• Journal of Korean Neurosurgical Society
• /
• v.48 no.6
• /
• pp.480-484
• /
• 2010

Objective : To evaluate the role of lumbar drainage in the prevention of shunt-dependent hydrocephalus after treatment of ruptured intracranial aneurysms by coil embolization in good-grade patients. Methods : One-hundred-thirty consecutive patients with aneurysmal subarachnoid hemorrhage in good-grade patients (Hunt & Hess grades I-III), who were treated by coil embolization between August 2004 and April 2010 were retrospectively evaluated. Poor-grade patients (Hunt & Hess grades IV and V), a history of head trauma preceding the development of headache, negative angiograms, primary subarachnoid hemorrhage (SAH), and loss to follow-up were excluded from the study. We assessed the effects on lumbar drainage on the risk of shunt-dependent hydrocephalus related to coil embolization in patients with ruptured intracranial aneurysms. Results : One-hundred-twenty-six patients (96.9%) did not develop shunt-dependent hydrocephalus. The 2 patients (1.5%) who developed acute hydrocephalus treated with temporary external ventricular drainage did not require permanent shunt diversion. Overall, 4 patients (3.1%) required permanent shunt diversion; acute hydrocephalus developed in 2 patients (50%). There was no morbidity or mortality amongst the patients who underwent a permanent shunt procedure. Conclusion : Coil embolization of ruptured intracranial aneurysms may be associated with a lower risk for developing shunt-dependent hydrocephalus, possibly by active management of lumbar drainage, which may reflect less damage for cisternal anatomy than surgical clipping. Coil embolization might have an effect the long-term outcome and decision-making for ruptured intracranial aneurysms.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2008.04a
• /
• pp.77-80
• /
• 2008

In this paper the electromagnetic shunt damper was newly employed for vibration suppression of the flexible structures. The electromagnetic shunt damper consists of a coil and a permanent magnet. The ends of the coil were connected to the RLC shunt circuit. The numerical solutions of resonant frequency of the shunt circuits were calculated by using Pspice. The vibration and damping characteristics of the flexible beams with the electromagnetic shunt damper were investigated by tuning the circuit parameters. Also, the effect of the magnetic intensity on the shunt damping was studied with the variation of the gap between the aluminum beam and the permanent magnet. Present results show that the magnet shunt damper can be successfully applied to reduce the vibration of the flexible structures.

• 한국초전도학회:학술대회논문집
• /
• v.15
• /
• pp.79-79
• /
• 2005

• Korean Journal of Veterinary Research
• /
• v.48 no.4
• /
• pp.493-500
• /
• 2008

A 2-year-old female Pekingese dog was presented with primary complaints including exercise intolerance and neurological sign associated with hepatic encephalopathy. The major findings in clinical examination included an intermittent seizure, a slow heart rate with pulse deficit, leukocytosis and anemia in hemogram, elevated pre- and post-prandial serum bile acid and hepatic enzymes, hypoproteinemia, coagulopathy, ammonium urate crystaluria and bilirubinuria. Diagnostic tests revealed an intrahepatic portosystemic shunt complicated with a second degree atrioventricular block and QT prolongation. The case was successfully treated with a transvenous coil embolization. Clinical signs were gradually improved and cardiac bradyarrhythmia disappeared. This case is a rare case of intrahepatic portosystemic shunts complicated with a cardiac bradyarrhythmia in a small breed dog fixed by a transvenous coil embolization.

• Proceedings of the Korea Institute of Applied Superconductivity and Cryogenics Conference
• /
• 2000.02a
• /
• pp.173-176
• /
• 2000

MRI magnet has generally multi-section coil configurations to generate highly homogeneous magnetic field. Each coil is bridged by a shunt resistor to protect the superconducting magnet during quench. In order to optimize the shunt resistor, self inductance of each coil and mutual inductances between coils should be determined beforehand. Therefore, we calculated the self and the mutual inductances of MRI magnet with OPERA program for electromagnetic analysis.

• Progress in Superconductivity and Cryogenics
• /
• v.8 no.4
• /
• pp.22-25
• /
• 2006

This paper deals with the computation of the current limiting behavior of high-temperature superconducting (HTS) modules for the superconducting fault current limiter (SFCL). The SFCL module consists of a monofilar type BSCCO-2212 tube and a shunt coil made of copper or brass. The shunt coil is connected to the monofilar superconducting tube in parallel. Through analysis of the quench behavior of the monofilar component with shunt coils, it is achieved to drive an equivalent circuit equation from the experimental circuit structure. In order to analyze the quench behavior of the SFCL module, we derived a partial differential equation technique. Inductance of the monofilar component and the impedance of the shunt coil are calculated by Bio-Savart and Ohm's formula, respectively. We computed the quench behavior using the calculated values, and compared the results with experimental results for the quench characteristics of a component. The results of computation and test agreed well each other, and it was concluded that the analytic result could be applied effectively to design of the distribution-level SFCL system.

• Journal of Veterinary Clinics
• /
• v.24 no.3
• /
• pp.426-431
• /
• 2007

A 5-month-old female Samoyed dog was presented with primary complaints including exercise tolerance and neurological sign associated with hepatic encephalopathy. The major findings in clinical examination included an intermittent seizure, anemia, elevated pre- and post-prandial serum bile acid, hypoproteinemia and bilirubinuria. Diagnostic imaging studies revealed an intrahepatic portosystemic shunt (IPSS). The shunted vessel was successfully occluded by transvenous coil embolization. Clinical signs were gradually improved after shunt occlusion. This case is a rare case of IPSS in a large breed dog fixed by transvenous coil embolization.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.56 no.2
• /
• pp.277-281
• /
• 2007

We investigated fault current limitation characteristics of the resistive superconducting fault current limiter (SFCL) which consisted of a Bi-2212 bulk coil and a shunt coil. The Bi-2212 bulk coil and the shunt coil were connected in parallel. The Bi-2212 bulk coil was placed inside the shunt coil to induce field-assisted quench. The fault test was conducted at an input voltage of $200V_{rms}$ and fault current of $12kA_{rms}\;and\;25kA_{rms}$. The fault conditions were asymmetric and symmetric, and the fault period was 5 cycles. The test results show that the SFCL successfully limited the fault current of $12kA_{rms}\;and\;25kA_{rms}$ to below $5.5{\sim}6.9kA_{peak}\;within\;0.64{\sim}2.17$ msec after the fault occurred. Limitation was faster under symmetric fault test condition due to the larger change rate of current. We concluded that the speed of fault current limitation was determined by the speed of current rise rather than the amplitude of a short circuit current. These results show that the Bi-2212 bulk coil is suitable for distribution-class SFCLS.

• Proceedings of the KIEE Conference
• /
• 2006.07b
• /
• pp.639-640
• /
• 2006

We investigated fault current limitation characteristics of the resistive superconducting fault current limiter(SFCL) which consisted of a Bi-2212 bulk coil and a shunt coil. The Bi-2212 bulk coil and the shunt coil were connected in parallel. The Bi-2212 bulk coil was placed inside the shunt coil to induce field-assisted quench. The fault test was conducted at an input voltage of 200 $V_{rms}$ and fault current of 12 $kA_{rms}$ and 25 $kA_{rms}$. The fault conditions were asymmetric and symmetric, and the fault period was 5 cycles. The test results show that the SFCL successfully limited the fault current of 12 $kA_{rms}$ and 25 $kA_{rms}$ to below $5.5{\sim}6.9kA_{peak}$ within $0.64{\sim}2.17$ msec after the fault occurred. Limitation was faster under symmetric fault test condition due to the larger change rate of current. We concluded that the speed of fault current limitation was determined by the speed of current rise rather than the amplitude of a short circuit current. These results show that the Bi-2212 bulk coil is suitable for distribution-class SFCLs.

• Progress in Superconductivity and Cryogenics
• /
• v.9 no.3
• /
• pp.37-40
• /
• 2007

Large critical current is one of the prerequisites for the design of superconducting electrical equipments with large power capacity. To enlarge the critical current. multiple parallel connection is inevitable. In multiple parallel superconducting coils. the difference in normal resistance of each shunt leads to unequal current distribution. which may yield burnout. Therefore. uniform current distribution is required for a stable operation of multiple parallel superconducting coils. In this paper, Rogowski coils were fabricated to measure each shunt current of a 4-parallel superconducting coil. Four Rogowski coils were installed at the copper bars, which are used as current leads in superconducting coils. As a result, linearity of the Rogowski coils was ascertained and coefficients of each coil, the ratio of voltage and current, were derived. The coefficients were compared with theoretically calculated values. Based on the coefficients, each shunt current was calculated in a 4-parallel superconducting coil, where uniform current. distribution was confirmed. This paper verified the feasibility of the fabricated Rogowski coils as well as operational stability of the 4-parallel superconducting coil in 77K.