• 산업기술연구
• /
• 제21권B호
• /
• pp.301-306
• /
• 2001

Drying shrinkage cracking which may be caused by the relatively large specific surface is a matter of grave concern for latex modified concrete(LMC) overlay and rapid-setting cement latex modified concrete(RSLMC) overlay. Therefore, the purpose of this dissertation was to study the drying shrinkage properties of LMC and RSLMC with the main experimental variables such as cement types(ordinary portland cement, rapid setting cement), latex contents(0, 5, 10, 15, 20%), W-C ratios, and curing days at a same controlled environment of 60% of relative humidity and $20^{\circ}C$ of temperature. Test results revealed that the drying shrinkage of latex modified concrete(LMC), rapid-setting cement latex modified concrete(RSLMC) was considerably lower than that of ordinary portland cement concrete(OPC), rapid-setting cement concrete(RSC), respectively. This may be attributed to the interlocking of hydrated cement and aggregates by a film of latex particles, water retention due to hydrophobic and colloidal properties of the latexes, resulting in reduced water evaporation.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2014년도 추계 학술논문 발표대회
• /
• pp.11-12
• /
• 2014

In this study, fundamental properties of concrete mixed with fiber has been analysed. Compressive strength, tensile strength and plastic shrinkage has been tested to conduct the optimum addition ratio of fiber. Effect to control press concrete's cracking has been tested. The following results could be made as the conclusion. For the flowability, slump decreased about 41-79% when all types of fiber used in the concrete. When the addition ratio of fiber is 1.2%, the slump of concrete decreased about 45%. For the strength properties. all the specimens with different addition ratio of fiber shown higher compressive strength comparing with Plain. Comparing with Plain, cracking decreased when the fiber added. Especially, when NY fiber used in the concrete, the plastic shrinkage did not occurred. In addition, Latex modified concrete(LMC) has improved superior physical and chemical properties. The properties of latex, combined with the low water-cement ratio, produce a concrete that has improved flexural, tensile, and bond strength, lower modulus of elasticity, increased freeze-thaw resistance, and reduced permeability compared to conventional concrete of similar mix design.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2002년도 가을 학술발표회 논문집
• /
• pp.385-390
• /
• 2002

Autogenous shrinkage of concrete has been defined as decrease in volume due to hydration cement, not due to other causes such as evaporation, temperature change and external load and so on. For ordinary concretes, autogenous shrinkage is so little compared to the other deformations that it has been dignored. It has recently been proved, however, that autogenous shrinkage considerably increase with decrease in water to cement ratio. And it has been reported that cracking can be caused by autogenous shrinkage, when high- strength concretes were used. In this study, we propose an analytical system to represent autogenous shrinkage in cement paste in order to control crack due to autogenous shrinkage. The system is composed with the hydration model and pore structure model. Contrary to the usual assumption of uniform properties in the hydration progress, the hydration model to refine Tomosawa's represents the situation that inner and outer products are made in cement paste. The pore structure model is based upon the physical phenomenon of ion diffusion in cement paste and chemical phenomenon of hydration in cement particle. The proposed model can predict the pore volume ratio and the pore structure in cement paste under variable environmental conditions satisfactorily The autogenous shrinkage prdiction system with regard to pore structure development and hydration at early ages for different mix-proportions shows a reasonable agreement with the experimental data.

• Computers and Concrete
• /
• 제5권5호
• /
• pp.435-448
• /
• 2008

Self-compacting concrete (SCC), characterized by the high flowability and resistance to segregation, is due to the high amount of paste (including cement and mineral admixtures) in contrast with normal concrete (NC). However, the high amount of paste will limit the volume fractions of coarse aggregate,and reduce the tendency of coarse aggregate to suppress drying shrinkage deformations. For this reason, SCC tends to produce higher values of drying shrinkage than NC for the most part. In order to assess the drying shrinkage of SCC quantitatively for application to offshore caisson foundations, the formulas presented in the literatures (ACI 209 and CEB-FIP) are used to predict the values of drying shrinkage in SCC according to the corresponding mix proportions. Additionally, a finite element (FE) model, which assumes concrete to be a homogeneous and isotropic material and follows the actual size and environmental conditions of the caisson, is utilized to simulate stress distribution situations and deformations in the SCC caisson resulting from the drying shrinkage. The probability of cracking and the behavior of drying shrinkage of the SCC caisson are drawn from the analytic results calculated by the FE model proposed in this paper.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2008년도 추계 학술발표회 제20권2호
• /
• pp.581-584
• /
• 2008

본 연구에서는 판상-링형 구속시험방법의 유효성 평가를 위하여 그 특성을 국내.외에서 제안된 콘크리트 구속수축시험방법과 비교하여 간편하고 정량적인 수축균열 평가방법의 개발을 위한 기초자료를 제시하고자 하였다. 판상-링형 구속시험방법의 적정 시험체 치수를 검토하기 위하여 시험체 내부링 직경 100, 150 및 200mm, 시험체 높이 30 및 50mm에 대하여 온도 20${\pm}$3$^{\circ}$C, 습도 60${\pm}$5%의 항온항습조건에서 양생 후 마이다스 프로그램을 이용한 3D Solid 요소의 수치 해석, 건조수축변형, 구속수축응력, 균열면적 및 균열 포인트 측정 등 콘크리트의 구속수축균열 특성을 평가하였으며, 그 결과 콘크리트 링 시험체 내부 링 직경 최소 150mm이상, 높이 50mm에서 변별력 있는 평가가 가능한 것으로나타났다. 본 연구를 바탕으로 향후, 판상-링형 구속시험방법에 있어서 온도, 풍속 등의 환경조건 및 배합조건에 따른 콘크리트의 구속수축균열특성에 관한 연구가 필요할 것으로 사료된다.

• 콘크리트학회논문집
• /
• 제22권1호
• /
• pp.77-84
• /
• 2010

라텍스개질콘크리트(LMC)는 일반 콘크리트에 비하여 인장강도와 내구성 등 개선된 재료 특성을 가지고 있으며, 따라서 교량 데크 슬래브의 생애주기를 증대시키기 위하여 교면 포장재로 많이 사용되고 있다. 이러한 사용에는 LMC 포장부와 콘크리트 모반 사이의 우수한 부착성능이 전제된다. 한편 교량 데크 슬래브의 구조적 성능을 향상시키기 위하여 고성능 콘크리트(HPC) 슬래브가 현재 사용되고 있다. 이 연구에서는 일반 콘크리트(NSC) 또는 HPC 교량 데크 슬래브에 타설된 LMC 포장부의 부착거동을 모사하기 위하여, 유한요소해석을 이용한 변수 연구가 수행되었다. 이 연구에서 콘크리트 모반의 수축, 강성, 균열강도와 LMC 포장부의 두께가 콘크리트-LMC 포장부의 균열 발생에 미치는 영향을 분석하였다. 수치해석연구 결과, HPC 슬래브는 높은 수축량과 강성으로 인하여 콘크리트-LMC 교면 포장부에 균열을 유발할 가능성이 높은 것으로 사료된다.

• 전산구조공학
• /
• 제29권4호
• /
• pp.16-23
• /
• 2016

• Computers and Concrete
• /
• 제24권4호
• /
• pp.379-397
• /
• 2019

Steel-concrete composite beams are widely employed in constructions and their performance at the serviceability stage is of concern among practitioners and design regulations. In this context, an accurate evaluation of long-term deflections via various rheological concrete models is needed. In this work, the performance and predict capability of some concrete creep and shrinkage models ACI, CEB, B3, FIB and GL2000 are ascertained, and compared by using statistical bias indicators. Ten steel-concrete composite beams with existing experimental and numerical results are then modeled for this purpose. The proposed modeling technique uses the finite element method, where the concrete slab and steel beam are modeled with shell finite elements. Concrete is considered as an aging viscoelastic material and cracking is treated with the common smeared approach. The results show that when the experimental ultimate shrinkage strain is used for calibration, all studied rheological models predict nearly similar deflections, which agree with the experimental data. In contrast, significance differences are encountered for some models, when none calibration is made prior to. A value between twenty and thirty times the cracking strain is recommended for the ultimate tensile strain in the tension stiffening model. Also, increasing the relative humidity and decreasing the ambient temperature can lead to a substantial reduction of slab cracking for beams under negative flexure. Finally, there is not a unique rheological model that clearly excels in all scenarios.

• 대한토목학회논문집
• /
• 제30권4A호
• /
• pp.353-359
• /
• 2010

시멘트계 기질을 사용하는 복합재료는 재료 양생 과정에서 발생하는 건조수축 균열에 취약하다. 본 연구에서는 파이버 보강 콘크리트의 건조수축에 의한 파괴 거동을 시뮬레이션 하고, 파이버의 조건이 균열 특성에 미치는 영향에 대해 분석한다. 수치 해석 모델은 무작위 격자 형태의 기하학적 구조를 공유하는 관로 요소와 rigid-body-spring 요소로 구성되는데, 각 요소가 담당하는 비역학적-역학적 거동의 커플링에 의해 건조수축이 표현된다. 파이버 보강을 모델링하기 위해 rigid-bodyspring network 내부의 semi-discrete 파이버 요소를 적용하였다. KS F 2424 자유 건조수축 실험을 해석하고 시간에 따른 건조수축 변형률 변화를 비교함으로써 재료의 건조수축 관련 계수들을 산정한다. 다음으로 여러 파이버 혼입률에 대해 KS F 2595 구속 건조수축 실험을 시뮬레이션 하고 균열 발생 일자를 선행 실험 결과와 비교하여 해석 모델의 타당성을 검증한다. 또한, 파이버의 길이와 표면 형태를 변화시켜 건조수축 균열 해석을 수행하고 최대 균열 폭을 측정하여 시뮬레이션에서 나타나는 균열 제어 효과를 판단한다.

• 산업기술연구
• /
• 제22권A호
• /
• pp.193-200
• /
• 2002

Drying shrinkage cracking which may be caused by the relatively large specific surface IS a matter of grave concern for latex modified concrete(LMC) overlay and rapid-setting cement latex modified concrete(RSLMC) overlay. LMC and RSLMC were studied for field applications very actively in terms of strength and durability in Korea. However, there were no considerations in drying shrinkage. Therefore, the purpose of this dissertation was to study the drying shrinkage properties of LMC and RSLMC with the main experimental variables such as cement types(ordinary portland cement, rapid setting cement), water-cement ratios and curing days at a same controlled environment of 60% of relative humidity and $20^{\circ}C$ of temperature The drying shrinkage for specimens was measured with a digital dial gauge of Demec. The test results showed that the drying shrinkage of LMC and RSLMC were considerably lower with low water-cement ratio, respectively This might be attributed to the interlocking of hydrated cement and aggregates by a film of latex particles, water retention due to hydrophobic, and colloidal properties of the latexes resulting in reduced water evaporation.