• IEIE Transactions on Smart Processing and Computing
• /
• 제5권1호
• /
• pp.29-34
• /
• 2016

A controller area network (CAN) controller is an integral part of an electronic control unit, particularly in an advanced driver assistance system application, and its characteristics should always be advantageous in all aspects of functionality especially in real time application. The cost should be low, while maintaining the functionality and reliability of the technology. However, a CAN protocol implementing serial operation results in slow throughput, especially in a cyclical redundancy checking (CRC) unit. In this paper, digital signal processing (DSP) algorithms are implemented, namely pipelining, unfolding, and retiming the CAN controller in the CRC unit, particularly for the encoder and decoder sections. It must attain a feasible iteration bound, a critical path that is appropriate for a CAN system, and must obtain a superior design of a high-speed parallel circuit for the CRC unit in order to have a faster transmission rate. The source code for the encoder and decoder was formulated in the Verilog hardware description language.

• 한국인터넷방송통신학회논문지
• /
• 제21권4호
• /
• pp.43-49
• /
• 2021

소형 적외선영상 호밍시스템은 지상의 표적에 대하여 주야간 적외선 영상처리를 통하여 표적을 식별하고 주요 표적에 대하여 표적을 탐색, 탐지하여 추적하는 적외선 영상센서를 보유한 추적시스템이다. 본 논문에서는 지상의 표적을 주야간 적외선 영상을 통하여 표적 정보를 획득하여 실시간 영상처리를 통하여 표적을 식별하기 위한 고속의 CPU와 FPGA(Field Programmable Gate Array)가 탑재된 보드 개발의 내용을 설명한다. CPU, FPGA 선정과 영상신호처리를 위한 CPU-FPGA 결합 아키텍처에 대하여 제안하고 또한 김발구조의 적외선센서를 제어하기 위한 FPGA를 활용에 대하여 설명한다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.682-685
• /
• 2004

This paper investigated a method for classifying emotional states by using pulse wave signal. It focused on finding effective features for emotional state classification. The emptional states considered here consisted of interest and neutral. Classification experiments utilized 65 and 60 samples of interest and neutral states respectively. We have investigated 19 features derived from pulse wave signals by using both time domain and frequency domain analysis methods with 2 classifiers of minimum distance (normalized Euclidean distanece) and ${\kappa}$-Nearest Neighbour. The Leave-one-out cross validation was used as an evaluation mehtod. Based on experimental results, the most efficient features were a combination of 4 features consisting of (i) the mean of the first differences of the smoothed pulse rate time series signal, (ii) the mean of absolute values of the second differences of thel normalized interbeat intervals, (iii) the root mean square successive difference, and (iv) the power in high frequency range in normalized unit, which provided 80.8% average accuracy with ${\kappa}$-Nearest Neighbour classifier.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2010년도 춘계학술대회 논문집
• /
• pp.1075-1080
• /
• 2010

There have been lots of researches for High Performance Digital Signal Processing performance enhancement on a GPU(Graphic Processor Unit). These kinds of parallelizing can enable massive signal processing, so we can have advantage's of processing various of signal processing standards with GPU. In this paper we introduce Low Density Parity Check(LDPC) which is one of the Foward Error Correction(FEC). And we have achieved computational time reduce by using CUDA as a parallelizing scheme.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2004년도 추계학술대회 논문집
• /
• pp.1461-1466
• /
• 2004

Recently Domestic EMU's on board signal systems are gradually changed form Cab signal(Fix Block) to Distance-to-go. Interfaces with on board signal system, TCMS Redundancy structure is mainly required. This paper suggest Manaul/Automatic Driving based on TCMS-ATC interface and design of backup system which is operated by Stan-by Computer when one of it's Local Interface Unit(LIU) is out of oder. For the purpose of Precision Train Stop, Distance-to-go signal system require accuracy speed. Free-axle structure is required for this system This paper suggest Free-axle braking system that lack of brake-force is compensated by the distributed brake-force using TCMS. And one of braking system has out of order, compensation of brake-force for Free-axle system. Then we prove our design to Complete Car Test

• 전자공학회논문지 IE
• /
• 제43권3호
• /
• pp.34-40
• /
• 2006

일반적으로 유체나 연료 공급 장치는 모터를 제어하기 위한 특별한 센서가 필요하고, 센서를 부착하기 위한 보조 장치와 부착하기 위한 공간이 필요하다. 또한 신호선 및 기타 배선 등이 필요하여 어려운 점이 따르게 된다. 본 논문에서는, 불편함과 문제점을 해결하기 위하여 홀센서를 이용한 제어시스템을 제안하였고, 시스템의 제어원리는 모터 동작 단계에 따라 전류흐름에 차이가 발생한다는 것을 이용하였다. 또한 제어 시스템이 우수할 뿐만 아니라 센서 설치에 따른 고장을 줄일 수 있었고, 재료비 및 인건비를 절감할 수 있다. Auto-Pumping 시스템은 Soft-Ware적응용을 통해 모든 유체 공급 시스템에 적용할 수 있으며, 차후에 시스템을 이용한 여러 종류의 장치를 개발할 수 있으리라 본다.

• 대한의용생체공학회:학술대회논문집
• /
• 대한의용생체공학회 1991년도 춘계학술대회
• /
• pp.89-93
• /
• 1991

The purpose of this reserch is to design the blood cell counting instrument which can measure the number of RBC(Red Blood Cell) and WBC(White Blood Cell) including many other blood component. The proposed method uses the electrical impedence method and the new discrimination method wi th DSP chip and software algorithm. The system consist of control unit, blood cell discrimination unit, hemoglobin spectrometer, post detect ion processor unit, and IBM-PC interface unit. In this paper, the discrimination system has been implemented using digital signal processor, which result in the reduction of system hardware and cost. The system is helpful in providing necessary clinical test for screen test and quality control of hematology.

• 제어로봇시스템학회논문지
• /
• 제11권1호
• /
• pp.84-91
• /
• 2005

In this paper, we describe the real-time parallel processing simulator developed for the use of performance analysis of rolling missiles. The real-time parallel processing simulator developed here consists of seeker emulator generating infrared image signal on aircraft, real-time computer, host computer, system unit, and actual equipments such as auto-pilot processor and seeker processor. Software is developed from mathematic models, 6 degree-of-freedom module, aerodynamic module which are resided in real-time computer, and graphic user interface program resided in host computer. The real-time computer consists of six TIC-40 processors connected in parallel. The seeker emulator is designed by using analog circuits coupled with mechanical equipments. The system unit provides interface function to match impedance between the components and processes very small electrical signals. Also real launch unit of missiles is interfaced to simulator through system unit. In order to apply the real-time parallel processing simulator to performance analysis equipment of rolling missiles it is essential to perform the performance verification test of simulator.

• 한국정보기술응용학회:학술대회논문집
• /
• 한국정보기술응용학회 2005년도 6th 2005 International Conference on Computers, Communications and System
• /
• pp.339-342
• /
• 2005

In order to support ultrawide-band signal generation for low rate WPAN, several types of signal generation mechanisms are suggested such as Chaos, Impluse, and Chirp signals by the activity of IEEE 802.15.4a. The communication system applied chaos theory may have ultrawide-band characteristics with spread spectrum and immunity from multipath effect. In order to use the advantage of chaotic signal generation, we introduce the system implementation of communication and networking systems with the chaos UWB signal. This system may be composed of mainly three parts in hardware architecture : RF transmission with chaotic signal generation, signal receiver using amplifiers and filters, and 8051 & FPGA unit. The most difficult part is to implement the chaotic signal generator and build transceiver with it. The implementation of the system is devidced into two parts i.e. RF blocks and digital blocks with amplifiers, filters, ADC, 8051 processor, and FPGA. In this paper, we introduce the system block diagram for chaotic communications. Mainly the RF block is important for the system to have good performance based on the chaotic signal generator. And the main control board functions for controlling RF blocks, processing Tx and Rx data, and networking in MAC layer.

• 융합신호처리학회논문지
• /
• 제16권2호
• /
• pp.56-62
• /
• 2015

본 연구에서는 현대인들의 일상생활 중 대부분의 시간을 보내는 좌식생활 중에 무구속적으로 장시간 심장활동상태를 모니터링하기 위한 의자형 무구속 심전도 모니터링 시스템을 설계 및 구현하였다. 구현된 시스템은 옷을 입은 상태에서도 측정이 가능하며, 동잡음에도 비교적 강한 장점을 가진다. 이를 위하여 의자의 등받이 부분에 무구속 전극을 배치하였으며, 미세한 생체신호를 증폭하고, 측정 시 발생 할 수 있는 동잡음 및 기저선의 변화, 상용전원에 의한 전원잡음을 제거하기 위하여 증폭기 및 필터를 설계하였다. 또한 제어부와 무선전송부를 구현하여 아날로그 신호를 디지털 신호로 변환하고 생체신호를 PC와 스마트폰으로 전송함으로써 일상생활 중 지속적인 심장활동 상태의 모니터링이 가능하다. 구현된 시스템의 성능을 평가하기 위하여 Ag/AgCl 전극을 사용한 시스템과 비교 실험을 수행하였으며, 실험 결과 구현된 시스템의 무구속적으로 심장활동 상태 모니터링이 가능함을 확인하였다.