• 한국정보전자통신기술학회논문지
• /
• 제12권4호
• /
• pp.434-439
• /
• 2019

본 논문에서는 신호 대 잡음비를 향상시키기 위해서 시간지연을 보상하는 제어 알고리즘을제안하고, 제안한 제어 알고리즘을 연속파 레이더 방정식에 적용하여 목표물의 정보를 추정한다. 제안한 제어 알고리즘은 신호 대 잡음비를 향상시키기 위해서 수신신호에 가중치를 곱하여 각 배열소자의 출력신호를 향상시킨다. 레이더는 공간상에 신호를 방사하고 불체로부터 반사된 신호를 수신하여 정보를 추출한다. 그러나 무선통신환경에서는 인공 및 자연구조물로 인해서 다중 경로현상이 발생되어 시호의 시간지연이 나타나게 된다. 시간지연은 간섭신호 및 신호왜곡 현상으로 시스템 성능이 저하되어 원하는 정보를 정확히 추정하기 어렵다. 본 연구에서는 등 간격 선형 배열 안테나를 사용하여 수신신호에 가중치로 지연신호를 보상함으로서 목표물의 추정 정보를 향상 시킬 수 있다. 모의실험으로 본 연구에서 제안한 제어 알고리즘과 지연시간이 보상되지 않은 방법에 대해서 성능을 비교 분석하였으며 본 연구에서 제안한 제어 알고리즘이 원하는 목표물 거리추정 정보가 향상되었음을 입증하였다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제14권7호
• /
• pp.2891-2903
• /
• 2020

Phase-generated carrier (PGC) demodulation algorithm is the main demodulation methods in Fiber-optic interferometric sensors (FOISs). The conventional PGC demodulation algorithms are influenced by the carrier phase delay between the interference signal and the carrier signal. In this paper, an automatic carrier phase delay synchronization (CPDS) algorithm based on orthogonal phase-locked technique is proposed. The proposed algorithm can calculate the carrier phase delay value. Then the carrier phase delay can be compensated by adjusting the initial phase of the fundamental carrier and the second-harmonic carrier. The simulation results demonstrate the influence of the carrier phase delay on the demodulation performance. PGC-Arctan demodulation system based on CPDS algorithm is implemented on SoC. The experimental results show that the proposed algorithm is able to obtain and eliminate the carrier phase delay. In comparison to the conventional demodulation algorithm, the signal-to-noise and distortion ratio (SINAD) of the proposed algorithm increases 55.99dB.

• 한국시뮬레이션학회논문지
• /
• 제13권2호
• /
• pp.1-12
• /
• 2004

This paper estimated the arrival angle and electric wave delay time using the space method law and the directions of arrival (DOA) estimation algorithm in case of signal correlation. Space method law is the method used to repress cross correlation before applying the weight value to the receiving signal. The values of the diagonal elements in the correlation matrix were averaged to replace as the diagonal elements value. In the area of wireless communication or mobile communication, there are high correlations in case of low delay time difference in multiple waves. This causes the quality of the communication to drop due to interference with the desired signal elements. This paper estimated the arrival angle and electric wave delay time using the space method law and the MUSIC algorithm. With the arrival angle algorithm, the arrival angle cannot be estimated below 5 in case of signal correlations because the angle resolution capacity decreases accordingly. The super resolution capacity was estimated to determine the arrival angle below 5 in this paper. In addition, the proposed algorithm estimated the short delay time difference to be below 20ns.

• Journal of electromagnetic engineering and science
• /
• 제19권1호
• /
• pp.56-63
• /
• 2019

Typical negative group delay circuits (NGDC) are analyzed in terms of signal attenuation, group delay, and bandwidth using S-parameters. By inverting these formulations, we derive and present the design equations (for NGD circuit elements) for a desired specification of the two among the three parameters. The proposed design method is validated through simulation examples for narrow- and wide-band pulse inputs in the time and frequency domains. Moreover, an NGDC composed of lumped elements is fabricated at 1 GHz for measurement. As a function of frequency, the circuit-/EM-simulated and measured group delays are in good agreement. The provided simple NGDC design equations may be useful for many applications that require compensations of some signal delays.

• 한국ITS학회 논문지
• /
• 제13권1호
• /
• pp.15-25
• /
• 2014

버스우선신호는 도로상에서 버스에 물리적, 운영적 통행우선권을 부여하는 방법으로 신호 교차로에서 버스의 정시성 및 신속성, 서비스 개선을 통해 승객의 수송 효율과 도로 교통의 수송 용량을 높일 수 있는 대중교통 우선정책 기법이다. 본 연구에서는 결정적 지체모형의 하나인 HCM모형을 이용하여 중앙버스전용차로가 존재하는 독립교차로에서 능동형 버스우선신호 제공 방법론을 제시하였다. 능동형 버스우선신호의 기법 중 Early green과 Green extension 기법을 이용하여 버스가 이용하지 않는 비우선현시의 여유녹색시간을 버스가 이용하는 우선현시에 재분배하는 버스우선신호 방법론을 제시하였다. 또한, 이 방법론을 통하여 비우선현시의 여유녹색시간을 우선현시에 재분배 하였을 때 차량당 지체 및 사람당 지체가 어떻게 변화하는지에 대하여 분석하고 여유녹색시간의 민감도 분석을 통해 여유녹색시간이 정확한 값인지 알아보았다. 그 결과 교차로 전체의 차량당 지체는 다소 증가하고 사람당 지체는 감소하는 것으로 나타났다. 또한, 민감도 분석결과 여유녹색시간의 변화가 30%미만일 경우 지체의 큰 차이는 없었으나 30%이상일 경우 버스우선신호의 효과가 떨어지는 것으로 분석 되었다.

• 전자공학회논문지A
• /
• 제29A권2호
• /
• pp.33-40
• /
• 1992

The design method of signal delay line system using indirect frequency synthesizer is presented. The variable signal delay line system with 2[nsec] step of delay time at center frequency 60[MHz], bandwidth 500[KHz] and range 5.24-5.81[x10S0-6Tsec] is designed and fabricated. The results were met with good characteristics to be variable delay time of average 2.01[nsec] per step.

• 한국전자파학회논문지
• /
• 제15권3호
• /
• pp.265-270
• /
• 2004

본 논문에서는 group delay가 위성 통신 시스템에 미치는 영향을 분석한다. 일정한 상수가 아닌 group delay에서는 신호의 위상 왜곡이 발생한다. Group delay는 특성에 따라 linear, parabolic, cubic으로 모델링할 수 있다. 각각의 group delay 특성을 위성통신 시스템에 적용하여 BER(bit error rate)을 분석한다. Group delay는 신호의 대역폭이 커질수록 신호에 미치는 영향이 커지는 특성을 갖고 있으며, 위성 통신 시스템의 정보 전송속도가 1Mbps, 4Mbps, 8Mbps 의 세 가지인 경우에 대하여 BER을 분석한다. 이때 channel coding으로는 구속장이 7이고, code rate 1/2인 convolution coding과 7/8 punctured convolution coding 를 이용한다. BER = $10^{-5}$을 만족하는 요구 SNR을 관찰하였을 때, group delay의 영향을 받는 데이터는 group delay의 영향을 받지 않은 데이터에 비해 요구 SNR은 최소 0.3㏈에서 최대 4.4㏈으로 증가한다. 이들 중 group delay에 의한 영향이 가장 큰 경우는 group delay의 특성이 linear 특성이고 channel coding이 7/8 puncture convolution coding, 전송속도가 8 Mbps인 경우로서 이때 요구 SNR은 4.4㏈증가한다.

• 한국소음진동공학회논문집
• /
• 제18권8호
• /
• pp.823-831
• /
• 2008

Since it needs the light computational load and small database, sound source localization method using time delay of arrival(TDOA method) is applied at many research fields such as a robot auditory system, teleconferencing and so on. Researches for time delay estimation, which is the most important thing of TDOA method, had been studied broadly. However studies about factors for time delay estimation are insufficient, especially in case of real environment application. In 1997, Brandstein and Silverman announced that performance of time delay estimation deteriorates as reverberant time of room increases. Even though reverberant time of room is same, performance of estimation is different as the specific part of signals. In order to know that reason, we studied and analyzed the factors for time delay estimation using speech signal and room impulse response. In result, we can know that performance of time delay estimation is changed by different R/D ratio and signal characteristics in spite of same reverberant time. Also, we define the performance index(PI) to show a similar tendency to R/D ratio, and propose the method to improve the performance of time delay estimation with PI.

• 한국군사과학기술학회지
• /
• 제19권5호
• /
• pp.582-589
• /
• 2016

Multi-mode monopulse system is widely used for satellite terminal like UAV because of high tracking accuracy and low size/weight profile. In order to calculate tracking error, Multi-mode monopulse system utilizes high-order mode signal, and it should have enough C/N(carrier to noise) level therefore tracking system needs narrow band filtering of received satellite beacon signal as much as possible. However, UAV suffers for beacon frequency drift derived from Doppler effect due to satellite figure 8 movement and UAV maneuvering. Therefore wideband signal processing needs to be considered in advance for exact doppler compensation and consequent time delay. In this paper, we propose the multi-stage Digital Signal processing system for beacon signal, which could minimize the signal delay under high Doppler and low C/N condition.

• 한국도로학회논문집
• /
• 제15권5호
• /
• pp.217-226
• /
• 2013

PURPOSES : Under the capacity conditions with balanced approach flows, roundabouts give less delay than existing signalized intersections; however, flows over 450 vehicles/hour/lane with unbalanced approach flow conditions, roundabouts efficiency drops due to the short time difference between the critical gap and the follow-up headway. The purpose of this study is developing a roundabout Signal Metering operation method by considering approach lanes degree of saturation. METHODS : A four-way-approach with one-lane roundabout is selected to compare the Signal Metering performance for the case of 16 different unbalanced flow conditions. Based on these traffic conditions, the performance is evaluated for 64 different cases of Signal Metering combinations by using SIDRA software. A degree of saturation(V/C ratio) sum for two adjoined approaches is used for the performance index of choosing Metered Approach and Controlling Approach. RESULTS : When the V/C ratio sum is 0.29~0.81 and Metered Approach flow is less than Controlling Approach flow, the average delay saving per vehicle is about 7 seconds; however, after this rage the delay saving decreases gradually until the V/C ratio sum reaches around 1.0. The range of V/C ratio sum 0.93~1.09 provides average delay saving per vehicle about 3 seconds. In case of V/C ratio sum is grater than 1.0 and the flows of Metered Approach is grater than Controlling Approach, the average delay per vehicle increases 3~11 times respectively. CONCLUSIONS : As expected, the Signal Metering provides substantial improvements in delay saving for the case of V/C ratio sum is 0.3~1.0 under the traffic flow conditions of Metered Approach is less than Controlling Approach.