• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.36 no.4
• /
• pp.267-273
• /
• 2000

The tooth selectivity of the dredge for catching venus clam (Gomphina melanaegis) was described in which the teeth penetrated the bottom and lifted the shell into the bag. Some factors affecting the selection action of the teeth of the dredge were analyzed related to shell length and shell height. The retention probability of venus clam not sifting through the gaps between the teeth was calculated for various shell lengths and was fitted to two parameter logistic selection curve. The formula obtained is as follows: $P= \frac{1}{1+exp[8.24](\frac{d}{L_1}-0.649)}$, where d is distance between teeth and $L_1$ is a shell length. For biological minimum size(25mm) of venus clam to be catchability 50% the distance between teeth was estimated 16.2mm from the logistic curve. Therefore it is desirable to extend that current spacing between teeth from 12mm to 16mm for the venus clam dredge. That space increasing enables fuel oil of vessel to drag a dredge to be reduced and also man power to sift through sifter smaller venus clams on boards to be reduced.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.2
• /
• pp.279-286
• /
• 2015

EMD is a fully data-driven signal processing method without using any predetermined basis function and requiring any user parameters setting. However EMD experiences a problem of mode mixing which interferes with decomposing the signal into similar oscillations within a mode. To overcome the problem, EEMD method was introduced. The algorithm performs the EMD method over an ensemble of the signal added independent identically distributed white noise of the same standard deviation. Even so EEMD created problems when the decomposition is complete. The ensemble of different signal with added noise may produce different number of modes and the reconstructed signal includes residual noise. This paper propose an modified EEMD method to overcome mode mixing of EMD, to provide an exact reconstruction of the original signal, and to separate modes with lower cost than EEMD's. The experimental results show that the proposed method provides a better separation of the modes with less number of sifting iterations, costs 20.87% for a complete decomposition of the signal and demonstrates superior performance in the signal reconstruction, compared with EEMD.

• Journal of Korean Society of Rural Planning
• /
• v.27 no.3
• /
• pp.69-84
• /
• 2021

This study aims to understand the concept of 'ruralism' in Korea by comparing with 'rurality' which were dealt with in various fields related to rural areas in Korea. This study conducted a systematic literature review as a methodology. The process is defining key questions, searching for documents, classifying documents, extracting data, and presenting results. The key questions were set to 'How has the term 'ruralism' been used in various studies?' and 'How can the concept of rurality in Korea be organized?' according to the purpose of the study. The study retrieved literature by searching on Korean academic database, RISS and DBpia, using the five keywords '농촌성', '농촌다움', '농촌다운', 'Rurality,' and 'Ruralism.' The search yielded 1,014 documents which were thereafter screened by systematic literature review process. After sifting, only 31 publications were found suitable for inclusion in the final analysis. This study organized them into four categories: rural concept, rural landscape, rural tourism, and rural development. The literature divided into four types. Type I is a study that deals only with economy·society among studies related to rurality, Type II is a study that deals with both the economic·social and physical environment, Type III is a study that deals with the physical environment of a rural area and presents the rural planning principle as maintenance and preservation. Finally, Type IV is a study that presents ruralism as a new rural planning principle for a future rural area. In the end, the study discussed some implications on defining ruralism in Korea.

• Bulletin of the Korean Chemical Society
• /
• v.32 no.9
• /
• pp.3295-3305
• /
• 2011

Thermal behavior of poly (methyl methacrylate) was analyzed in the presence of tin (IV) chloride. Five different proportions - polymer to additive - were selected for casting films from common solvent. TG, DTG and DTA were employed to monitor thermal degradation of the systems. IR and py-GC-MS helped identify the decomposition products. The blends start degrading at a temperature lower than that of the neat polymer and higher than that of the pure additive. Complex formation between tin of additive and carbonyl oxygen (pendent groups of MMA units) was noticed in the films soon after the mixing of the components in the blends. The samples were also heated at three different temperatures to determine the composition of residues left after the expulsion of volatiles. The polymer, blends and additive exhibited a one step, two-step and three-step degradation, respectively. $T_0$ is highest for the polymer, lowest for the additive and is either $60^{\circ}C$ or $70^{\circ}C$ for the blends. The amount of residue increases down the series [moving from blend-1 (minimum additive concentration) to blend-5 (maximum additive concentration)]. For blend-1, it is 7% of the original mass whereas it is 16% for blend-5. $T_{max}$ also goes up as the concentration of additive in the blends is elevated. The complexation appears to be the cause of observed stabilization. Some new products of degradation were noted apart from those reported earlier. These included methanol, isobutyric acid, acid chloride, etc. Molecular-level mixing of the constituents and "positioning effect" of the additive may have brought about the formation of new compounds. Routes are proposed for the appearance of these substances. Horizontal burning tests were also conducted on polymer and blends and the results are discussed. Activation energies and reaction orders were calculated. Activation energy is highest for the polymer, i.e., 138.9 Kcal/mol while the range for blends is from 51 to 39 Kcal/mol. Stability zones are highlighted for the blends. The interaction between the blended parts seems to be chemical in nature.

• Journal of Korea Water Resources Association
• /
• v.48 no.12
• /
• pp.981-993
• /
• 2015

The analysis of hydrologic time series data is crucial for the effective management of water resources. Therefore, it has been widely used for the long-term forecasting of hydrologic variables. In tradition, time series analysis has been used to predict a time series without considering exogenous variables. However, many studies using decomposition have been widely carried out with the assumption that one data series could be mixed with several frequent factors. In this study, the empirical mode decomposition method was performed for decomposing a hydrologic time series data into several components, and each component was applied to the time series models, autoregressive moving average (ARMA). After constructing the time series models, the forecasting values are added to compare the results with traditional time series model. Finally, the forecasted estimates from ARMA model with empirical mode decomposition method showed better performance than sole traditional ARMA model indicated from comparing the root mean square errors of the two methods.

• Korean Journal of Human Ecology
• /
• v.9 no.4
• /
• pp.75-81
• /
• 2006

In this study on the recipe for Yakgwa in Jeonbuk province, a survey of the ingredients, the quantity and the recipe for Yakgwa were conducted by an interview with the notable maker of it in 9 regions ; Jeonju, Imshil, Jangsu, Jeongup, Namwon(Samaemyeon & Dukgwamyeon), Wanju, Gochang, Iksan, away from each other. The hardness testing and the sensory evaluation of Yakgwa were carried out to compare with the control group and Jeonbuk Yakgwa. The results of this study are as follows ; 1. Common ingredients of Yakgwa examined in 9 regions were flour, sesame oil or soybean oil, honey or sugar, ginger juice, alcoholic drinks and etc. The quantity of oil (sesame or soybean) per kilogram of flour was as follows between one-half and one cup of oil, between one and three cups of honey or sugar, between one-half and one cup of ginger juice and between one-half and one cup of alcoholic drinks. Making of Yakgwa in Jeonju and Imshil area, knead flour with the liquid ingredients which are mixed together before. In other areas, after sifting the mixed flour with sesame oil, and then knead the remaining with the sifted. 2. The result of the hardness testing of Yakgwa was that it is higher in this order, Iksan, Imshil, the control group, Jeongup, Jeonju. With while the difference of syrup used in each of them, the result of hardness testing in the same order shows that the component of Yakgwa has more great effect on the hardness than a kind of syrup on which the result by using syrup before&after cooking. And in the sensory evaluation, the surface color of Iksan Yakgwa was the most bright of all, and the shininess was of Imshil and the control group, the cracked level, the softness, the sweet taste and the oily taste of Jeonju Yakgwa was better than other Also, the overall preference, though less meaningful, was same result.

• Korean Security Journal
• /
• no.41
• /
• pp.37-66
• /
• 2014

In recent years, with the development of computers and electronics, electronics and communication technology in a growing and each part is dependent on the cross-referencing makes all electronic equipment is obsolete due to direct or indirect damage EMP. Korea and the impending standoff North Korea has a considerable level of technologies related to the EMP, EMP weapons you already have or in a few years, the development of EMP weapons will complete. North Korea launched a long-range missile and conducted a nuclear test on several occasions immediately after, when I saw the high-altitude nuclear blackmail has been strengthening the outright offensive nuclear EMP attacks at any time and practical significance for the EMP will need offensive skills would improve. At this point you can predict the damage situation of Korea's security reality that satisfy the need, more than anything else to build a protective system of the EMP. The scale of the damage that unforeseen but significant military damage and socio-economic damage and fatalities when I looked into the situation which started out as a satellite communications systems and equipment to attack military and security systems and transportation, finance, national emergency system, such as the damage elsewhere. In General, there is no direct casualties reported, but EMP medical devices that rely on lethal damage to people who can show up. In addition, the State power system failure due to a power supply interruption would not have thought the damage would bring State highly dependent on domestic power generation of nuclear plants is a serious nuclear power plant accident in the event of a blackout phenomenon can lead to the plant's internal problems should see a forecast. First of all, a special expert Committee of the EMP, the demand for protective facilities and equipment and conduct an investigation, he takes fits into your budget is under strict criteria by configuring the contractors should be sifting through. He then created the Agency for verification of performance EMP protection after you have verified the performance of maintenance, maintenance, safety and security management, design and construction company organized and systematic process Guard facilities or secret communications equipment and perfect for the EMP, such as protective equipment maneuver system should take.

• Journal of Environmental Impact Assessment
• /
• v.28 no.5
• /
• pp.492-506
• /
• 2019

Heavy metal contaminants in the shooting range are mostly present in a warhead circle or a metal fragment present as a particle, these fine metal particles are weathered for a long period of time is very likely that the surface is present as an oxide or carbon oxide. In particular, lead which is a representative contaminant in the shooting range soil, is present as more fine particles because it increases the softness and is stretched well. Therefore, by physical washing experiment, we conducted a degree analysis, concentration of heavy metals by cubic diameter, composition analysis of metallic substances, and assessment of applicability of gravity, magnetism and floating selection. The experimental results FESEM analysis and the measurement results lead to the micro-balance was confirmed thatthe weight goes outless than the soil ofthe same size in a thinly sliced and side-shaped structure according to the dull characteristics it was confirmed that the high specific gravity applicability. In addition, the remediation efficiency evaluation results using a hydrocyclone applied to this showed a cumulative remediation efficiency of 71%,twice 80%, 3 times 91%. On the other hand, magnetic sifting showed a low efficiency of 17%,floating selection -35mesh (0.5mm)target soil showed a relatively high efficiency to 39% -10mesh (2mm) efficiency was only 16%. The target treatment diameter of soil washing should be 2mm to 0.075mm, which is applied to the actual equipment by adding an additional input classification, which would require management as additional installation costs and processes are constructed. As a result, it is found that the soilremediation of shooting range can be separately according to the size of the warhead. The size is larger than the gravel diameter to most 5.56mm, so it is possible to select a specific gravity using a high gravity. However, the contaminants present in the metal fragments were found to be processed by separating using a hydrocyclone of the soil washing according to the weight is less than the soil of the same particle size in a thinly fragmented structure.