• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 2003년도 ISIS 2003
• /
• pp.543-546
• /
• 2003

Representation and quantification of fuzziness are required for the uncertain system modelling and controller design. Conventional results show that entropy of fuzzy sets represent the fuzziness of fuzzy sets. In this literature, the relations of fuzzy enropy, distance measure and similarity measure are discussed, and distance measure is proposed. With the help of relations of fuzzy entropy, distance measure and similarity measure, fuzzy entropy is proposed by the distance measure. Finally, proposed entropy is applied to measure the fault signal of induction machine.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2004년도 추계학술대회 논문집
• /
• pp.207-211
• /
• 2004

The performance of an inductive position sensor has approved by previous research papers. In this paper, magnetic circuit model of a ring-type multi-pole insuctive position sensor is described. The magnetic circuit model is required to design in ductive position sensor as well as draw a fault tolerance algorithm. Using the magnetic circuit theory, we derived the relationship between voltage applied and flux density in the normal air-gap. By idealizing the modulation/demodulation processes of signal processing circuit, sensor gain with respect to change of displacement is theoretically calculation using the magnetic circuit model, which validate the theoretical derivation.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.341-348
• /
• 2003

Photovoltaic systems normally use a maximum power point tracking (MPPT) technique ta continuously deliver the highest possible power to the load when variations in the insolation and temperature occur. A simple method of tracking the maximum power points (MPPs) and forcing the boost converter system to operate close to these points is presented through deriving small-signal model and transfer function of boost converter. This paper aims at modeling boost converter including equivalent series resistance of input reservoir capacitor by state-space-averaging method and PWM switch model with properly designed controller for maximum photovoltaic power tracking control.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 제40회 하계학술대회
• /
• pp.494_495
• /
• 2009

This paper presents a study of DFIG wind power generation system for real-time simulation. For real-time simulation, the real-time digital simulator (RTDS) and its user friendly interface simulation software (RSCAD) are used. 2.2MW grid-connected variable speed DFIG wind power generation system is modeled and analyzed in this study. Stator-flux oriented vector control scheme is applied to stator, rotor side converter control, and back-to-back PWM converters are implemented for the decoupled control. The real-wind speed signal extracted by an anemometer is used for realistic and accurate simulation analysis. Block diagrams for DFIG and control scheme of stator, rotor-side are introduced. Real-time simulation cases are carried out and analyzed for the validity of this work.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1996년도 한국자동제어학술회의논문집(국내학술편); 포항공과대학교, 포항; 24-26 Oct. 1996
• /
• pp.323-326
• /
• 1996

In a simple system, the control schemes work well provided that the characteristic of the plant or the coefficients are known and fixed. But the condition is not met in the system like satellite, for example, varying over time and the coefficients of dynamic system change due to disturbance, etc, and the better precise model is required to control the given dynamic system well. Conversely, the fixed controller make the unmodel dynamic system with a wide class of modelling error be stable within the error tolerance limits. Also, a robust model reference adaptive control scheme is designed for the plant, paying attention to the derivation of the appropriate parametric model and the design of the normalizing signal to guarantee that it has the desired properties.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1992년도 하계학술대회 논문집 A
• /
• pp.55-58
• /
• 1992

Due to the fault signal containing high and/or slowly decaying dc off-set component, saturation of current transformers cause errors in reproducing secondary current and therefore, secondary current is distorted, which cause relay to maloperate. In this paper, a new method which determines whether current transfomer is saturated is proposed. By designing digital filter of current transfomer, although secondary is distorted, exact secondary current can be reproduced.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 추계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.286-293
• /
• 2002

Photovoltaic systems normally use a maximum power point tracking (MPPT) technique to continuously deliver the highest possible power to the load when variations in the insolation and temperature occur. A simple method of tracking the maximum power points (MPPs) and forcing the boost converter system to operate close to these Points is presented through deriving small-signal model and transfer function of boost converter. This paper aims at modeling boost converter including equivalent series resistance of input reservoir capacitor by state-space-averaging method and PWM switch model. In the future, properly designed controller for compensation will be constructed in real system for maximum photovoltaic power tracking control.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 춘계학술대회 논문집
• /
• pp.275-276
• /
• 2006

An intelligent arm-wrestling system is recently developed in our laboratory that is comprised of an arm-force generation mechanism and a control system that detects the maximum arm-force of a user in the early stage of the match, generates a different game scenario each time, and executes force feedback control to implement the scenario. This paper presents the mathematical model of the force control system of the intelligent arm-wrestling system, and some improvements of it via experimental frequency responses using a control signal analyzer.

• 대한후두음성언어의학회지
• /
• 제7권1호
• /
• pp.43-49
• /
• 1996

In this study, remote articulation training system which connects the hearing disabled trainee and the speech therapist via B-ISDN is introduced. The hearing disabled does not have the hearing feedback of his own pronuciation, and the chance of watching his speech organs movement trajectory will offer him the self-training of articulation. So the system has two purposes of self articulation training and trainer's on-line checking in remote place. We estimate the vocal tract articultory movements from the speech signal using inverse modelling and display the movement trajectoy on the sideview of human face graphically. The trajectories of trainees articulation is displayed along with the reference trajectories, so the trainee can control his articulating to make the two trajectories overlapped. For on-line communication and ckecking training record the system has the function of video conferencing and tranferring articulatory data.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 1996년도 춘계학술발표회논문집(4)
• /
• pp.283-288
• /
• 1996

Core support barrel (CSB) assembly is one of the most important reactor internals structures supporting and protecting the nuclear core during normal operation and faulted events. For Yonggwang 3 and 4 (YGN 3&4), the adequacy of the analytical response prediction of reactor internals for flow induced vibration was demonstrated through the comprehensive vibration assessment program (CVAP) performed during hot functional test. Besides, the vibration characteristics of the CSB of operating nuclear power plant can be examined via the excore neutron noise monitoring signal. In this paper data from YGN 4 analyses, CVAP, and neutron noise monitoring system are compared and evaluated. In general, the results are comparable each other and conservative enough to ensure sufficient design margin and structural integrity. Further investigations on the modelling and analyses procedure are recommended to utilize the experimental results to the maximum extent. And collection of the neutron noise data is desired to serve as a baseline information.