• 한국안전학회지
• /
• 제14권3호
• /
• pp.146-154
• /
• 1999

The feasibility of using AE for monitoring mechanical failure in concrete structures has been tested. Specifically, the relationship between the fracture and the characteristics of AE signal is theoretically and experimentally investigated. The experimental results manifest that the high sensitivity of AE signal to the fracture of concrete structure makes it a good choice as sensor for monitoring concrete structure.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 제40회 하계학술대회
• /
• pp.2142_2143
• /
• 2009

Many waveform characteristics of arc signal support the detection of hazardous arc faults. The shoulder is one of main characteristics of arc signal. This paper provide a method for the detection of shoulder from series arc fault based on discrete wavelet transform. The simulation results show that the proposed method is reliable and simple.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2012년도 춘계학술대회 논문집
• /
• pp.63-64
• /
• 2012

• 한국통신학회논문지
• /
• 제39A권6호
• /
• pp.303-309
• /
• 2014

보안성을 향상시킬 수 있는 시스템인 카오스 통신 시스템은 신호의 비예측성, 비주기성, 광대역성, 구현의 용이성 등의 특징을 가지며, 초기조건에 굉장히 민감한 특징을 가진다. 이런 특징들로 인해서 카오스 통신 시스템의 보안성은 디지털 통신 시스템보다 우수하다. COOK 변조 방식은 비동기식 수신기를 사용하면서도 다른 카오스 변조 방식보다 BER 성능이 우수하게 평가된다. 하지만 COOK 변조 신호는 정보 비트의 예측이 쉽기 때문에 보안성과 신호의 안전성 측면에서는 다른 카오스 변조 방식보다 나쁘게 평가된다. 따라서 본 논문에서, 우리는 COOK 변조 방식의 보안성과 신호의 안전성을 향상시키기 위해 스크램블링 기법을 응용하여 새로운 스크램블링 COOK 변조 방식을 제안한다. 기존 COOK 변조 방식은 데이터가 1인 경우에만 카오스 신호를 발생시키기 때문에 데이터 예측이 가능하지만, 스크램블링 COOK 변조 방식은 발생된 카오스 신호가 0일 수도 있으며 1일 수도 있기 때문에 예측이 불가능하다. 따라서 스크램블링 COOK 변조 방식은 기존 COOK 변조 방식보다 전송 신호의 보안성과 안전성을 향상시킬 수 있다.

• 한국IT서비스학회지
• /
• 제16권4호
• /
• pp.223-234
• /
• 2017

The audible pedestrian signal (APS) is an add-on device which connects to the pedestrian signaling device and informs the contents and changes of the signaling by sound. It provides walking direction information of the pedestrian crossing so that the blind people can safely cross the pedestrian crossing. In an intersection where a plurality of audible pedestrian signal (APS) are installed at an intersection crosswalk, existing audible pedestrian signal (APS) operate simultaneously in the communication radius of a wireless remote controller, which may cause confusion for the blind people and the public may complain about the noise. In this paper, we developed a BLE (Bluetooth Low Energy)-based audible pedestrian signal (APS) system capable of supporting two-way communications with a smart-phone that can cross the intersection safely and improve the walking comfort and traffic safety for the blind people. The proposed method is a method in which the BLE beacon communication based audible pedestrian signal (APS) presents active service to the blind people, and the existing audible pedestrian signal (APS) is a way of requesting the passive service by the blind people with the wireless remote control by the unidirectional communication based on 358Mhz. The developed system is installed in the crossroad of Doma-dong, Seo-gu, Daejeon, and it is tested and operated by the blind people. The satisfaction evaluation and analysis of the audible pedestrian signal (APS) for the blind people have good results and are planned to be expanded in the future.

• 자동차안전학회지
• /
• 제14권3호
• /
• pp.48-59
• /
• 2022

A V2X system can be a candidate as a means to increase the stability of autonomous vehicles. In particular, in order to implement a Level 4 or higher autonomous driving system, the application of the V2X system is essential. Wireless communication technologies applicable to the V2X system include WAVE and C-V2X. Currently, the V2X service most used by autonomous driving systems is a service that provides signal phase and timing information and since real-time characteristic is a very important, verification of this service must be done. In this paper, we measured the time delay characteristics for providing signal phase and timing information using WAVE and LTE communication, and proposed a TOD-based signal phase and timing information generation method without using V2X communication system. To analyze the time delay characteristics, RTT (Round Trip Time) was measured as a result of the measurement. Average RTT using WAVE communication was 5.84ms and was 104.15ms with LTE communication. As a result of measuring the error between the signal phase and timing information generated based on TOD and the actual traffic light state, it was measured to be -0.284~3.784sec.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2009년도 추계학술대회
• /
• pp.530-533
• /
• 2009

본 연구는 DSP(Digital signal processor)상에서 영상 처리 기술을 이용한 안전모 미착용 인식 기술을 개발한다. 이는 산업 현장에 배치된 영상 입력 장치를 통해 입력된 영상을 영상 처리하고, 안전모를 미착용한 사람이 발견될 경우 감독관에게 해당 인식 결과를 전송하여 조치를 취함으로써 만약의 사고 발생시 안전모를 착용하지 아니하여 발생할 수 있는 추가적인 인명피해를 미연에 방지한다. 안전모 미착용을 인식하기 위해서는 입력된 영상에서의 오브젝트 추출, 노이즈 제거, 사람/사물 판단, 머리 영역 추출, HSV 색공간을 이용한 안전모 착용 유/무 판단 등의 과정을 거친다. 영상입력 및 영상처리는 DSP를 이용해 처리하고 알고리즘의 속도 개선을 위하여 C언어 기반의 코드를 DSP가 제공하는 고유 함수(Intrinsics)들을 이용하여 최적화 한다.

• 한국전자통신학회논문지
• /
• 제12권1호
• /
• pp.9-16
• /
• 2017

본 논문은 V2P(Vehicle to Pedestrian) 통신시스템에서 고령자의 보행 행태를 고려한 위험정보의 제공방법에 관한 연구이다. 본 연구에서는 경기도 지역의 2011년-2014년의 1219건의 노인교통사고에 대하여 도로유형(단일로, 교차로), 신호유무(무신호, 신호), 횡단보도유무(횡단보도, 무단횡단), 사고원인(무단횡단, 신호위반, 부주의사고, 기타)로 분류하여 고령자 사고의 행태를 분석하였다. 또한, 고령자의 행태변수와 차량속도변수를 검토하고, 기준치를 이용하여 상충위험정보제공에 활용하도록 하였다. 고령자의 보행속도, 안전여유값 그리고 차량의 접근속도에 따라 사고를 방지할 수 있도록 요구하는 거리를 제안한다. 본 연구의 결과물을 고령자 보행형태의 변수를 고려한 V2P 통신 및 P2V 통신 기반의 상충위험정보 제공시스템에 적용함으로써 고령자의 사고경감에 도움이 될 것으로 사료된다.

• 한국자동차공학회논문집
• /
• 제16권3호
• /
• pp.23-29
• /
• 2008

It is necessary to develope the active safety system in terms of driver's safety and convenience. In this paper, we were developed the non-contact type of safety window system operated by the initial value of feedback control such as the output signal of photo sensor. It was designed based on the control algorithm with an improved load sensitivity. Therefore, compared with the existing system, it is possible to prevent the occurrence of a mull-function. Also, it has a convenient functions of the window such as an auto up/down and closing, and has a response times better. It can be installed the various types of common vehicles that have the different movement distance and speed of window. In conclusion, the developed system may be adapted the vehicle commercially.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2006년도 추계학술대회 논문집
• /
• pp.786-790
• /
• 2006

Urban rail transit offers target performance and function because various lower part system such as rolling-stock, signal, power and trackis consisted as complex. In order to function properly an urban rail transit which is complicated system to work as safety and reliability, System must secure safety with structure, design, manufacture, install and verification and it is important to establish a safety standard follows it procedures, establish what step all it is important to operate. Safety standard of urban transit infrastructure is minimum standard necessary to secure safety of signal, power and track. Urban rail transit standard business leads to make many requirements. Recently, many types of equipment have applied to manage requirements and standards for system efficiently in part of universal, airline and car accordingly applied equipments use to manage a pursuit(Trace) between standard of system. Especially importance of management is emphasized more become more. Importance of standard management which usesa computing support tool recently in transit filed is embossed and is predicted to be more such forward. Therefore we propose the effective method of management with infrastructure system by constructed data-base system.