the roundabouts with/without signal lights. Regarding traffic safety, the speed deviation among individual vehicles decreases by approximately 18.4 to 32.7km/h, thus confirming the safety effects. As the decrease of the number of conflicts, it might be explained that car crashes and collision with pedestrians decreased by 62.2% and 66.7%. Also the result shows that the lowest point of speed in roundabouts appears near the yield line on the entry area on the roundabouts. When passing through the roundabouts, vehicles enter at a speed of 20-30km/h, which is the design speed of the circulatory lane and drive out the roundabout with a higher speed than the entry speed. CONCLUSIONS: When a roundabout is introduced at the intersections below certain traffic volume there are effects of traffic operation, traffic safety, and traffic behavior.

• Korean Management Science Review
• /
• v.16 no.1
• /
• pp.39-50
• /
• 1999

This paper proposes a new call admission control method to enhance the reverse link capacity of a cell with heavy traffic in the CDMA PCS system under the uneven traffic load between cells. Since the capacity of a cell in the CDMA system is restricted by the total interference caused by terminals in the own cell and the adjacent cells, we can enhance the capacity of a cell by reducing the interference from other cells if possible. Our power control method allows that the signal powers received in base stations with heavy traffic be larger than those received in base stations with light traffic in order to make the interference due to other cells in the cells with heavy traffic relatively small. In the previous study, it was assumed that the signal power received by each base station in the CDMA PCS system is same when the call admission control algorithm is implemented. We could show that the reverse link capacity of a cell in the CDMA PCS system can be increased about 20% under our call admission control method.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.13 no.1
• /
• pp.76-84
• /
• 2003

Now days, It is based on GIS and GPS, it can search for the shortest path and estimation of arrival time by using the internet and cell phone to driver. But, even though good car navigation system does not create which is the shortest path when there average vehicle speed is 10 -20 Km. Therefore In order to reduce vehicle waiting time and average vehicle speed, we suggest optimal green time algorithm using fuzzy adaptive control, where there are different traffic intersection length and lane. In this paper, it will be able to forecast the optimal traffic information, estimation of destination arrival time, under construction road, and dangerous road using internet.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2022.05a
• /
• pp.119-121
• /
• 2022

In this paper, we will make a model that finds optimal phase for each crossroad. When the traffic volume, traffic capacity, and the lane width of every direction is given for each crossroad, we aim to find the most efficient phase. We established an evaluation function that evaluates the efficiency of each phase using the values of the average waiting time in one direction, the average delay time, the standard deviation of the delay time, and the average delay time in each direction. The time allocation to optimize a phase pattern can be obtained by using the gradient decent method. Through this research, we hope to decrease the waiting time in transporation, thus improving the overall traffic condition in cities.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.13 no.3
• /
• pp.25-37
• /
• 2014

Recently, our local governments are conducting the introduction of tram system because it is recognized as an effective public transit that can solve a traffic jam in downtown, decreasing public transit share and environmental issues in world wide cities. We developed the Active Priority Control Strategy to efficiently operate a tram in our existing traffic signal system. This study organized the tram system for operating the Active Priority Signal Control, developed the algorithm that calculates a tram-stop dwell time in order to pass the downstream intersection without a stop. The dwell time is determined by arrival time at tram-stop, downstream signal time, and the location of a opposite tram, it can be reduced by choosing the optimal one among Signal Priority Controls. Using the VISSIM and VISVAP model, we conducted a simulation test for the city of Chang-won that it is expected to install a tram system. It showed that a developed signal control strategy is effective to prevent a tram's stop in intersections, to reduce a tram's travel time.

• International Journal of Highway Engineering
• /
• v.15 no.6
• /
• pp.41-47
• /
• 2013

PURPOSES : The purpose of this study is about noise which is generated from roads and is consist of irregular frequency variation from low frequency to various band. The existing methods of noise reduction are sound barrier that uses insulation material and absorbing material or have applied passive technology of noise reduction by devices. The total frequency band is needed to apply active noise control. METHODS : In this study applies to the field of road traffic environment, signal processing controller and various analog signal input/output, the amplifier module is based on parallel-core embedded processor designed. DSP performs the control algorithm of the road traffic noise. Noise sources in the open space performance of evaluation were applied. In this study, controller of active signal processor was designed based on the module of audio input/output and main controller of embedded process. The controller of active signal processor operates noise reduction algorithm and performance tests of noise reduction in inside and outside environment were executed. RESULTS : The signal processing controller with OMAP-L137 parallel-core processors as the center, DSP processors in the active control operations dealt with quickly. To maximize the operation speed of an object and ARM processor is external function keys and display for functions and evaluating the performance management system was designed for the purpose of the interface. Therefore the reduction of road traffic noise has established an electronic controller-based noise reduction. CONCLUSIONS : It is shown that noise reduction is effective in the case of pour tonal sound and complex tonal sound below 500Hz by appling to Fx-LMS.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.32 no.6D
• /
• pp.623-636
• /
• 2012

Roundabout is an intersection that allows vehicles to pass through the intersection by circulating the circular traffic island at the center of the intersection. In this study, a comparative analysis was conducted on roundabout at five locations in order to deduce the operational result and financial effect of roundabout and signal intersection. As for the operational result, it was found that roundabout showed improvement effect in the average delay per vehicle compared to that of signal intersection by minimum of 65.6% and maximum of 91.77%. it was found that roundabout showed financial cost-saving effect in the traffic congestion cost compared to that of signal operation by minimum of 58.59% and maximum of 81.69% per year. It can be known from these analysis results that roundabout has significant operational effects under certain amount of traffic volume by allowing vehicles to pass through the intersection in a continuous way without much waiting time and stoppage from signal control.

• International Journal of Highway Engineering
• /
• v.20 no.3
• /
• pp.85-92
• /
• 2018

PURPOSES : In this study, analyze the characteristics of IOC indicator 'threshold' which is needed when evaluating the traffic signal operation status with ESPRESSO in various grade road traffic environment of Seoul metropolitan city and derive suggested value to use in field practice. METHODS : Using the computerized database program (Postgresql), we extracted data with regional characteristics (Arterial, Collector road) and temporal characteristics (peak hour, non-peak hour). Analysis of variance and Duncan's validation were performed using statistical analysis program (SPSS) to confirm whether the extracted data contains statistical significance. RESULTS : The analysis period of the main and secondary arterial roads was confirmed to be suitable from 14 days to 60 days. For the arterial, it is suggested to use 20 km/h as the critical speed for PM peak hour and weekly non peak hour. It is suggested to use 25 km/h as the critical speed for AM peak hour and night non peak hour. As for the collector road, it is suggested to use 20 km/h as the critical speed for PM peak hour and weekly non peak hour. It is suggested to use 30 km/h as the critical speed for AM peak hour and night non peak hour. CONCLUSIONS : It is meaningful from a methodological point of view that it is possible to make a reasonable comparative analysis on the signal intersection pre-post analysis when the signal operation DB is renewed by breaking the existing traffic signal operation evaluation method.