• New & Renewable Energy
• /
• v.5 no.2
• /
• pp.9-14
• /
• 2009

Automobile Shredder Residue (ASR) is very appropriate in a gasification melting system. Gasification melting system, because of high reaction temperature over than $1,350^{\circ}C$, can reduce harmful materials. To use the gasification processes for hydrogen production, the high concentration of CO in syngas must be converted into hydrogen gas by using water gas shift reaction. In this study, the characteristics of shift reaction of the high temperature catalyst (KATALCO 71-5M) and the low temperature catalyst (KATALCO 83-3X) in the fixed - bed reactor has been determined by using simulation gas which is equal with the syngas composition of gasification melting process. The carbon monoxide composition has been decreased as the WGS reaction temperature has increased. And the occurrence quantity of the hydrogen and the carbon dioxide increased. When using the high temperature catalyst, the carbon monoxide conversion ratio ($1-CO_{out}/CO_{in}$) rose up to 95.8 from 55.6. Compared with average conversion ratio from the identical synthesis gas composition, the low temperature catalyst was better than the high temperature catalyst.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 1996.06c
• /
• pp.1031-1040
• /
• 1996

Spawn bottle cutting and spawn cake shredding machine has been developed to save the farm labor and operating cost for mushroom growing farmers. The prototype can cut the bottom and side of the bottle while shredding the spawn cake by one farmer. The cutting plastic shell is done by two couples of high speed disc saws that can cut cross section and lengthwise two side of the bottle, while spawn cake shredding is done by spike teethed rotating drum and wiremesh concave. The optimum speed of cutting disc saw was observed 1.700rpm both the cross cutting saw and lengthwise cutting saw in consideration of the cutting accuracy. And the location for the instalation of cross cutting disc saw was considered as around 4 mm above the table bottom , while the optimum clearance between two edges of lengthwise cutting disc saw was showed 86mm. For the sawdust spawn cake shredder , proper size of spawn sawdust granule was observed in the 15 x 15mm size withmesh concave with the shredding rum speed of 500rpm. The prototype can be reduce 73 per cent of working hours with the working cost reduction of 49 per cent compare with those of conventional operation.

• Korean journal of applied entomology
• /
• v.40 no.1
• /
• pp.23-30
• /
• 2001

Leaf Litter processing rate of Quercus mongolica was compared with that of Carpinus cordata in a first-order stream draining Mt. Jumbong in Inje-Gun, Kangwon Province. Daily processing rate (-k . day$^{-1}$ ) of Q. mongolica leaf litter in mesh bags was 0.00503, about one-third of that of C. cordata leaf litter. Forty five macroinvertebrate taxa were collected from litter bags; 39 taxi from C. cordate and 38 taxa from Q. mongolica litter bags. Nemoura tau, a precopteran shredder, was the most abundant taxon in both leaf species, and the second was the non-predatory chironomids. In terms of biomass, Gammarus, an amphipodan shredder, was the largest. and followed by Cincticostella castanea, an ephemeropteran gatherers. The biomass of most insect taxa decreased during April to June, while that of non-insect taxa greatly increased during the same time period. Gammarus was the most important shredder talon to the leaf litter breakdown in the experimental stream and appeared to prefer C. cordata to Q. nongolica leaf litter. N. tau, in spite of its abundance, seemed to have a limited effect on the leaf litter processing . Since other shredders were minor compared with these two taxa, leaf litter processing in this stream appeared to largely depend on the feeding ecology of Gammarus.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.34 no.6
• /
• pp.409-415
• /
• 2021

Medical waste management is becoming increasingly important, specifically in light of the current COVID-19 pandemic, as hospitals, clinics, quarantine centers, and medical research institutes are generating tons of medical waste every day. Previously, a traditional incineration process was utilized for managing medical waste, but the lack of landfill sites, and accompanying environmental concerns endanger public health. Consequently, an innovative sterilization shredding system was developed to resolve this problem. In this research, we focused on the design and numerical analysis of a shredding system for hazardous and infectious medical waste, to establish its operational performance. The shredding machine's components were modeled in a CAD application, and finite element analysis (FEA) was conducted using ABAQUS software. Static, fatigue, and dynamic loading conditions were used to analyze the structural stability of the cutting blade. The blade geometry proved to be effective based on the cutting force applied to shred medical waste. The dynamic stability of the structure was verified using modal analysis. Furthermore, an S-N curve was generated using a high cycle fatigue study, to predict the expected life of the cutting blade. Resultantly, an appropriate shredder system was devised to link with a sterilization unit, which could be beneficial in reducing the volume of medical waste and disposal time, thereof, thus eliminating environmental issues, and potential health hazards.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.11a
• /
• pp.288-288
• /
• 2009

Most of Static electricity forms part of our daily experience broadly. Most people have noticed from time to time electric shocks when closing of their car or after walking across a carpet, operating shredder in winter and touching a metal handle. This electrostatic discharge nuisance is normally a minor inconvenience, but in some cases static electricity can cause more serious problems. Static electricity can also be harnessed to good effect in Position Control System.

• Proceedings of the Safety Management and Science Conference
• /
• 2001.05a
• /
• pp.211-215
• /
• 2001

In the last year, the number of registered vehicles in Korea surpassed the 12 million mark, and increase in number continuously Nowdays, this tendency has raised some problems inevitably in the view of expansion of ELV(end of life vehicle) and earth environment pollution resulted from it. For the proper scope with this environment pollution, recycling of parts and materials, minimization of wastes are desirable. And application of disassembly technology is required for it necessarily. Therefore it is essential to study systematically about disassembly technology of ELV with high efficiency for improvement recycling ratio and diminution shredder dust amount also in Korea.

• Proceedings of the Safety Management and Science Conference
• /
• 2005.11a
• /
• pp.411-417
• /
• 2005

In the last year, the number of registered vehicles in Korea surpassed the 15 million mark, and increase in number continuously. Nowdays, this tendency has raised some problems inevitably in the view of expansion of ELV(End of Life Vehicles) and earth environment pollution resulted from it. A foreign country is strengthening law about a car recycling for to solve this problem. Car recycling technology in Japan was introduced in this paper.

• The Optical Journal
• /
• s.122
• /
• pp.20-21
• /
• 2009

본 통계는 2002년 1월부터 디아조(Diazo) 광디스크 파일링, 타이프 라이터, 2005년 1월부터 서류분쇄기(Shredder), 타임레코더(Time recorder)가 생산 통계에서 제외되었기 때문에 전체의 숫자에는 포함되어 있지 않다. 지면 사정상 오프셋인쇄기(생산수 출입)과 워드프로세서(수출입)의 표는 생략했지만, 사무기 전체의 숫자에는 포함되어 있다. 그리고 2007년부터 회계기(수출입)가 통계에서 제외되어 전체 숫자에는 들어있지 않다. 한편, 2007년 1월 통계부터 수출입의 복사기 카테고리가 변경되어, 지금까지 계산하지 않았던 레이저복합기(FAX, 프린터, 스캐너 기능을 탑재한 기종)를 통계에 넣었기 때문에 숫자가 종전보다 늘어났으며 정전간접식, 기타 분류는 없어졌다.

• Resources Recycling
• /
• v.12 no.4
• /
• pp.3-19
• /
• 2003

Prior to discuss on recycling status and future prospects for the non-ferrous metals in the Korea, Japan and U.S.A. respectively, worldwide resources of non-ferrous metals and characteristics with recycling of non-ferrous metals are reviewed. In case of recovery non-ferrous metals, recycling of automobile shredder dust and E.A.F. dust are illustrated. Finally, the problems and technological developments associated with recycling of non-ferrous metals are summarized.

• Proceedings of the Korean Institute of Resources Recycling Conference
• /
• 2004.05a
• /
• pp.114-118
• /
• 2004