• 전자공학회논문지C
• /
• 제35C권7호
• /
• pp.11-19
• /
• 1998

A signal line potential variation due to the delta-I noise was physically investigated in CMOS integrated circuits. An equivalent circuit for the noise analysis was presented. The signal line was modeled as segmented RC-lumped circuits with the ground noise. Then the equivalent circuit was mathematically analyzed. Therebvy a new signal line potential variation model due to the switching mosie was developed. Th emodel was verified with 0.35.mu.m CMOS deivce model parameters. The model has an excellent agreement with HSPICE simulation. Thus the proposed model can be dirctly employed in the industry to design the high-performance integrted circuit design as well as integrated circuit package design.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2004년도 추계학술대회 논문집
• /
• pp.1461-1466
• /
• 2004

Recently Domestic EMU's on board signal systems are gradually changed form Cab signal(Fix Block) to Distance-to-go. Interfaces with on board signal system, TCMS Redundancy structure is mainly required. This paper suggest Manaul/Automatic Driving based on TCMS-ATC interface and design of backup system which is operated by Stan-by Computer when one of it's Local Interface Unit(LIU) is out of oder. For the purpose of Precision Train Stop, Distance-to-go signal system require accuracy speed. Free-axle structure is required for this system This paper suggest Free-axle braking system that lack of brake-force is compensated by the distributed brake-force using TCMS. And one of braking system has out of order, compensation of brake-force for Free-axle system. Then we prove our design to Complete Car Test

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제14권6호
• /
• pp.768-776
• /
• 2014

Using a simplified high-frequency small-signal equivalent circuit model for BSIM3 MOSFET, the fully differential two-stage folded-cascode CMOS operational amplifier is analyzed to obtain its small-signal voltage transfer function. As a result, the expressions for dc gain, five zero frequencies, five pole frequencies, unity-gain frequency, and phase margin are derived for op amp design using design equations. Then the analysis result is verified through the comparison with Spice simulations of both a high speed op amp and a low power op amp designed for the $0.13{\mu}m$ CMOS process.

• 한국인터넷방송통신학회논문지
• /
• 제23권5호
• /
• pp.41-46
• /
• 2023

레이다 시스템에서 최대 탐지거리를 충족하는 것은 매우 중요하다. 최대 탐지거리를 충족하기 위해서는 레이다 시스템의 수신신호에 대한 민감도가 높아야 한다. 또한 레이다 신호처리기에서 동적 영역이 넓어야 한다. 이러한 요구사항을 충족하기 위해서는 신호처리기 보드가 외부 및 내부 노이즈에 강인하게 설계되어야 한다. 특히 보드 내부에서 여러 스위칭 회로로 인하여 발생되는 잡음이 수신되는 레이다 신호에 영향을 최소화 하기 위한 설계가 필요하다. 본 논문에서는 레이다 시스템 성능을 충족하기 위하여 신호처리기 보드의 요구사항을 도출하고 도출된 요구사항을 충족하기 위한 설계에 대하여 기술한다. 또한 외부에서 입력되어 들어오거나 내부에서 생성되는 노이즈의 영향을 최소화 하기 위한 EMC 설계에 대하여 기술한다. 제작된 보드의 시험을 통하여 확보된 성능을 확인한다.

• 한국자동차공학회논문집
• /
• 제15권2호
• /
• pp.126-134
• /
• 2007

Although there has been substantial research on the squeal noise for the automotive brake system, robust design issues with respect to control factors equivalent to design variables in optimization, noise factors due to system uncertainties, and signal factors designed to accommodate a user-adjustable setting still need to be addressed. For the purpose, the robust design applied to the disk brake system has been investigated by DOE (Design of Experiments) based Taguchi analysis with dynamic characteristics. The specific goal of this methodology is to identify a design with linear signal-response relationship, and variability minimization. The finite element models of the disk brake assembly have been constructed, and the squeal noise problems have been solved by complex eigenvalue analysis. As the practical robust design to reduce the brake squeal noise, material properties of pad, disk, and backplate, thickness and geometry of pad are selected as control factors, material properties of pad and disk, and the contact stiffness have been considered as noise factors, and friction coefficient between pad and disk is chosen as a signal factor. Through the DOE based robust design, the signal-to-noise ratio and the sensitivity for each orthogonal array experiment have been analyzed. Also, it has been proved that the proposed robust design is effective and adequate to reduce the brake squeal noise.

• 한국정보전자통신기술학회논문지
• /
• 제4권1호
• /
• pp.39-45
• /
• 2011

본 논문에서는 공통의 플랫폼을 기반으로 하는 모바일 와이맥스 기지국 운용용 휴대형 신호분석 시스템의 설계방법을 제안하고, 이를 하드웨어 모듈로 구현하였다. 새롭게 제안한 신호분석 방법은 RF 신호의 IF 신호로의 하향 변환 및 이득제어를 수행하는 광대역 RF 모듈과 계측 기능을 수행하는 DSP 기반 디지털 신호분석 모듈로 구현하는 것이다. 타 고정 대형 시스템과의 비교를 통해 수행한 신호분석 알고리즘의 성능을 검증한 결과, 분해능의 차이는 없음을 확인하였다.

• Journal of Positioning, Navigation, and Timing
• /
• 제6권1호
• /
• pp.1-8
• /
• 2017

In this study, to design a multi-GNSS receiver using single RF front-end, the receiving performances for various frequency plans were evaluated. For the fair evaluation and comparison of different frequency plans, the same signal needs to be received at the same time. For this purpose, two synchronized RF front-ends were configured using USRP X310, and PC-based software was implemented so that the quality of the digital IF signal received at each front-end could be evaluated. The software consisted of USRP control, signal reception, signal acquisition, signal tracking, and C/N0 estimation function. Using the implemented software and USRP-based hardware, the signal receiving performances for various frequency plans, such as the signal attenuation status, overlapping of different systems, and the use of imaginary or real signal, were evaluated based on the C/N0 value. The results of the receiving performance measurement for the various frequency plans suggested in this study would be useful reference data for the design of a multi-GNSS receiver in the future.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2006년도 International Symposium on GPS/GNSS Vol.2
• /
• pp.211-215
• /
• 2006

In this paper, design and applications of a generalized, versatile and customizable IF signal generator that can model the modernized GPS and Galileo signal is given. It generates IF sampled data that can be directly used by a software receiver. Entire constellation of satellites which is independent of satellite-user geometry is easily determined using a real or simulated ephemeris data. Since the IF center frequency, sampling frequency and quantization bit number are user location dependent parameters, their effects are also considered in IF signal generator. The generalized IF signal generator will be very well suited for the development phase of a software receiver due to its versatility. The full access to the sampling frequency, front-end filter definition and ADC parameters also offers a great opportunity for cost-effective analysis of tracking loops and error mitigation techniques at the receiver level. Interference sources can be easily added to the generator to simulate specific environments. This software IF signal generator can also be used to feed a multi-frequency multi-system software receiver for the prototyping of a combined GPS/Galileo receiver. The test result using the generated signals and a real software receiver shows the effectiveness of the implemented IF signal generator.

• 대한전자공학회논문지
• /
• 제23권3호
• /
• pp.384-388
• /
• 1986

This paper describes the design and fabrication of an integrated circuit that can detect the teletext signal included in a composite video signal. The circuit that is based on the comparatorlevel sampling method can detect a stable data signal even from an external circuit with large variation. It has been fabricated by the SST bipolar standard process. Its chip size is $2.5x3.78mm^2$.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1992년도 한국자동제어학술회의논문집(국내학술편); KOEX, Seoul; 19-21 Oct. 1992
• /
• pp.829-833
• /
• 1992

This paper presents the design of an automated EEG analyzing system. The design considerations including processing speed, A/D conversion, filtering, and waveforms detection, are overviewed with the description of the associated EEG characteristics. The architecture of the currently implemented system consists of a p-controller based front-end signal processing unit and a host computer system. The data acquisition procedures are described along with a couple of illustrations of the acquired EEG/EOG signal.