• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.48 no.4
• /
• pp.6-14
• /
• 2011

The fast growing of the number of users requires the development of reliable communication systems able to provide higher data rates. In order to meet those requirements, techniques such as Multiple Input Multiple Out (MIMO) and Orthogonal Frequency Division multiplexing (OFDM) have been developed in the recent years. In order to combine the benefits of both techniques, the research activity is currently focused on MIMO-OFDM systems. In addition, for a fast wireless channel environment, the data rate and reliability can be optimized by setting the modulation and coding adaptively according to the channel conditions; and using sub-carrier frequency, and power allocation techniques. Depending on how accurate the feedback-based system obtain the channel state information (CSI) and feed it back to the transmitter without delay, the overall system performance would be poor or optimal. In this paper, we propose a Signal to Noise Ratio (SNR) estimation algorithm where the preamble is known for both sides of the transciever. Through simulations made over several channel environments, we prove that our proposed SNR estimation algorithm is more accurate compared with the traditional SNR estimation. Also, We applied AMC on several channel environments using the parameters of IEEE 802.11n, and compared the Throughput performance when using each of the different SNR Estimation Algorithms. The results obtained in the simulation confirm that the proposed algorithm produces the highest Throughput performance.

• Journal of Broadcast Engineering
• /
• v.16 no.2
• /
• pp.207-215
• /
• 2011

A signal passed through multi-path channel suffers ISI(Inter-Symbol Interference) and severe distortions caused by channel delay spread and noise components at the SC-FDE(Single Carrier with Frequency Domain Equalizer) transmission. Conventional UW(Unique-Word) based SC-FDE iterative channel estimation improves channel estimation performance by smoothing estimated CIR(Channel Impulse Response) of the noise components outside the channel length at time domain and restoring the broken cyclic property through UW reconstruction. In this paper, we propose channel estimation scheme through noise suppression within channel length. To suppress the noise, we estimate noise standard deviation as estimated CIR of the noise components outside the channel length and make criteria of the noise standard deviation gain that doesn't affect the original signal samples. When estimated CIR samples within channel length are less than the criteria value using the noise standard deviation and gain, the noise components are removed. Simulation results show that the proposed channel estimation scheme brings good channel MSE(Mean Square Error) and good BER(Bit Error Rate) performance.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2007.10a
• /
• pp.477-481
• /
• 2007

The emergency patient who occurs from the place where it is various the control which is quick must come to accomplish in Ubiquitous environment. In the body of the patient or the old person the organism signal sensor about under attaching condition of the patient at real-time about under the monitor ring about under disposing the control which is quick against the emergency patient does to become accomplished at the case real-time when the above will get in the body of the patient or the old person. Using ZigBee (802.15.4) system base on Shor wireless communication protocol because of complement wireless of hospital. This system use ZigBee (802.15.4) system to get for electrocardiogram, blood pressure and pulse bio-sensors. This paper constructs Bio-Sensor communication monitoring system and transmission rate and the delay which it follows possibility and node occurrence rate of wireless sensor network construction hour transmission session it leads and it verifies the effectiveness.

• Korean Journal of Cognitive Science
• /
• v.26 no.3
• /
• pp.357-375
• /
• 2015

In our daily life, the probability of target prevalence in visual search varies from very low to high. However, most laboratory studies of visual search used a fixed probability of target prevalence at 50%. The present study examined the properties of information processing during visual search where the probability of target prevalence was manipulated to vary from low (20%), medium (50%), to high (80%). The search items were made of simple shape stimuli, and search accuracy, signal detection measures, and reaction times (RTs) were analyzed for characterizing the effect of target prevalence on the information processing strategies for visual search. The analyses showed that the rates of misses increased whereas those of false alarms decreased in the search condition of low target prevalence, whereas the pattern was reversed in the high prevalence condition. Signal detection measures revealed that the target prevalence shifted response criterion (c) without affecting sensitivity (d'). In addition, RTs for correct rejection responses in the target-absent trials became delayed as the prevalence increased, whereas those for hits in the target-present trials were relatively constant regardless of the prevalence. The RT delay in the target-absent trials indicates that increased target prevalence made the 'quitting threshold' for search termination more conservative. These results support an account that the target prevalence effect in visual search arises from a shift of decision criteria and the subsequent changes in search information processing, while rejecting the account of a speed-accuracy tradeoff.

• Journal of the Institute of Convergence Signal Processing
• /
• v.19 no.2
• /
• pp.68-76
• /
• 2018

In this paper, we describe the correlation processing method of multi-polarization observation data of the Daejeon Correlator. VLBI observations include single or multiple polarized observations depending on the type of object. Polarization observations are performed to observe the characteristics of the object. During the observations of the celestial object, polarization measurements are also performed to determine the delay values and causes of changes in the object. Correlation processing of polarization observation data of the Daejeon correlator is proposed by OCTAVIA of a synchronous reproduction processing apparatus that outputs data input to each antenna unit by using an output bit selection function to convert bits and the order of the data streams is changed, And the input of the Daejeon correlator is configured to perform the polarization correlation processing by conducting correlation processing by setting the existing stream number to be the same. Correlation processing is conducted on the test data observed for the polarization correlation processing and it is verified through experiments that the polarization correlation processing method of the proposed Daejeon correlator is effective.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.19 no.5
• /
• pp.872-882
• /
• 1994

In this paper, the Low Noise Amplifier(LNA) is designed and fabricated to include a band pass filter characteristics considering the antenna system characteristics according to the transmitting and receiving signal level of communication satellite transponder. As an example, a 2-stage low noise amplifier and a 4-stage amplifier and designed, fabricated and measured at 14,0~14.5GHz of receiving frequency band. This fabricated LNA has shown the gain with very good flatness within pass-band, and its gain decreases rapidly out of band resulting in supperssion of the transmitting signal power leakage. It has shown the 20.3dB +- 0.1dB of pass-band gain, the 1.44dB +-0.04dB of noise figure and the 14dB rejection out of band(12.25~12.75GHz). The gain flatness, noise figure and group delay of this 2-stage LNA satisfactorily met the simulation results. And the fabricated 4-stage amplifier has shown the more than 42dB of pass-band gain, the +-0.25dB of flatness and the 28dB of the rejection effect for transmitting power leakage. The 2-stage LNA and 4-stage amplifier, in this paper, will bring a design margin for the input filter and also result in the system cost reduction.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.1A
• /
• pp.33-43
• /
• 2010

Recently, users want to use real-time multimedia services, such as internet, VoIP, etc., using their IEEE 802.11 wireless lan mobile stations. In order to provide such services, a handoff among access points is essential to support the mobility of a node, in such an wide area. However, the legacy handoff methods of IEEE 802.11 technology are easy to lose connections. Also, the recognition of a disconnection and channel re-searching time make the major delay of the next AP to connect. In addition, because IEEE 802.11 decides the selection of an AP depending only on received signal strength, regardless of a node direction, position, etc., it cannot guarantee a stable bandwidth for communication. Therefore, in order to provide a real-time multimedia service, a node must reduce the disconnection time and needs an appropriate algorithm to support a sufficient communication bandwidth. In this paper, we suggest an algorithm which predicts a handoff point of a moving node by using GPS location information, and guarantees a high transmission bandwidth according to the signal strength and the distance. We implemented the suggested algorithm, and confirmed the superiority of our algorithm by reducing around 3.7ms of the layer-2 disconnection time, and guaranteed 24.8% of the communication bandwidth.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.2B
• /
• pp.98-106
• /
• 2006

In order to provide a realtime transmission over a wireless LAM, we here present a new jamming based retransmission mechanism. In a legacy wireless LAN system, all stations use the binary exponential backoff algorithm to avoid collisions among frames. It is well known that the backoff algorithm causes more collisions as the numbers of active stations increases. This makes transmission of real time traffic hard. In the proposed scheme, when each station senses collisions, it promptly allows to send a jamming signal during a unique jamming window period which is determined by its own channel access count database(CACDB). This jamming windows is chosen not to be overlapped each other by using of CACDB, and thus channel access of another station is prevented. Hereafter the station gets the ownership of the medium when the wireless medium becomes idle after sending the jamming signal and sensing carrier, and then sends frame in medium. In our proposal, repeating collisions is never happened. We here assume that real time traffic use a frame of fixed length in order to make the time for receiving its ACK frame same. Comparing the proposed jamming-based retransmission scheme with the the 802.11 and 802.11e MAC by simulation. one can find that the proposed scheme have advantages in terms of delay, average backoff time, and average number of collisions per frame. One can find that the proposed scheme might be practically applicable to several applications of realtime traffic transmission in wireless LAN systems.

• Journal of Biomedical Engineering Research
• /
• v.20 no.1
• /
• pp.107-113
• /
• 1999

The purpose of this study was to develop a miniature imaging gamma probe with high performance that can detect small or residual tumors after surgery. Gamma probe detector system consists of NaI(Tl) scintillator, position sensitive photomultiplier tube (PSPMT), and collimator. PSPMT was optically coupled with 6.5 mm thick, 7.62 cm diameter of NaI(Tl) crystal and supplied with -1000V for high voltage. Parallel hexagonal hole collimator was manufactured for characteristics of 40-mm hole length, 1.3-mm hole diameter, and 0.22 mm septal thickness. Electronics consist of position and trigger signal readout systems. Position signals were obtained with summing, subtracting, and dividing circuit using preamplifer and amplifier. Trigger signals were obtained using summing amplifier, constant fraction discriminator, and gate and delay generator module with preamplifer. Data acquisition and processing were performed by Gamma-PF interface board inserted into pentium PC and PIP software. For imaging studies, flood and slit mask images were acquired using a point source. Two hole phantom images were also acquired with collimator. Intrinsic and system spatial resolutions were measured as 3.97 mm and 5.97 mm, respectively. In conclusion, Miniature gamma probe images based on the PSPMT showed good image quality, we conclude that the miniature imaging gamma probe was successfully developed and good image data were obtained. However, further studies will be required to optimize imaging characteristics.

• Journal of Korean Society of Transportation
• /
• v.21 no.4
• /
• pp.67-77
• /
• 2003

The purpose of this study is to provide the criteria for implementing unprotected left turn at intersections with variation of traffic volume on a cross road approach. Using Transyt-7F model, the delays calculated from permissive and protected left turn signal system were compared by gradually increasing the left turn volume for a certain opposing through volume up to the volume limits to which permissive left turn is more effective, Average stopped delay of the intersection was used as the measure of effectiveness in this study. The major conclusions are (1) the lighter the traffic gets in a cross road, the more the allowable left turn volume increases. The allowable left turn volume when the ratio of cross traffic to the concerned approach traffic is 0.6 appears about 50% more than the volume when the ratio is 1.0. (2) Comparing to the criteria of the manual of traffic safety facility, the results when the traffic ratio is 0.6 seem to be most similar the criteria of manual and the results when the traffic ratio are 0.8 and 1.0 appears to be lower than the criteria of manual. (3) The possible amount of making a left turn that is inversely proportional to the opposing through traffic, decreases as the number of opposing through lanes increases. The products of volume need to be used as the criteria of permissive left turn with considerable cautions because of its low consistency.