• Journal of Power Electronics
• /
• 제15권6호
• /
• pp.1456-1467
• /
• 2015

This paper presents a novel close-loop control scheme based on small signal modeling and weighted composite voltage feedback for a three-phase input and single-phase output Matrix Converter (3-1MC). A small non-polar capacitor is employed as the decoupling unit. The composite voltage weighted by the load voltage and the decoupling unit voltage is used as the feedback value for the voltage controller. Together with the current loop, the dual-loop control is implemented in the 3-1MC. In this paper, the weighted composite voltage expression is derived based on the sinusoidal pulse-width modulation (SPWM) strategy. The switch functions of the 3-1MC are deduced, and the average signal model and small signal model are built. Furthermore, the stability and dynamic performance of the 3-1MC are studied, and simulation and experiment studies are executed. The results show that the control method is effective and feasible. They also show that the design is reasonable and that the operating performance of the 3-1MC is good.

• 대한의용생체공학회:학술대회논문집
• /
• 대한의용생체공학회 1994년도 춘계학술대회
• /
• pp.49-52
• /
• 1994

We have developed a biological signal measurement, archiving, and communication system (SiMACS). The front end of the system is the intelligent data processing unit (IDPU) which includes ECG, EEG, EMG, blood pressure, respiration, temperature measurement modules, module control and data acquisition unit, real-time display and signal processing unit. IDPUS are connected to central data base unit through LAN(Ethernet). Workstations which receive signals from central DB and provide various signal analysis tools are also connected to the network. The developed PC-based SiMACS is described.

• 한국ITS학회 논문지
• /
• 제9권5호
• /
• pp.49-58
• /
• 2010

현재 국내에서 사용되는 교통신호제어기는 4구신호등(적색, 황색, 녹화살표, 녹색) 체계로 개발된 "경찰청 교통신호제어기 표준규격"을 따르고 있으나, 국가정책에 따라 3구신호등체계로 바뀌어 운영될 예정에 있다. 이에 따라 본 연구에서는 기존 4구신호등 체계로 개발된 표준규격 교통신호제어기를 3구신호등(적색, 황색, 녹색) 체계에 맞도록 신호등기부를 개선하는 방법으로 3구신호등용 교통신호제어기를 설계 개발하였다. 등기구동장치(LSU)는 2조의 3색 R-Y-G 출력스위치를 가져 총 6개의 출력용량을 갖도록 개선되었다. 이동류별 및 교통수단별(차량, 버스, 자전거, 보행) 3색 신호를 부여하기 위해 최대 16개까지 등기구동장치(LSU)를 수용하여 총 96개의 출력 용량을 갖도록 버스체계가 개선되었다. 최대 32개까지 늘어난 적색 등 점멸제어를 위해 점멸기(FLASHER) 장치를 개선하였다. 소프트웨어 부문에서는 지역제어기와 센터시스템 간 통신규약이 개선 되었으며, 3구신호등 체계의 LSU에 적합한 새로운 시그널맵 코드체계를 부여하였다. 개발된 3구신호등 제어용 교통신호기에 대해 프로토콜 운전, 원격제어기능, 제어모드별 운전기능을 각각 시험하였으며, 테스트 결과 모두 정상적으로 동작하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 D
• /
• pp.2561-2563
• /
• 2001

This research is about the remote control of the infra-ray signal producer and the received signal memory-type control unit. Also by using the infra-ray signal from the remote control, reduction of malfunctions due to infra-ray signal from other devices are presented. Applications on various electric and electronic items to improve the convenience are also shown.

• 한국ITS학회 논문지
• /
• 제8권5호
• /
• pp.57-70
• /
• 2009

교통여건의 변화로 좌 우회전, 중앙버스 및 자전거 전용신호에 대한 요구가 증대되고 있다. 그러나 현재 운영되고 있는 표준규격 교통신호제어기는 4색등화기를 기반으로 하고 있어, 3색등화기의 방향별 차종별 전용신호를 운영하는 데 제약이 있다. 따라서 본 연구는 기존 표준 교통신호제어기에서 좌 우회전 및 중앙버스의 전용신호를 제어할 수 있는 물리적 소프트웨어적인 방안을 제시하였다. 물리적으로 보행 적, 보행 녹, 적, 황, 화살표 및 녹색등화의 6개 출력단자로 설계된 4색등화기의 신호등구동장치(LSU)를 적, 황, 녹색의 3개 씩 2단 배열로 그룹화 하여, 3색등화기의 전용신호로 사용하는 방안을 제시하였다. 소프트웨어적으로 신호 맵 데이터의 코드값을 3색등화기의 적1 황1 녹1 적2 황2 녹색2의 LSU 출력에 맞게 설정하여, 링별(A/B링) LSU별로 전용신호를 스텝별로 구동하는 방안을 제안하였다. 전용신호 도입 시의 운영효과를 중앙버스전용차로가 운영되고, 좌회전이 허용되는 서울시 망우역교차로를 대상으로 분석한 결과 버스전용차로가 운영되고 있는 주도로(동-서)에서 지체가 크게 개선되어 교차로 전체의 지체시간이 70초/대 이상 개선되는 것으로 분석되었다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 하계종합학술대회 논문집(2)
• /
• pp.97-100
• /
• 2001

A 3-way VLIW multimedia signal processor capable of efficient repeated operations as well as both load/store and type transformations for various data types is presented. It is composed of a 32-bit execution unit that can execute two instructions in parallel, an independent load/store unit and a control unit. The processor is implemented with 0.6${\mu}{\textrm}{m}$ gate array and the results are discussed.

• Journal of Positioning, Navigation, and Timing
• /
• 제9권4호
• /
• pp.379-385
• /
• 2020

The satellite employs an adaptive beamformer to efficiently detect various signals and to suppress multiple interference signals, simultaneously. Although the adaptive beamforming satellite system needs Angle-of-Arrival (AOA) information of the desired signal, it is difficult to estimate the signal AOAs on the satellite environment. However, the AOA estimation on the ground control tower is more efficient and accurate comparing to the satellite environment. In this paper, we propose an adaptive beamforming satellite system based on the signal location information on the ground, consisting on an angle estimator, an adaptive beamformer, and signal processing & D/B unit. The ground control tower estimates the accurate location of the signal source, and it sends the estimated coordinates of the desired signal to the satellite. The angle estimator mounted on the satellite calculates the desired signal AOA, based on the signal location information transmitted from the ground control center. The satellite beamformer detects the desired signal and suppresses unwanted signals based on the signal AOA calculated by the angle estimator. We provide computer simulation results to present the performance of the proposed satellite adaptive beamforming system based on the signal location information.

• 한국정밀공학회지
• /
• 제33권6호
• /
• pp.517-523
• /
• 2016

Unlike household refrigerators, commercial refrigerators are composed of separate indoor and outdoor units. The outdoor unit of most commercial refrigerators is designed to run at a fixed speed, which results in low energy efficiency and loud fan noise. Moreover, it cannot respond flexibly to changing thermal load in the indoor unit. Inverter type outdoor units can address such problems through speed changes based on information obtained from the indoor unit. However, using two units from different manufacturers is often not a viable solution. If condition changes in the indoor unit can be detected without communication between the two units, it is possible to adjust the speed of the outdoor unit. This paper attempts to analyze the signal from the outdoor unit when the condition of the indoor unit changes by varying the thermal load.

• Journal of Power Electronics
• /
• 제8권2호
• /
• pp.121-130
• /
• 2008

This paper introduces a design and implementation of a digital control unit for an Oxygenaire Servo Baby Incubator. The control unit is designed and implemented according to international standards. The control unit is based on an AVR Atmel microcontroller unit. It is built for monitoring and control and displays the three main temperature values: set point temperature, baby skin temperature and air temperature. User friendly software is implemented. The implemented control unit was tested in the laboratory as well as in the field. The control unit is sensitive to change of $0.1^{\circ}C$. At startup, based on a unique control strategy, the incubator reaches its steady state in about 14 minutes. The system schematic diagrams are shown in the paper. Also, programs flow charts are presented. The control unit was designed and implemented based on a contract between the Electronics Research Institute (ERI) and ENGIMED Company. The authors would like to thank ERI and ENGIMED for introducing all required finance and shoring to complete this work.

• 소음진동
• /
• 제6권2호
• /
• pp.205-214
• /
• 1996

Active noise control(ANC) requires the full capability of a modern digital signal processing module. This paper describes the digital signal processing unit which is designed for ANC of noise fields in passenger car. System hardware is designed to allow software controlled versatility as well as fully qutomatic operation. The developed system is provided with the ability to be self-operated except the case of upload/download of data and program between the personal computer and the system memory. Experimental results are presented to demonstrate ANC performance of noise fields in lightly damped enclosure and passenger car.