• 한국주조공학회지
• /
• 제31권2호
• /
• pp.66-70
• /
• 2011

Hot dip aluminizing (HDA) is widely used in industry for improving corrosion resistance of material. The formation of intermetallic compound layers during the contact between dissimilar materials at high temperature is common phenomenon. Generally, intermetallic compound layers of $Fe_2Al_5$ and $FeAl_3$ are formed at the Al alloy and Fe substrate interface. In case of cast iron, high contact angle of graphite existed in the matrix inhibits the formation of intermetallic compound layer, which carry with it the disadvantage of a reduced reaction area and mechanical properties. In present work, the process for the removal of graphite existed on the surface of specimen has been investigated. And also HDA was proceeded at $800^{\circ}C$ for 3 minutes in aluminum alloy melt. The efficiency of graphite removal was increased with the reduction of particle size in sanding process. Graphite appears to be present both in the region of melting followed by re-solidification and in the intermetallic compound layer, which could be attributed to the fact that the surface of cast iron is melted down by the formation of low melting point phase with the diffusion of Al and Si to the cast iron. Intermetallic compound layer consisted of $Fe(Al,Si)_3$ and $Fe_2Al_5Si$, the layer formed at cast iron side contained lower amount of Si.

• 한국의사학회지
• /
• 제21권2호
• /
• pp.13-28
• /
• 2008

Medical Science in general is a study dedicated to human. It is important to understand how human is being seen in medical science. The difference of this perspective among various medical science in different parts of the world shows the difference in ways of understanding human, and furthermore, difference in ways of understanding diseases. On the other side, Oriental Medicines tends to perceive human as a whole. Heo Joon's perspective on human is elaborated in his book, Dongeuibogam. The foundation of this perspective is found is the Thesis of Four Generals and Five Constants, Neijing. There are many discussions in the Thesis of Four Generals and Five Constants, which include the thesis of correspondence between nature and human: which define the relationship between human and nature in terms of four generals and five constants, and the thesis of xing and color: which offers the tool of making diagnosis on Four Generals and Five Constants, since xing and color designates the result of Four Generals and Five Constants. Other methods are also merely ways of expressing Four Generals and Five Constants in different angle. After all, the perspective of human shown by Heo Joon can be explained in one word as the thesis of Four Generals and Five Constants, and the principles of its theory, which are the thesis of correspondence between nature and human and the thesis of xing and color are also nothing more than a tool of underatanding Four Generals and Five Constants more efficiently.

• 한국의류산업학회지
• /
• 제13권6호
• /
• pp.934-942
• /
• 2011

This study was intended to analyze conventional grading increments and methods for middle-age men's pants, and to suggest new grading guidelines that will enable to improve satisfaction with size and silhouette as a result of combining the concept of grading, which help maintain the ratio and proportion by sizes as one of ready-made apparel's advantages, with body form oriented and aesthetic approaches. In the apparel industry, the current sizing specifications and methods adopted by relevant companies, as well as the characteristics of body forms of men aged 35 to 55 years were comparatively analyzed to find out problems and ultimately to suggest their solutions or improvements. It was considered that as the conventional grading practices used in the industry were customary on the basis of the past experiences, it was required to take the body forms of target consumers into account and also, to reconsider the conventional grading methods. Analyses of sizing and specifications by brands show that 4 to 19 sizes including 82 or 84 as standard size have been produced. Since men's apparel has a large number of sizes with the large range of sizes, grading is critically important. As silhouettes depend on the distribution of grading rule values at each point of increment pattern in the main regions during grading, it is necessary to consider both size grading and form variations. To maintain an appropriate silhouette with keeping the angle of center back line of a pattern, it is desirable to set the ratio of side line part to center part from the crease line to approximately 3:7. It is required to diversify the values of grading rules according to different sizes and pattern regions in consideration for the body forms of key consumers. In addition, if the natural lines of designs and patterns for the width increments of waist circumference and hip circumference, the increments of hip width in pant's front and back panels, the ratio of grading rule values of the right and left sides of crease line, knee circumference, thigh circumference and so on are taken into account, grading will be satisfactory in the all aspects of size, silhouette and ratio.

• Journal of Dental Anesthesia and Pain Medicine
• /
• 제16권2호
• /
• pp.103-109
• /
• 2016

Background: One nostril must be selected for nasotracheal intubation. In some cases, structural anomalies within the nasal cavity hinder the insertion of the tube or complications, such as epistaxis, develop. This study examined the possibility of using radiography to select the nostril that would induce fewer complications. Methods: Four hundred and five patients who underwent nasotracheal intubation under general anesthesia were studied. A 7.0-mm internal diameter nasal right angle endotracheal (RAE) tube and 6.5-mm internal diameter nasal RAE tube were inserted into men and women, respectively. Complications were considered to have developed in cases in which insertion of the tube into the nasal cavity failed or epistaxis occurred. The tube was inserted into the other nostril for insertion failures and hemostasis was performed in cases of epistaxis. The degree of nasal septal deviation was determined from posteroanterior skull radiographs or panoramic radiographs; the incidence of complications was compared depending on the direction of the septal deviation and the intubated nostril. Results: The radiographs of 390 patients were readable; 94 had nasal septum deviation. The incidence of complications for cases without nasal septum deviation was 16.9%, that for cases in which the tube was inserted into the nostril on the opposite side of the deviation was 18.5%, and that for cases in which the tube was inserted into the nostril with the deviation was 35.0%, showing a high incidence of complications when intubation is performed through the nostril with septum deviation (chi-square test, P < 0.05 ). Conclusions: Although there were no differences in the incidence rates of complications between intubation through the left nostril and that through the right nostril, radiological findings indicated that incidence of complications significantly increased when the tube was inserted into the nostril with the septum deviation.

• Current Optics and Photonics
• /
• 제3권6호
• /
• pp.541-547
• /
• 2019

A novel photonic crystal fiber (PCF) sensor with three D-shaped holes based on surface plasmon resonance (SPR) is analyzed in this paper. Three D-shaped holes are filled with the analyte, and the gold film is deposited on the side of three planes. The design of D-shaped holes with outward expansion can effectively solve the uniformity problem of metallized nano-coating, it is beneficial to the filling of the analyte and is convenient for real-time measurement of the analyte. Compared with the hexagonal lattice structure, the triangular arrangement of the clad air holes can significantly reduce the transmission loss of light and improve the sensitivity of the sensor. The influences of the air hole diameter, the distance between D-shaped holes and core, and the counterclockwise rotation angle of D-shaped holes on sensing performance are studied. The simulation results show that the wavelength sensitivity of the designed sensor can be as high as 10100 nm/RIU and the resolution can reach 9.9 × 10^-6 RIU.

• The Journal of Advanced Prosthodontics
• /
• 제9권6호
• /
• pp.470-475
• /
• 2017

PURPOSE. The purpose of this study was to identify the complex course of the mandibular canal using 3D reconstruction of microCT images and to provide the diagram for clinicians to help them understand at the interforaminal region in Korean. MATERIALS AND METHODS. Twenty-six hemimandibles obtained from cadavers were examined using microCT, and the images were reconstructed. At both the midpoint of mental foramen and the tip of anterior loop, the bucco-lingual position, the height from the mandibular inferior border, the horizontal distance between two points, and position relative to tooth site on the mandibular canal were measured. The angle that the mental canal diverges from the mandibular canal was measured in posterior-superior and lateral-superior direction. RESULTS. The buccal distance from the mandibular canal was significantly much shorter than lingual distance at both the mental foramen and the tip of anterior loop. The mandibular canal at the tip of anterior loop was significantly located closer to buccal side and higher than at the mental foramen. And the mental canal most commonly diverged from the mandibular canal below the first premolar by approximately $50^{\circ}$ posterior-superior and $41^{\circ}$ lateral-superior direction, which had with a mean length of 5.19 mm in front of the mental foramen, and exited to the mental foramen below the second premolar. CONCLUSION. These results suggest that it could form a hazardous tetrahedron space at the interforaminal region, thus, the clinician need to pay attention to the width of a premolar tooth from the mental foramen during dental implant placement.

• 복식
• /
• 제52권2호
• /
• pp.71-80
• /
• 2002

The purpose of this study was to examine the correlation between the shape of the foot and foot abrasion. and to provide preliminary data for shoe manufacturing by comparing the length of a woman's feet and the shoe size. The Martin calibrator and measuring tapes were utilized to measure the shapes of 163 female college students' feet. Indirect measurements were also obtained by line drawing of the feet for additional analysis. Brief questionnaires about what type of shoes are worn were given to the subjects of the study. Data analysis was presented by frequency, percentage, and standard deviations. Factor analysis and correlation co-efficiency of data was conducted on the significance level of p〈.05. The results of the study are as follows (1) The average number of days per week in which the subjects wear ladies' shoes per week were 4.5. Little over half of the subjects (53.87% ) answered that they wear heeled shoes for more than 8 hours per day. The most preferred height of a ladies'shoe heel was between 2 cm and 4 cm, as replied by 41.0% of the subjects. (2) The foot area where abrasion occurs most often was around the heel (51.2%) and the middle part of the sole (50.9%) (3) Factors correlated to the heel abrasion included the circumference and the breadth of the foot. The abrasion on the side of the first toe of mid-sized feet was most affected by the angle of the first the and inner foot line. The height of the foot heel was a significant factor for the abrasion near the anklebone. In conclusion, the abrasion resulted from the inappropriate fitting of the shoe and the foot. Also, the circumference and the width factors were more influential rather than the foot length. Therefore, more database on this should be systemized and available to the footwear manufacturers and the customers for more practical use of shoe size and public education.

• Archives of Reconstructive Microsurgery
• /
• 제17권2호
• /
• pp.108-114
• /
• 2008

Purpose: There are many controversies concerning therapeutic guidelines for the treatment of Kienb$\ddot{o}$ck's disease. The purpose of this study is to evaluate the clinical and radiological result of lunate replacement by vascularized os pisiform transfer in advanced Kienb$\ddot{o}$ck's disease. Materials & Methods: There were two men and three women. The mean age was 55 years, ranging from 41 to 70. According to Lichtman's classification, three cases were stage IIIb and two cases were stage IV. Results: At the period of follow up, pain during motion was markedly diminished in all patients, the arc of motion ranged on average from 49 degrees of flexion to 53 degrees of extension and the grip power of the affected hand reached on average 83% compared with the contralateral side. Clinical results assessed by DASH and modified Mayo score showed 8 and 90. On plain X-rays, carpal height ratio and radioscaphoid angle were not changed postoperatively. Conclusion: Lunate excision and vascularized os pisiform transfer is a reliable alternative method for the treatment of advanced Kienb$\ddot{o}$ck's disease.

• 한국컴퓨터정보학회논문지
• /
• 제22권1호
• /
• pp.63-69
• /
• 2017

In this paper, we propose a method to optimize the geometry and installation position of the mixer in the selective catalytic reduction (SCR) system by computational fluid dynamic(CFD). Using the commercial CFD software of CFD-ACE+, the flow dynamics of the flue gas was numerically analyzed for improving the injection uniformity of the reduction agent. Numerical analysis of the mixed gas heat flow into the upstream side of the primary SCR catalyst layer was performed when the denitrification facility was operated. The characteristics such as the flow rate, temperature, pressure loss and ammonia concentration of the mixed gas consisting of the flue gas and the ammonia reducing gas were examined at the upstream of the catalyst layer of SCR. The temperature difference on the surface of the catalyst layer is very small compared to the flow rate of the exhaust gas, and the temperature difference caused by the reducing gas hardly occurs because the flow rate of the reducing gas is very small. When the mixed gas is introduced into the SCR reactor, there is a slight tendency toward one wall. When the gas passes through the catalyst layer having a large pressure loss, the flow angle of the exhaust gas changes because the direction of the exhaust gas changes toward a smaller flow. Based on the uniformity of the flow rate of the mixed gas calculated at the SCR, it is judged that the position of the test port reflected in the design is proper.

• Journal of Biosystems Engineering
• /
• 제29권1호
• /
• pp.9-20
• /
• 2004

On the basis of design theory of soil inversion, two types of moldboard plow with secondary soil mover was designed and constructed to invert furrow slice at same position with furrow bottom. A series of soil bin experiment was carried to investigate the performance of prototypes. First prototype of new concept plow showed two kinds of problems during the preliminary experiment. For the plowing depth of 6cut the prototype did not invert the furrow slice, instead it just cut furrow bottom and the furrow slice returned to the original position. For the plowing depth of 8cm, there was soil clogging problem at the rear part of plow. From the above results it was concluded that the first prototype can not be used for the inversion of furrow slice at same position with furrow bottom. Second prototype could invert furrow slice at the same position with furrow bottom, but the performance was affected by soil moisture content soil hardness and plowing speed very much. For the higher soil moisture content, for the higher soil hardness and higher plowing speed, the prototype showed higher soil inversion performance. For the second prototype the inversion ratio was almost 100%, inversion angle was in the range of 90 to 100 degree and side displacement was less than 4 cm. But the furrow slice was not continuous, it was cut in the length of 30 to 40 cm. The reason why the furrow slice was cut in that length is blamed for the design of moldboard surface. The specific draft of prototype was in the range of 37.24 kN/㎡ to 42.14 kN/㎡ this value is a little higher than that of the conventional plow, or from 30.38 kN/㎡ to 33.32 kN/㎡. But the difference was not so big. The inversion performance of the second prototype for the field experiment was much better than that of soil bin experiment due to the better soil and operational conditions. Sticky and compacted soil conditions, and higher plowing speed was suitable for the plowing operation of the second prototype