• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2001년도 추계학술대회(한국공작기계학회)
• /
• pp.32-37
• /
• 2001

In the present industry, there are necessary to cut not only iron metals but also non-ferrous metals such as aluminum, brass, plastic and wood(Paulownia). therefore it had been made the studies of non-ferrous metals by many scientists. we hope this kind of study will continue. The purpose of this study is to conduct the basic experiment about influencing of change the side rake angle at turning of non-ferrous metals. As the results, the surface roughnesses were on the increase with a increase of side-rake angle at the case of the plastic, brass, aluminum, and paulownia.

• Journal of the Korean Wood Science and Technology
• /
• 제38권1호
• /
• pp.1-10
• /
• 2010

이 연구에서는 목재의 효율적인 이용의 일환으로 스프루스 직교형적층재의 중층을 중밀도섬유판(medium density fiberboard, MDF), 파티클보드(particle board, PB) 및 오에스비(oriented strand board, OSB)의 3종류의 시판용 목질보드를 복합적층한 3층 목질계 복합적층재(패널)를 제작하여, 중층 목질보드라미나의 구성엘리멘트가 복합적층재의 휨 크리프성능에 미치는 영향을 조사하였다. 복합적층재의 휨 크리프곡선은 우측상변이 급증하는 지수함수 그래프를 나타내었고, 각 복합적층재의 중층 목질보드라미나의 종류에 따라 다른 경향을 나타내었다. 복합적층재의 크리프변형은 표층섬유직각방향($C_{\perp}$ 타입)에서는 중층에 PB, MDF, OSB를 배열한 $C_{\perp}$(P)타입 > $C_{\perp}$(M)타입 > $C_{\perp}$(O)타입의 순으로, OSB를 중층에 배열한 타입의 크리프변형이 MDF나 PB를 중층에 배열한 것의 2배 이상 적은 것이 확인되었고, 복합적층에 의해 스프루스 섬유직각방향의 크리프변형의 현저한 감소가 나타났다. 한편, 표층섬유방향($C_{\parallel}$ 타입)의 크리프변형은 중층에 PB, OSB, MDF를 삽입한 $C_{\parallel}$(P)타입 > $C_{\parallel}$(O)타입 > $C_{\parallel}$(M)의 순이었으나, 복합적층에 의해 적층재상호간의 비는 현저히 감소하였고, 중층에 PB와 OSB를 배열한 복합적층재의 크리프변형의 차이는 매우 적은 것이 확인 되었다. 이 값은 목질보드의 크리프변형보다는 0.108~0.464배의 적은 크리프변형을 나타내어 복합적층에 의해 목질보드의 크리프변형의 현저한감소가 나타났다. 복합적층재의 표층섬유방향에 대한 표층섬유직각방향의 크리프이방성은 초기변형보다 크리프변형이 현저히 컸지만, 스프루스 평행형적층재의 크리프이방성보다는 현저히 감소하는 것이 확인되었다.

• 한국가구학회지
• /
• 제23권2호
• /
• pp.122-129
• /
• 2012

This article was intended as fundamental materials to recognize the current status of furniture hard ware in Korean market and to fix the identity of Korean furniture, by investigating and comparing the furniture hard ware used in the Joseon era and in modern times by type, function, shape and material. The analysis of furniture hard ware of the Joseon era and modern times from the view of functional aspects was oriented to the hard ware necessary to open and close the door & drawer on one side, and to that being attached to the main body of furniture not to scratch the wood by another wood on the other side, and from this the following conclusion was drawn. First of all, "Gwangdoojung" - a kind of spike- and metal decoration on the edge of the furniture disappeared, while the function-oriented hard wares have been diversified in modern times, from the perspective of the change of kinds. Second, the functional aspect of the furniture hard ware was emphasized in modern times than the Joseon era. In other words, the hard wares of the Joseon era came into view due to their strong appeal to decoration, whereas those of modern times were mostly hidden or moderated, keeping the function substantially. Third, the hard wares from the Joseon era were shown in concrete and detailed shape motivated by natural objects and furthermore even gloriously, but the modern hard wares are simple & basic geometry, from a formative point of view. Fourth, the material aspects present that the Joseon era's hard ware was mainly cast iron, whereas that of modern times shows the diversification from metal to even plastic. Finally, the recent trend in naming of the hard wares is the words of foreign origin. This resulted from that the foreign names of hard wares are valid also after import process in Korean market, so the domestic development of hard ware as the essential factor for the furniture design is urgently necessary to establish the identity of Korean modern furniture.

• 복식
• /
• 제53권1호
• /
• pp.1-15
• /
• 2003

This study as one of a series of systematic studies about dancing costumes will compare the costumes of the middle age with their normal style of dress. In brief, this study wants people to know about middle a9e dancing costumes and understand the culture in the middle ages. It was found that people's everyday clothes in the middle age such as Surcot. Surcot-ouvert, Pourpoint, Houppelande were used as dancing costumes. They were, however. changed from the public's clothes which were tight and long. Rather than wearing costume over others. dancers wore costumes which had slits on skirt or sleeves to increase motion. With the Wild Man of the Wood's which only nobles used for their dancing costumes. costumers highlighted the beauty of human body There were various costume materials used in the middle ages like silk. cotton fabrics, linen or brocade. These materials were used for Surcot and Pourpoint as dancing costumes. The naturalness of nature or geometric patterns also was expressed on the costumes. Further about those patterns, because the development of stained glass, vivid colors were used especially red, light green, blue etc. As for the hair styles used, dancers let their hair down and put a jeweled crown over their hair. In summation. dancers wore the same clothes that normal People did, but the costumes were different depending on social status and gender. The costumes of ordinary people's were based upon ordinary clothes that moved and emphasized the dynamic motion. On the other side, the court dancers' costumes were very fancy. symbolizing a measurement of nobles' from wealth and authority. as well as an expression of a sense of beauty, The main features of middle ages follows. : To emphasize vitality, there were long slits on the side of skirt. Hair decorations and jewels are more used than in the ancient age's. To hide a dancer's social status. they could use a mask. Wild Man of the Wood's was used for the body makeup. All these features of the dancing costumes must contribute to the progress of the dance in the middle age's.

• 한국산림과학회지
• /
• 제17권1호
• /
• pp.17-22
• /
• 1973

잣나무 인공단순림(人工單純林)에서 수간(樹幹)의 세장도(細長度)와 편심도(偏心度)를 조사(調査)한바, 우세목(優勢木)의 수간직경(樹幹直徑)과 지상고(地上高)는 대략 평행적 관계이고 지상고(地上高)가 낮은 부위(部位)는 편심(偏心)의 정도(程度)가 $R_1$방향(方向)으로 심하고 수목(樹木)의 심재(心材)는 비대생장(肥大生長)이 심(甚)할수록 크다.

• 대한인간공학회지
• /
• 제34권1호
• /
• pp.1-10
• /
• 2015

Objective: The purpose of this paper is to evaluate old and newly designed ammunition boxes from an ergonomic point of view. Background: The ammunition boxes made of wood, which are currently used by the military, have some difficulties such as corrosion and damage of ammunition, environmental pollution, and stock management. Also, damages to the wooden ammunition boxes take place frequently, because soldiers carry them manually. Method: Sixteen participants volunteered to randomly perform lifting, carrying, and side-by-side moving tasks with 4 different old and new boxes, respectively for the ammunitions of 5.56mm, 60mm, 81mm, and 105mm in diameter. The old boxes are made of wood and are currently used in the military, while the new boxes are made of plastics. The joint moments of the elbow, shoulder, back, and knee were measured by using a motion analysis system and force platforms. In addition, an electromyographic system was used to measure the forces of hand and wrist muscles. Results: In most tasks, new boxes caused less joint moments at the elbow and shoulder than old boxes, because the new boxes were lighter and smaller than the old boxes. New boxes also derived less hand and wrist muscle forces due to the provision of fixed hard handles rather than string handles. Conclusion: The ergonomically designed new boxes could reduce the physical stresses of soldiers manually handling ammunitions and be helpful for storage and reuse. Application: This study shows an ergonomic application example for product development and evaluation.

• 펄프종이기술
• /
• 제46권1호
• /
• pp.29-38
• /
• 2014

Guar gum is added to the pulp suspension at the suction side of the fan pump just before the sheet is formed on either a fourdrinier or cylinder machine. Guar gum replaced and supplements these hemicelluloses in paper bonding with many advantages, which include improved sheet formation with a more random distribution of pulp fibers. But, guar gum has serious storage problem. This material has easily decayed after High-temperature conditions such as summer. In this study, various properties of cotton handsheet were measured to solve the problem of deformation while storing guar gum and to improve the durability. After aging, which is one of the durability tests, cotton handsheet with 0.2% and 0.3% of A-PAM showed improved mechanical properties and bursting index and folding endurance of cotton handsheet with 0.3% of A-PAM were similar to those with guar gum. The yellowness loss of cotton handsheet with synthetic polymers was lower than those with guar gum.

• 농업과학연구
• /
• 제37권2호
• /
• pp.271-276
• /
• 2010

In this study, the light-frame wood shear walls according to the sheathing materials was carried out to investigate the shear load performance. Most common sheathing materials are the structural OSB and gypsum board used to consist wall of wood-frame house. Seven different type of specimens are composed of several sheathing materials and shear test was taken to evaluate shear performance by KS F 2154. As a result, shear walls(G12.5/G12.5 and G12.5/OSB) show that maximum shear strength and shear rigidity modulus are 7316N/mm${\cdot}$118.25 N/mm and 11129 N/mm${\cdot}$184.66 N/mm respectively. The shear wall using gypsum board 15mm improve maximum shear strength and shear rigidity modulus about 30%. The shear wall using 15mm gypsum board showed intermediate value in one side specimens. Different types of shear walls could be compared with the shear load performance. Also, nailed joint failure aspects are different to sheathing material and installing method.

• Journal of the Korean Wood Science and Technology
• /
• 제33권1호통권129호
• /
• pp.58-62
• /
• 2005

우리나라의 가로수로 널리 분포되어 있는 수종인 플라타너스에 생리활성이 우수한 천연물인 베출린산(BA)을 대량생산할 수 있는지를 알아보기 위하여 본 연구를 수행하였다. 서울과 경기도의 여러지역의 가로수를 대상으로 시료를 계절별로 채집하여 기건하여 분쇄한 시료를 메탄올로 추출하여 그 추출물을 농축하여 얻고 크로로포름으로 분획하여 BA fraction을 얻은 후, HPLC로 베출린산의 함량을 측정하였다. 그 결과, 여러 지역에서 채집하여 분석한 대부분의 플라타너스 수종이 상당량의 베출린산을 함유하고 있으며 11월 말경이 BA를 대량 얻기 위한 최적의 시기로 확인하였다.

• 한국축산시설환경학회지
• /
• 제7권1호
• /
• pp.13-20
• /
• 2001

This study was conducted to investigate the actual conditions on housing and facilities for goat. This investigation of the actual conditions was investigated by the style of farm which was divided into sideline scale and speciality scale included 47 farms. The results are summarized as follows: Rearing scale was 48.9% for 50-100 heads per farm. Rearing type was 46.8% for grazing type and 53.2% for barn type. Housing type was 27.7% for simple frame housing and 72.3% for permanent housing. Pipe was used 80.8% with Pillar and Girder as the housing frame at farm. For the pipe used in farm, 27.7% of them was used for simple frame housing. Side wall was composed of cement and winch curtain to be 29.8%, slate roof to be 40.4%, pipe partition to be 38.3%, and cement floor to be 51.1%. Materials of feeding trough were wood and Zinc grater to be 41.5%, respectively. Type of feeding trough was square to be 70.2%. The feeding trough was located in barn to be 48.9%. Material of water supply facilities was plastic to be 87.2%. Type of water supply facilities was mostly square to be 76.6%. Water-trough was located in playground to be 48.9%. Parturition facilities were consisted of partition structure by group to be 42.5% and were mainly composed of pipe and wood. 46.8% of the barn did not have delivery room in the farm.