• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1993년도 정기총회 및 추계학술대회 논문집 학회본부
• /
• pp.317-319
• /
• 1993

The function estimation characteristics of neural networks can be used for sensor signal validation of a system. In case of applying the neural networks to signal validation, it is a important problem that the redundant sensor signals used as a input signal of neural networks should be validated. In this paper, we simplify the conventional parity space method in order to input the validated signal to the neural networks and also propose the sensor signal validation method, which estimates the reliable sensor output combining neural networks with the simplified parity space method. The acceptability of the proposed signal validation method is demonstrated by using the simulation data in safety injection accident of nuclear power plants.

• 대한전자공학회논문지SD
• /
• 제41권9호
• /
• pp.49-56
• /
• 2004

HgCdTe 64×2 중원적외선 이중대역 동시검출기를 위한 포화전류차단 회로를 갖는 BDI입력방식의 신호취득회로(ROIC)를 설계하였다. 제안된 포화차단 회로를 통해서 중적외선 신호가 포화되면 원적외선 신호도 왜곡이 일어나던 기존의 문제점을 해결함으로써 120k정도 더 넓은 온도 영역의 물체까지 측정할 수 있는 범위를 확보하고 중적외선 검출기에서 발생하는 dead pixel에 의해 원적외선 검출기의 성능은 영향받지 않는 특성을 보였다. 회로 제작에 사용한 공정은 0.Sum 2-poly 3-metal Hynix CMOS 공정이었다. 측정결과 중적외선 신호와 원적외선 신호가 동시에 처리되는 것을 확인할 수 있었다. 또한, 측정된 잡음의 크기는 상온에서 53uV로서 동작온도 77K의 값으로 환산시켜 보았을 때 27uV로 ROIC의 특성이95% BLIP 조건을 만족함을 알 수 있었다.

• 한국광학회:학술대회논문집
• /
• 한국광학회 2008년도 동계학술발표회 논문집
• /
• pp.295-296
• /
• 2008

• 한국항공우주학회지
• /
• 제33권1호
• /
• pp.78-84
• /
• 2005

환형 노즐을 갖는 불화중수소 화학레이저 시스템에서 레이저빔 발진은 불소 원자와 중수소 분자의 혼합을 통해서 얻어진다. 초음속 연소기에서 연료의 분사각이 성능에 큰 영향을 미친다는 연구에 근거하여, 혼합률을 증진시키기 위한 연구로서 주유동과 일정각을 가지고 분사되는 중수소의 불소 원자와의 혼합률 증진에 대한 수치적 연구를 수행하였다. 중요 결과로서 중수소 분사각(10, 20, 40도)이 커짐에 따라서 최대 소신호 광학이득계수와 레이저 공동내의 압력이 상승하게 된다. 또한, 광학이득계수와 공동압력의 관점에서 불화중수소 화학레이저 발진을 위한 최대 성능은 20~40도 사이의 중수소 분사각에서 나타난다.

• 한국통신학회논문지
• /
• 제34권2C호
• /
• pp.217-225
• /
• 2009

OFDM(Orthogonal Frequency Division Multiplexing) 시스템을 포함한 다중 반송파 시스템에서 발생하는 PAPR(Peak-to-Average Power Ratio)을 감소시키기 위해 특정 톤 위치에 새로운 톤을 삽입하는 톤 삽입 기법은 성상도를 확장하여 평균 신호전력 대비 최대 신호 전력을 감소시키는 기법이다. 이러한 톤 삽입 기법은 최적의 PAPR 저감 성능을 얻기 위한 삽입 톤 결정을 위해 많은 탐색 연산량을 필요로 함과 동시에 높은 전력상승의 문제를 야기하는 반면, 전력상승을 고려하여 삽입 톤을 결정하면 사용 가능한 톤 삽입 신호가 제한됨에 따라 PAPR 저감 성능이 낮아진다. 따라서 본 논문에서는 기존의 톤 삽입 기법이 갖는 상충적인 목적들을 다목적 최적화 기법에 적용하여 PAPR 저감 성능과 전력상승을 절충하여 상호간의 유연한 조절이 가능한 가중함 유전자 알고리즘 기반의 톤 삽입 기법을 제안한다 모의 실험을 통하여 제안한 가중함 유전자 알고리즘 기반의 톤 삽입 방법은 PAPR과 전력상승의 문제를 사용자의 의사를 반영하는 가중치에 따라 적절하게 조절할 수 있음을 확인하였다.

• 한국광학회지
• /
• 제23권1호
• /
• pp.42-51
• /
• 2012

본 논문에서는 패브리 페롯 레이저 다이오드(FP-LD : Fabry-Perot LD)에서 활성층 구조에 따른 주입 잠금 특성을 비교하였다. 편광 및 무편광 다중양자우물 구조와 무편광 벌크 구조의 이득 스펙트럼 및 주입 캐리어 밀도에 따른 최대 이득 특성을 TE, TM 편광에 대하여 계산하였다. 계산된 이득 파라미터를 시영역 대신호 모델에 적용하여 FP-LD의 주입 잠금 특성을 확인한 결과, 무편광 FP-LD가 편광 FP-LD 에 비하여 RIN(Relative Intensity Noise) 특성 면에서 약 3 dB 정도 우수하고, 2.5 Gbps 변조시에 아이 특성이 훨씬 우수함을 알 수 있다.

• 대한기계학회논문집
• /
• 제19권9호
• /
• pp.2373-2385
• /
• 1995

The goals of this study are to apply exciplex method to the visualization of the fuel spray of a diesel engine and to investigate the liquid phase of fuel spray that injected at the various tips of a fuel injector. This study provides the informations for the improvement of the diesel injection system and the structures of diesel spry with the boiling of fuel droplets in combustion chamber by the exciplex method. Hexame was used as fuel for approximation to injection condition of the engine. And naphthalene and TMDP were added to the fuel for the visualization by exciplex method. Experimental injectors were 4hole, 8hole, and 1hole impinging injectors. In the injection condition of actual engine the exciplex was sufficient to catch the liquid phase signal. The spray penetration of impinging injector was small than that of actual 4 and 8hole injector but atomization was better. The upper bound of impinging injector was determined by the geometry of a cylinder head and the lower bound was determined by spray angle. On impinging injector the atomization was better at the edge of disk than at center of disk and also the mixing with environmental gas was better.

• 한국기계가공학회지
• /
• 제13권6호
• /
• pp.73-81
• /
• 2014

In this paper, multiple gate locations and process conditions under concern are automatically optimized by considering robustness to minimize the injection pressure required to mold an automotive dashboard. Computer simulation-based experiments using orthogonal arrays(OA) and a design-range reduction algorithm are consolidated into an iterative search scheme, which is then used as a tool for the optimization process. The robustness of a design is evaluated using an OA-based simulation of process fluctuations due to noise as well as the signal-to-noise ratio. The optimal design solution for the automotive dashboard shows that the robustness of the injection pressure is significantly improved when compared to the initial design. As a result, both the die clamping force and the pressure distribution in the part cavity are also much improved in terms of their robustness.

• Design & Manufacturing
• /
• 제17권3호
• /
• pp.34-40
• /
• 2023

In this study, real-time collection of mold vibration signals during injection molding processes was achieved through IoT devices installed on the mold surface. To analyze changes in the collected vibration signals, injection molding was performed under six different process conditions. Analysis of the mold vibration signals according to process conditions revealed distinct trends and patterns. Based on this result, cosine similarity was applied to compare pattern changes in the mold vibration signals. The similarity in time and acceleration vector space between the collected data was analyzed. The results showed that under identical conditions for all six process settings, the cosine similarity remained around 0.92±0.07. However, when different process conditions were applied, the cosine similarity decreased to the range of 0.47±0.07. Based on these results, a cosine similarity threshold of 0.60~0.70 was established. When applied to the analysis of mold vibration signals, it was possible to determine whether the molding process was stable or whether variations had occurred due to changes in process conditions. This establishes the potential use of cosine similarity based on mold vibration signals in future applications for real-time monitoring of molding process changes and anomaly detection.

• Design & Manufacturing
• /
• 제18권2호
• /
• pp.41-50
• /
• 2024

In this study, experimental design methods were used to derive optimal process conditions for improving the thickness uniformity of a 0.40 mm, 3.5 inch light guide panel. Process mapping and expert group analysis were used to identify factors that influence the thickness of injection molded products. The key factors identified were mold temperature, mold temperature, injection speed, packing pressure, packing time, clamp force, and flash time. Considering the resin manufacturer's recommended process conditions and the process conditions for similar light guide plates, a three-level range was selected for the identified influencing factors. L27 orthogonal array process conditions were generated using the Taguchi method. Injection molding was performed using these L27 orthogonal array to mold the 3.5 inch light guide plates. Thickness measurements were then taken, and the results were analyzed using the signal-to-noise ratio to maximize the CpK value, leading to the determination of the optimal process conditions. The thickness uniformity of the product was analyzed by applying the derived optimum process conditions. The results showed a 97.5% improvement in the Cpk value of 3.22 compared to the process conditions used for similar light guide plates.