• 대한수학회지
• /
• 제55권4호
• /
• pp.1005-1018
• /
• 2018

Let ${\Sigma}_{g,n,b}$ denote the orientable surface obtained from the closed orientable surface ${\Sigma}_g$ of genus $g{\geq}2$ by deleting the interior of $n{\geq}1$ distinct topological disks and $b{\geq}1$ points. Using the notion of symplectic chain complex, the present paper establishes a formula for computing Reidemeister torsion of the surface ${\Sigma}_{g,n,b}$ in terms of Reidemeister torsion of the closed surface ${\Sigma}_g$, Reidemeister torsion of disk, and Reidemeister torsion of punctured disk.

• Kyungpook Mathematical Journal
• /
• 제59권3호
• /
• pp.377-389
• /
• 2019

We evaluate the convolution sum $W_{a,b}(n):=\sum_{al+bm=n}{\sigma}(l){\sigma}(m)$ for (a, b) = (1, 28),(4, 7),(2, 7) for all positive integers n. We use a modular form approach. We also re-evaluate the known sums $W_{1,14}(n)$ and $W_{1,7}(n)$ with our method. We then use these evaluations to determine the number of representations of n by the octonary quadratic form $x^2_1+x^2_2+x^2_3+x^2_4+7(x^2_5+x^2_6+x^2_7+x^2_8)$. Finally we express the modular forms ${\Delta}_{4,7}(z)$, ${\Delta}_{4,14,1}(z)$ and ${\Delta}_{4,14,2}(z)$ (given in [10, 14]) as linear combinations of eta quotients.

• Bulletin of the Korean Chemical Society
• /
• 제15권5호
• /
• pp.353-356
• /
• 1994

The $CN(B^2{\Sigma}^+)$ radical was produced in a jet using an electric dc discharge of the precursor $CH_3CN$ with inert carrier gases. The rotationally resolved Fourier transform emission spectra of the 0-0 band of the $(B^2{\Sigma}^+{\to}X^2{\Sigma}^+)$ transition of CN have exhibited different distribution of the intensity for the carrier gases He and Ar, respectively. From the analysis of intensity distribution in the spectra, the mechanism for rotational cooling process of CN radical in a supersonic expansion has been suggested.

• Bulletin of the Korean Chemical Society
• /
• 제16권5호
• /
• pp.449-453
• /
• 1995

An exact quantum mechanical theory is employed to treat predissociation process of the $A^2{\Sigma}^+$ state of OH. The widths and positions of the lower (v= 2 and v= 3) rovibrational levels are calculated. Energy shifts of the resonances from the zeroth order (pure Hund'scase (b)) positions are shown to be small for N $\leq$ 10, indicating that the $A^2{\Sigma}^+$ state can be described as case (b) very well for low N. Due to the differential interactions of the $A^2{\Sigma}^+_{1/2}$ and $A^2{\Sigma}^+_{-1/2}$ states with $X^2II$and $2^2II$ states, small splittings between the $F_1$ and $F_2$ levels are predicted. Calculated lifetimes of the resonances agree with experimental results reasonably well.

• 대한화학회지
• /
• 제7권3호
• /
• pp.211-215
• /
• 1963

Inter-relationship between the Hammett equation and the linear enthalpy-entropy effect has been discussed by deriving a new set of equations; ${\Delta}{\Delata}H^{\neq}=a{\sigma}+b{\Delta}{\Delta}S^{\neq}$ and ${\Delta}{\Delta}F^{\neq}=a{sigma}+(b-T){\Delta}{\Delta}S^{\neq}$ where a = -1.36p. Theoretical analysis show that the Hammett, Leffler and Brown equations are special limited forms of these general equations. A necessary and sufficient test of substituent effect can thus be provided by the plot of $({\Delta}{\Delta}H^{\neq}-a{\sigma)$ versus ${\Delta}{\Delta}S^{\neq}$.

• 산업기술연구
• /
• 제4권
• /
• pp.29-35
• /
• 1984

Buckling is a significant behavior to be considered whenever we design steel structures. In the case of H-shape beams, the lateral buckling occured by bending moment must be considered. Because of the lateral buckling of H-shape beams, the bending strength of the beams are determined by the lateral buckling stress instead of the allowable bending stress. Lateral buckling stress equation, consisting of two terms, i. e. ${\sigma}_{cr}({\nu},{\omega})={\sqrt{[{\sigma}_{cr}({\nu})]^2+[{\sigma}_{cr}({\omega})]^2}}$ has been using, but for the practical purpose of use the following equations are using two, i. e. ${\sigma}_{cr}({\nu})={\frac{0.65E}{{\ell}_h/A_f}}$, ${\sigma}_{cr}({\omega})={\frac{{\pi}^2E}{({\ell}_b/i_b)^2}}$. When we use the above equations, the results are different according to the shape of beam section, and they a re rather complex. In this study lateral buckling stress equation is derived, and the proposed formula$({\sigma}_{cr}(t))$ is compared with above mentioned two basic and practical equations. To verify the proposed formula experimentaly, 16H-shape beams which have different slender ratios arc tested by applying pure bending momet. Through the experiments the buckling behavior of H-shape beams is clarified, and the results shows that the proposed formula$({\sigma}_{cr}(t))$ is accurate enough for practical purpose.

• Geomechanics and Engineering
• /
• 제11권5호
• /
• pp.639-655
• /
• 2016

The effect of particle breakage and intermediate principal stress ratio on the behaviour of crushable granular assemblies under true triaxial stress conditions is studied using the discrete element method. Numerical results show that the increase of intermediate principal stress ratio $b(b=({\sigma}_2-{\sigma}_3)/({\sigma}_1-{\sigma}_3))$ results in the increase of dilatancy at low confining pressures but the decrease of dilatancy at high confining pressures, which stems from the distinct increasing compaction caused by breakage with b. The influence of b on the evolution of the peak apparent friction angle is also weakened by particle breakage. For low relative breakage, the relationship between the peak apparent friction angle and b is close to the Lade-Duncan failure model, whereas it conforms to the Matsuoka-Nakai failure model for high relative breakage. In addition, the increasing tendency of relative breakage, calculated based on a fractal particle size distribution with the fractal dimension being 2.5, declines with the increasing confining pressure and axial strain, which implies the existence of an ultimate graduation. Finally, the relationship between particle breakage and plastic work is found to conform to a unique hyperbolic correlation regardless of the test conditions.

• 대한임상검사과학회지
• /
• 제36권2호
• /
• pp.121-126
• /
• 2004

The primary goal of six sigma is to improve patient satisfaction, and thereby profitability, by reducing and eliminating defects. Defects may be related to any aspect of customer satisfaction: high product quality, schedule adherence, cost minimization, process capability indices, defects per unit, and yield. Many six sigma metrics can be mathematically related to the others. Literally, six means six standard deviations from the mean or median value. As applied to quality metrics, the term indicates that failures are at least six standard deviations from the mean or norm. This would mean about 3.4 failures per million opportunities for failure. The objective of six sigma quality is to reduce process output variation so that on a long term basis, which is the customer's aggregate experience with our process over time, this will result in no more than 3.4 defect Parts Per Million(PPM) opportunities (or 3.4 Defects Per Million Opportunities. For a process with only one specification limit (upper or lower), this results in six process standard deviations between the mean of the process and the customer's specification limit (hence, 6 Sigma). The results of applicative six sigma experiment studied on 18 items TP, ALB, T.B, ALP, AST, ALT, CL, CK, LD, K, Na, CRE, BUN, T.C, GLU, AML, CA tests in clinical chemistry were follows. Assessment of process performance fits within six sigma tolerance limits were TP, ALB, T.B, ALP, AST, ALT, CL, CK, LD, K, Na, CRE, BUN, T.C, GLU, AML, CA with 72.2%, items that fit within five sigma limits were total bilirubin, chloride and sodium were 3 sigma. We were sure that the goal of six sigma would reduce test variation in the process.

• 충청수학회지
• /
• 제22권1호
• /
• pp.89-99
• /
• 2009

Let $\mu$ be a finite positive Borel measure on the unit ball $B{\subset}\mathbb{C}^n$ and $\nu$ be the Euclidean volume measure such that ${\nu}(B)=1$. For the unit sphere $S=\{z:{\mid}z{\mid}=1\}$, $\sigma$ is the rotation-invariant measure on S such that ${\sigma}(S)=1$. Let $\mathcal{P}[f]$ be the invariant Poisson integral of f. We will show that there is a constant M > 0 such that $\int_B{\mid}{\mathcal{P}}[f](z){\mid}^{p}d{\mu}(z){\leq}M\;{\int}_B{\mid}{\mathcal{P}}[f](z)^pd{\nu}(z)$ for all $f{\in}L^p({\sigma})$ if and only if ${\parallel}{\mu}{\parallel_r}\;=\;sup_{z{\in}B}\;\frac{\mu(E(z,r))}{\nu(E(z,r))}\;<\;\infty$.

• 한국미생물·생명공학회지
• /
• 제19권6호
• /
• pp.553-560
• /
• 1991

Bacillus circulans로부터 mitomycin C처리에 의해 유발되는 Bacteriophage Sigma FA1을 서당밀도균배 원심법 (sucrose gradient centrifugation)에 의해 분리, 정제하였다. Sigma FA1의 감수성숙주에 대한 치사작용은 single-hit 방식이었다. 한편, 세포에 감여된 후 phage DNA는 천천히 분해되기 시작했으며, 본 연구의 결과는 Sigma FA1의 세포에 대한 치사작용이 기존의 것과는 다른 것임을 입증시켰으며, 이는 단 백질분해기능에서 유래되는 듯 했다.