• Title/Summary/Keyword: shup

Search Result 96, Processing Time 0.029 seconds

Strength Characteristics of Stabilized Dredged soil and Correlation with Index Properties

  • Kim, Yun-Tae;Do, Thanh-Hai;Kang, Hyo-Shup
    • Proceedings of the Korean Geotechical Society Conference
    • /
    • 2010.03a
    • /
    • pp.489-494
    • /
    • 2010
  • A geo-composite soil (GCS) is a stabilized mixture of bottom ash, cement and dredged soil. Various samples with different mass ratios of mixtures were tested under curing time of 7 and 28 days to investigate physical properties and compressive strength. This paper focused on the effect of bottom ash on the strength characteristics of Busan marine dredged soil. Cement has been added as an additive constituent to enhance self-hardening of the blended mixture. The unconfined compressive strength of GCS increases with an increase in curing time due to pozzolanic reaction of the bottom ash. The strength after 28 days of curing is found to be approximately 1.3 to 2.0 times the strength after 7 days of curing, regardless of mixture conditions. The secant modulus of GCS is in the range of 55 to 134 times the unconfined compressive strength. The correlation of unconfined compressive strength with bottom ash content and initial void ratio are suggested.

  • PDF

Effect of Ball milling on the Hydrogenation Properties of Mg-Ni Powder Mixtures (볼밀링이 마그네슘-니켈 혼합분말의 수소화 반응특성에 미치는 영향)

  • Han, Ji-Seong;Kim, Ki-Won;Ahn, In-Shup;Ahn, Hyo-Jun
    • Transactions of the Korean hydrogen and new energy society
    • /
    • v.9 no.2
    • /
    • pp.85-92
    • /
    • 1998
  • The hydrogenation behavior of $Mg_2Ni$ powder prepared by ball milling has been studied. Ball milled $Mg_2Ni$ was transformed to an amorphous-like state after 200hr ballmilling, and crystallized to $Mg_2NiH_x$ by hydrogenation at got. The hydrogen storage capacity gradually increased as a function of ball milling time. $Mg_2Ni$ by 400hr ballmilling shows higher hydrogen storage capacity (3H/M) than $Mg_2Ni$ by VIM(Vacuum Induction Melting).

  • PDF

Synthesis of Cathode Material-Nickel Sulfides by Mechanical Alloying for Sodium Batteries

  • Liu, Xiaojing;Ahn, Hyo-Jun;Ahn, In-Shup
    • Journal of Powder Materials
    • /
    • v.19 no.3
    • /
    • pp.182-188
    • /
    • 2012
  • In this study, fine cathode materials $Ni_3S_2$ and $NiS_2$ were synthesized using the simple, convenient process of mechanical alloying (MA). In order to improve the cell properties, wet milling processes were conducted using low-energy ball milling to decrease the mean particle size of both materials. The cells of Na/$Ni_3S_2$ and Na/$NiS_2$ show a high initial discharge capacity of 425 mAh/g and 577 mAh/g respectively using wet milled powder particles, which is much larger than commercial ones, providing some potential as new cathode materials for rechargeable sodium-ion batteries.

Importance of Differential Diagnosis of a Possible Brain Tumor in Patients with Cervical Radiculopathy

  • So, Jin-Shup;Kim, Young-Jin;Lee, Sang-Koo;Cho, Chun-Sung
    • Journal of Korean Neurosurgical Society
    • /
    • v.65 no.1
    • /
    • pp.145-150
    • /
    • 2022
  • Lesions occurring simultaneously in the somatosensory or motor cortex of the brain and the cervical spine are rare. Brain tumors can cause similar symptoms to cervical lesions which can lead to confusion in treatment priorities. Moreover, if cervical disease is noticeably observed in radiologic findings of a patient complaining of cervical radiculopathy with non-specific electromyography results, it is common to no longer perform further evaluation. Here we introduce two cases where the cause of cervical radiculopathy was first considered to be the result of a degenerative cervical disease but was later discovered to be a result of a brain tumor.

Pharmacological Management of Germinal Matrix-Intraventricular Hemorrhage

  • Jaewoo Chung;Sang Koo Lee;Chun-Sung Cho;Young Jin Kim;Jung Ho Ko;Jung-Ho Yun;Jin-Shup So;In-Ho Jung
    • Journal of Korean Neurosurgical Society
    • /
    • v.66 no.3
    • /
    • pp.258-262
    • /
    • 2023
  • Germinal matrix-intraventricular hemorrhage (GM-IVH) is among the devastating neurological complications with mortality and neurodevelopmental disability rates ranging from 14.7% to 44.7% in preterm infants. The medical techniques have improved throughout the years, as the morbidity-free survival rate of very-low-birth-weight infants has increased; however, the neonatal and long-term morbidity rates have not significantly improved. To this date, there is no strong evidence on pharmacological management on GM-IVH, due to the limitation of well-designed randomized controlled studies. However, recombinant human erythropoietin administration in preterm infants seems to be the only effective pharmacological management in limited situations. Hence, further high-quality collaborative research studies are warranted in the future to ensure better outcomes among preterm infants with GM-IVH.

Fault Tolerant Controller Design for Supersonic Advanced Trainer Using Model Following Adaptive Technique (모델추종 적응제어기법을 이용한 초음속 고등훈련기의 고장허용제어기 설계)

  • Kim, Seung-Keun;Lee, Ho-Jin;Yoon, Seung-Ho;Han, Young-Su;Kim, You-Dan;Kim, Chong-Shup;Cho, In-Je
    • Journal of the Korean Society for Aeronautical & Space Sciences
    • /
    • v.37 no.5
    • /
    • pp.464-469
    • /
    • 2009
  • In this study, a new fault tolerant controller based on a model following adaptive technique is applied to the reconfiguration mode of supersonic advanced trainer. The designed controller is applied to the flight control system of high performance aircraft. To verify the performance of the proposed controller, numerical simulations are executed using a non-realtime nonlinear verification tool.

A Study on the Hydrogenation Properties of TiNi Alloy Fabricated by Mechanical Alloying Method (기계적합금법에 의해 제조된 TiNi합금의 수소화반응특성에 관한 연구)

  • Ahn, Hyo-Jun;Kim, Bo-Su;Hwang, Jin-Hwan;Ahn, In-Shup;Kim, Ki-Won;Hur, Bo-Young
    • Transactions of the Korean hydrogen and new energy society
    • /
    • v.5 no.2
    • /
    • pp.73-79
    • /
    • 1994
  • The hydrogenation behavior of Ti-Ni powders prepared by mechanical alloying in a high energy ball mill have been investigated by P-C isotherm curves, DSC(differential scanning calorimetry), X-ray diffractometer, SEM(scanning electron microscope). Amorphous TiNi phase was formed after 10 milling hours. The hydrogen storage capacity gradually decreased as a function of mechanical alloying time. There appears the DSC endothermic peak due to hydrogen evolution of amorphous hydride phase.

  • PDF