• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2005년도 춘계 학술기술논문발표대회 논문집
• /
• pp.37-40
• /
• 2005

High Performance Concrete(HPC) has been widely used in high-rise building. The HPC has several benefits including high strength, high fluidity and high durability. However. spatting is susceptible to occur in HPC and HPC also tends to be deteriorated in the side of fire resistance performance at fire. This paper focuses on the analysis of the temperature history and residual compressive strength with finishing material, in order to protect HPC from sudden-high-temperature, which is one of the main reason spatting occurs. Test results show that spalling occurs in all specimens. The most serious spalling took placed in HPC covering fire enduring spray-on material, whose covering thickness is 20mm but temperature history indicates that fire enduring spray effectively protected HPC from fire for more than 2hours. In addition, residual compressive strength ratio of HPC using fire enduring paint was more than $90\%$ of original strength, thus minimizing spatting and indicating significant fire resistance performance.

• Smart Structures and Systems
• /
• 제21권1호
• /
• pp.75-97
• /
• 2018

In this paper, a novel higher-order shear deformation theory (HSDT) is proposed for the analysis of the hygro-thermo-mechanical behavior of functionally graded (FG) plates resting on elastic foundations. The developed model uses a novel kinematic by considering undetermined integral terms and only four variables are used in this model. The governing equations are deduced based on the principle of virtual work and the number of unknown functions involved is reduced to only four, which is less than the first shear deformation theory (FSDT) and others HSDTs. The Navier-type exact solutions for static analysis of simply supported FG plates subjected to hygro-thermo-mechanical loads are presented. The accuracy and efficiency of the present model is validated by comparing it with various available solutions in the literature. The influences of material properties, temperature, moisture, plate aspect ratio, side-to-thickness ratios and elastic coefficients parameters on deflections and stresses of FG plates are also investigated.

• 한국재료학회지
• /
• 제21권1호
• /
• pp.15-20
• /
• 2011

The effects of conventional rolling (CR) and differential speed rolling (DSR) on the microstructure and mechanical properties of a copper alloy sheet were investigated in detail. A copper alloy with thickness of 3 mm was rolled to a 50% reduction at ambient temperature without lubrication with a differential speed ratio of 2:1; sample was then annealed for 0.5h at various temperatures from 100 to $800^{\circ}C$. Conventional rolling, in which the rolling speed of the upper and lower rolls is identical, was performed under the same rolling conditions. The shear strain introduced by the CR showed positive values at positions on the upper roll side and negative values at positions on the lower roll side. However, the shear strain showed a zero or positive value at all positions for the samples rolled by the DSR. The microstrucure and mechanical properties of the as-rolled copper alloy did not show very significant differences between the CR and DSR for the microstructure and mechanical properties. However, those properties showed very significant differences in the case of the annealed samples. The effects of rolling method on the microstructure and mechanical properties of the as-rolled and subsequently annealed materials are discussed in terms of the shear strain.

• 대한정형도수물리치료학회지
• /
• 제24권2호
• /
• pp.51-58
• /
• 2018

Backdround: Using RUSI (Rehabilitation Ultra Sound Imiging) method, which showed high reliability in soft tissue measurements, we compared the muscle relax and contraction, sex, and physical characteristics of the activity of the multifidus muscle in patients with chronic low back pain and normal subjects. Methods: In this study, 16 patients (male: 8, female: 8) with chronic low back pain and 16 healthy adult (male: 8, female: 8) were participated. Subjects lied prone posture on the table with elbow flexed $90^{\circ}$ and shoulder abducted $120^{\circ}$ (starting position). Test was applied two types that muscle relax position and muscle contraction position. Muscle relax position is equal to starting position and muscle contraction position is that upper extremity lift up about 5cm from the table. We measured the thickness of the multifidus muscle in each position by ultrasound. Results: There was a statistically significant difference between the two groups in deviation of Both Side Difference of Activated resting-Arm Lifting Ratio according to posture change between the chronic low back pain patient group and the normal group. Conclusion: The result of this study support previous study showing that there is an imbalance in the activity of multifidus in patients with chronic low back pain.

• Steel and Composite Structures
• /
• 제26권4호
• /
• pp.473-484
• /
• 2018

Free vibration of cross-ply laminated plates using a higher-order shear deformation theory is studied. The arbitrary number of layers is oriented in symmetric and anti-symmetric manners. The plate kinematics are based on higher-order shear deformation theory (HSDT) and the vibrational behaviour of multi-layered plates are analysed under simply supported boundary conditions. The differential equations are obtained in terms of displacement and rotational functions by substituting the stress-strain relations and strain-displacement relations in the governing equations and separable method is adopted for these functions to get a set of ordinary differential equations in term of single variable, which are coupled. These displacement and rotational functions are approximated using cubic and quantic splines which results in to the system of algebraic equations with unknown spline coefficients. Incurring the boundary conditions with the algebraic equations, a generalized eigen value problem is obtained. This eigen value problem is solved numerically to find the eigen frequency parameter and associated eigenvectors which are the spline coefficients.The material properties of Kevlar-49/epoxy, Graphite/Epoxy and E-glass epoxy are used to show the parametric effects of the plates aspect ratio, side-to-thickness ratio, stacking sequence, number of lamina and ply orientations on the frequency parameter of the plate. The current results are verified with those results obtained in the previous work and the new results are presented in tables and graphs.

• 대한기계학회논문집B
• /
• 제21권1호
• /
• pp.15-23
• /
• 1997

An experimental investigation of two-dimensional steady natural convection cooling in a vertical open top cavity with conducting side walls of finite thickness is presented. The various heat-generating discrete heaters are located on one vertical wall of the cavity. When each heater dissipates different amount of power, the purpose of the work is to obtain the optimal array condition of the heaters. The four cases of non-uniform heating conditions are considered. The temperature fields in the cavity were visualized by the interferometer and local temperatures of the vertical wall were measured by thermocouples. The heaters were arranged in two configurations: flush-mounted on a vertical wall or protruding from the wall about 4.5 mm. The vertical wall was constructed out of copper or epoxy-resin sheet. Experiments have been conducted for air with constant Prandtl number(Pr=0.7), the aspect ratio of 4.6, 7.5, 9.5, power input in the range of 0.9 W ~ 4.2 W. For the enhancement of the cooling effectiveness, the upper and lower of vertical wall would give the better position for the heaters of higher heat flux.

• 한국표면공학회지
• /
• 제43권6호
• /
• pp.272-277
• /
• 2010

We investigated the life time characteristics of OLED device with aluminium oxide ($AlO_x$) passivation film on glass substrate and polyethylene terephthalate (PET) substrate by RF magnetron sputtering for the transparent barrier film applied to flexible OLED device. Basic buffer layer was determined as $Alq_3$(500 nm)-LiF(300 nm)-Al(1200 nm), and the most suitable aluminium oxide ($AlO_x$) film have been formed when the partial volume ratio of oxygen was 20% and the sputtering power was 100 watt and the minimum thickness of buffer was $2\;{\mu}m$. $AlO_x$/epoxy hybrid film was also used as a effective passivation layer for the purpose of improving life time characteristics of OLED devices with the glass substrate and the plastic substrate. Besides, the simultaneous deposition of $AlO_x$/epoxy film on back side of PET could result in better improvement of life time.

• 대한방사선기술학회지:방사선기술과학
• /
• 제16권1호
• /
• pp.57-65
• /
• 1993

Asymetric system have been introduced in these years by KODAK company nam of Insight system for the purpose of improve the chest image. We have had a problem of chest radiology that it is very difficult to visualize the lung field and modiastinal region at one shot. That's why we are the RT using the technique of high voltage hard quality radiography in chest radiography. Also it is known the c-type wide latitude film can lift up the density of mediastinal structures. Authors investigated the photographic characteristics and physical structure of Insight system. Method 1. Investigated the structure of Emulsion layer. Calculated the particle size of Insight system using SEM(Scanning Electron Microscope). 2. Photographic characteristics has been compared the Insight system with the ortho KM/MG combination in $60{\sim}120kV$ range. Results 1. The particle size of backside film were investigated about 2 times larger that of front side film. 2. The front and backscreen's thickness ratio was detected 1 : 3.87, that the backscreen's thickness was thicker than frontscreen. 3. At the view point of photographic characteristics the frontside of insight system make up the contrast, backside make up the density at low exposure lesion.

• 한국강구조학회 논문집
• /
• 제13권1호
• /
• pp.101-113
• /
• 2001

본 연구의 주된 목적은 전단 층을 갖는 two-parameter 탄성지반 위에 놓인 복합적층판의 처짐에 관한 규명이다. 본 논문은 탄성지반에 놓인 비등방성 구조의 변형거동과 2중 조화함수를 이용한 3차 전단변형이론의 확장에 초점을 두고 있다. 유도된 식들을 검증하기 위해 Timoshenko의 탄성지반 위에 놓인 단순지지 된 등방성판과 LUSAS 프로그램에 의한 이방성판의 처짐과 비교하였으며 본 연구의 결과들은 등방성판과 이방성판의 결과와 매우 정확히 일치함을 알 수 있었다. 처짐에 관한 수치해석결과들은 폭-두께 비, 형상 비 재료 비등방성과 전단지반계수 등에 따른 효과를 보여준다.

• 한국항공우주학회지
• /
• 제35권10호
• /
• pp.891-898
• /
• 2007

피치 제어형 수평축 풍력터빈에 대한 공력최적 설계 형상과 피치 변화에 따른 공력 성능 특성을 수치적으로 계산하였다. 수치적 방법은 날개 요소이론을 적용하였으며, Prandtl의 팁 손실 효과, 에어포일의 분포 효과, 후류의 회전 효과 등을 고려하였다. 블레이드 설계에는 총 6개의 서로 다른 에어포일을 사용하였으며, 구조적 강성을 갖기 위해서 허브 측에는 최대 40% 두께비의 에어포일을 분포시켰다. 최적 설계에서 얻어진 비선형 코드 길이는 제작성과 무게 등을 고려하여 선형화 시켰고, 선형화에 따른 공력성능 변화는 무시할만하다는 결과를 얻어내었다. 피치각 변화에 따른 동력성능, 추력성능, 토크 성능 곡선을 비교한 결과 $3^{\circ}$의 피치각 변화에도 민감한 공력 값의 변동이 생김을 알 수 있었고, 정밀한 피치 제어를 위한 각도 제어는 증분이 $3^{\circ}$보다 작은 값으로 피치 제어 알고리즘과 피치 구동 장치가 필요함을 알 수 있었다. 또한 최대 토크는 설계속도비보다 작은 속도비에서 발생되는 결과를 보여주었다.