• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.17 no.4 s.107
• /
• pp.341-350
• /
• 2006

In this paper, a new method for detecting breast cancer is proposed, which utilizes dielectric characteristics of pathological tissues and time delay of back scattered response, and its feasibility was investigated. We have developed a detection algorithm and verified it by numerical simulation and measurement for a prototype system. For a prototype system, we have fabricated experimental model(artificial breast with a cancer) and UWB(ultra-wideband) antenna. The results of the measurement simulation show an excellent detection capability of a cancer tissue. It is found that a good UWB antenna and a good calibration signal are key elements of such detection system. Further study is ongoing to develop a commercial system.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.23 no.9
• /
• pp.1019-1024
• /
• 2012

In this paper, a UWB antenna using a SIR(Step Impedance Resonator) that eliminate signal interference at 5 GHz WLAN as the first rejection band and adjust the second rejection band is proposed. Unlike the unit impedance resonator, the second harmonic of SIR is decided according to step impedance. Therefore, To adjust the second rejection band, SIR is applied to UWB antenna. Also, the equivalent circuit of the antenna at first rejection band is presented and the equivalent modeling values of the SIR and the coupling value is obtained. The proposed antenna is satisfied to cover full UWB band with return losses less than -10 dB and has band rejection characteristic in 5 GHz WLAN band. The radiation patterns show +y directivity characteristics in H-plane and the group delay variations are within 1.0 ns.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2013.10a
• /
• pp.405-408
• /
• 2013

The performance of underwater acoustic(UWA) communication system is sensitive to the Inter-Symbol Interference(ISI) due to delay spread develop of multipath signal propagation. And due to limited frequency using acoustic wave, UWA is a low transmission rate. Thus, it is necessary technique of Space-time code, equalizer and channel code to improve transmission speed and eliminate ISI. In this paper, UWA communication system were analyzed by simulation using these techniques. In the result of simulation, the proposed Space-time code, Turbo code, and Zero forcing techniques is shown that improved performance than conventional UWA communication.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.62 no.6
• /
• pp.744-749
• /
• 2013

The protection switching technology is widely adopted in the fiber-optical transmission equipments based on TDM(Time Division Multiplexing), such as PDH, SDH/SONET. A variety of protection switching algorithms for Ethernet networks and the progress of standardization are summarized in the document. There are several kinds of protection switching algorithms for Ethernet networks, such as STP, RSTP, MSTP and etc. However, since Ethernet signal move through detour route, it causes much time to recover. Accordingly, it is difficult to secure a usability of Ethernet networks and QOS(Quality of Service). Also, if the protection switching protocol standardized by IEEE and ITU-T is used, it remains a inherent network switching time for protection. Therefore, a specific protection switching algorithm for Ethernet are needed for seamless and stable operation of Ethernet networks service for Distribution Automation System(DAS). A reliable protection algorithm with no switching delay time is very important to implement Self-healing service for DAS. This study of FPGA based protection switching algorithm for Ethernet networks shows that in case of faults occurrence on distribution power network, immediate fault isolation and restoration are conducted through interaction with distribution equipments using P2P(Peer to Peer) communication for protection coordination. It is concluded that FPGA based protection switching algorithm for Ethernet networks available 0ms switching time is crucial technology to secure reliability of DAS.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.4A
• /
• pp.378-383
• /
• 2004

Orthogonal Frequency Division Multiplexing (OFDM) transmits high-speed data by splitting the transmission bandwidth into a number of subcarriers. The bandwidth of each subcarrier is ensured to be smaller than the coherence bandwidth. This paper presents an OFDM system incorporated with the Carrier Interferometry (CI) codes to improve the performance by enhancing frequency diversity effect. The performances of CI-OFDM with multilevel modulations are investigated in highly dispersive fading channels. For the investigation of performance improvement of CI-OFDM, a simulator has been developed using a well-known SPW simulation platform. The simulation results show that the CI-OFDM provides both performance improvement and robustness against dispersive fading channel behavior. The performance of CI-OFBM with multilevel modulations demonstrates that CI-OFDM outperforms a traditional OFDM system, particularly in highly dispersive channels. With a relatively large delay spread of 151㎱ compared to the guard interval of 800㎱, CI-OFDM provides a BER of 10$^{-3}$ if sufficient signal power is present.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38A no.7
• /
• pp.545-551
• /
• 2013

Timing recovery loop composed of the Timing Error Detector(TED), loop filter and resampler is widely used for the timing synchronization in MQASK receivers. Since TED is sensitive to the delay between the symbol period of the signal and sampling period, the output is averaged out when the symbol rate and sampling rate are quite different the recovery loop cannot work at all. This paper presents a sampling frequency discriminator (SRD), which detects the frequency offset of the sampling clock to the symbol clock of the MQASK data transmitted. Employing the SRD, the closed loop timing recovery scheme performs the frequency-aided timing acquisition and achieve the synchronization at extremely high sampling frequency offset, which can be used in variable symbol rate MQASK receivers.

• Proceedings of the Korea Society for Simulation Conference
• /
• 1999.10a
• /
• pp.87-92
• /
• 1999

교차로 접근지체의 산정은 간선도로의 서비스수준 평가에 있어서 가장 중요한 요소 중의 하나이다. 교차로 접근지체는 상류부 교차로에서 진입하는 교통에 대한 균일지체와 그 이외 단일로 상에 존재하는 세가로등에서 유입되는 교통에 대한 무작위지체, 1회의 신호주기에 교차로를 통과하지 못한 교통에 대한 잔여지체 등과 연동보정계수를 이용하여 산정된다. 우리나라를 비롯한 대부분의 나라에서는 미국에서 차량의 지체와 연동보정계수를 이용하여 개발된 교차로 접근지체 산정식의 구조를 그대로 수용하고 있다. 그러나 도심부 신호교차로 사이의 단일로에 보행자를 위한 횡단신호가 설치되어 있는 경우, 이러한 단일로 횡단신호가 하류부 교차로의 접근지체에 미치는 영향이 있을 것으로 판단한다. 따라서 미국과는 달리 신호교차로간의 간격이 크고, 단일로 상에 보행자용 횡단시호 설치가 빈번한 우리나라의 실정에서는 이에 대한 영향을 분석하여 교차로 접근지체 산정 시 이를 반영하는 것이 바람직하다. 본 연구에서는 단일로 횡단신호가 하류부 신호교차로에서의 접근지체에 미치는 영향을 분석하기 위하여, 상류부 교차로와 단일로 중간부 횡단보도와의 거리, v/c 비, 신호 offset 등 상황을 설정하여 TRANSYT-7F를 이용하여 시뮬레이션을 수행하였다. 본 연구에 의하면 단이로 중간의 횡단신호가 상류부 교차로의 신호와 연동되지 않는 경우에는 하류부 교차로의 접근지체에 미치는 영향이 거의 없는 것으로 나타났으며, 연동 시에는 상류부 교차로와의 거리, v/c 비, 신호 offset 등에 따라 최고 80% 이상 까지 접근지체가 증가하였다. 일반적으로 신호 offset이 40%에서 60% 사이로 연동상태가 불량할수록 하류부 교차로에서의 접근지체가 증가하는 것으로 나타났으며, 그 외에 변수에 대하여서도 신호 offset에 따라 다른 정도로 접근지체에 영향을 미치는 것으로 나타났다. 따라서 현재 우리나라의 신도시 개발 시 일반적으로 나타나는 대규모 구획(super block)과 이로 인하여 불가피한 단일로 중간부의 횡단신호의 설치는 교통운영 측면에서 재고되어야 할 것으로 판단된다.

• Proceedings of the KSR Conference
• /
• 2003.10c
• /
• pp.236-246
• /
• 2003

This paper is implemented a control algorithm in order to be stable and minimized to entire train traffic system at delayed case. Signal ing system is described wi th algebraic equations given for train headway, Discrete-event simulation principles are reviewed and a demonstration block signaling model using the technique is implemented. Train congestion at station entrance for short headway operation is demonstrated and the propagation of delays along a platform of trains from any imposed delay to the leading train is also shown. A rail way signaling system is by nature a distributed operation with event triggered at discrete intervals. Although the train kinematic variables of position, velocity, and acceleration are continually changing, the changes are triggered when the trains pass over section boundaries and arrive at signals and route switches. This paper deals with linear-mode1ing, stability and optimal control for the traffic on such metro line of the model is reconstructed in order to adapt the circuits. This paper propose optimal control laws wi th state feedback ensuring the stability of the modeled system for circuits. Simulation results show the benefit to be expected from an efficient traffic control. The main results are summarized as follows: 1. In this paper we develop a linear model describing the traffic for both loop lines, two state space equations have been analyzed. The first one is adapted to the situation where a complete nominal time schedule is available while second one is adapted when only the nominal time interval between trains is known, in both cases we show the unstability of the traffic when the proceeding train is delayed following properties, - They are easily implemented at law cost on existing lines. - They ensure the exponetial stability of loop system. 2. These control laws have been tested on a traffic simulation software taking into the non-linearites and the physical constraints on a metro line. By means of simulation, the efficiency of the proposed optimal control laws are shown.

• Korean Journal of Optics and Photonics
• /
• v.19 no.5
• /
• pp.370-375
• /
• 2008

High-speed high-resolution terahertz time-domain spectroscopy (THz-TDS) is demonstrated using the asynchronous-opticalsampling (AOS) method. A time-domain signal with a 10-ns time window is rapidly acquired by using two femtosecond lasers with slightly different repetition frequencies to generate and detect a terahertz pulse wave, without a mechanical delay stage. The spectrum obtained by the fast Fourier transformation (FFT) of the time-domain waveform has a frequency resolution of 100 MHz. The time resolution of our spectrometer is measured using the cross-correlation method to be 278 fs. A transmission spectrum of water vapor is measured and the absorption lines are analyzed in the frequency range from 0.1 to 1.2 THz.

• Journal of the Korean Magnetics Society
• /
• v.13 no.5
• /
• pp.216-220
• /
• 2003

In this work, transmission characteristics of read and write signal were calculated when a MRAM (magnetic random access memory) cell is operated up to 10 GHz. Test device having long read and write lines was modeled in 3 dimensions to perform a simulation. The simulation was divided into two parts, read and write operations, and S-parameters were computed utilizing FEM (finite element method) algorithm. Transmission coefficients, S$\sub$21/, for read and write operations of MRAM device which was designed for a single cell test configuration were analyzed from DC to 1 GHz and DC to 10 GHz, respectively. When the insulator thickness between the bit and sense lines was increased from 500 to 1500 ${\AA}$, 3 dB attenuation frequency was increased by 3.3 times, from 135 to 430 MHz. The length of the bit and sense lines were 600 ${\mu}$m. In addition, access time was estimated by calculating the propagation delay utilizing S-parameters.