• Journal of Pharmacopuncture
• /
• v.2 no.1 s.2
• /
• pp.27-38
• /
• 1999

It was the Study for more deep understanding about the Frozen shoulder by literature investigation. The following result were obtained. : 1. The reason of Frozen shoulder is inflamatory reaction, degeneration, continual fixing, injury, etc. 2. The symptom of Frozen shoulder is shoulder pain, night pain, limit of joint movement. 3. Frozen shoulder is classified primary and secondary types and in the oriental medicine, is classified six types by the three Yin&Yang channels of the hand 4. Jackin's exercise or codman's exercise is used for kinesiatrics. 5. $Ky\check{o}njong$(SI9), nosu(SI10), $ch'\check{o}njong$(SI11) are in commonly used acupuncture point. 6. It is used to the Tongbihanseungbang, Small-intestine jeong kyuck in SA-AM Acupuncture. 7. It is used to the TrPs of subscapularis in MPS. 8. It is used to Frozen shoulder the Sin-kwan, Sahwajung, etc. in Dong-si Acupuncture. 9. It is used the I, HO or HN to Frozen shoulder treatment in Herbal Acupuncture. 10. Using the Electro-acupuncture, we select the point according to the channels. 11. Cupping or Moxibustion is commonly used with Acupuncture. 12. Commonly used recipes are Seokyungtang, Oyacksungisan, Banhakumchultang, etc.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.23 no.6
• /
• pp.864-875
• /
• 1999

This study was done to classify type os arms and to correspond these types with partial somatotype of upper body such as lateral views of upper body shapes of shoulder. The subjects of this study were female college students of twenties 58 anthropometric and photographic data were measured. The results were as follows : 1. Form the factor analysis arm girth/armscye size factor arm length factor the slope of lower arm, arm factor the curves of armscye the roundness of arm/shapes of shoulder the slope of upper arm factor were obtained. 2. By using factor scores 4 clusters of arm types were extracted. The characteristics of these clusters were projections of armscy slant of lower arm thick-set canelike. 3. Four types of arm were corresponded with the specified lateral views of upper body directions of shoulder slopes of shoulder.

• Journal of the Korean Society of Costume
• /
• v.51 no.6
• /
• pp.167-176
• /
• 2001

This study analyzes characterization and classification of body types of Mongolian women aged 18∼39 ages. The anthropometric measurements of the research subjects come up to a total of 23 items and are summarized as follows : 1. As the results of comparative analysis of the body measurements by age group, 16 items show a significant difference except shoulder height, thigh girth, neck base girth, back length shoulder length, sleeve length and weight. Both age group are considered to be of average weight but 25 to 39 age group were slightly greater than that of the 18 to 24 age group. 2. As the results of factor analysis, 4 factors such as the first factor on the obesity of body, the second factor on the vertical size of body, the third factor on the back length, the forth factor on the shoulder width and neck base girth were extracted. 3. As the results of classification based on the duster analysis, the body types were classified into 3 types in each age group. In each age group the most frequent body type is average stature and slightly thin type.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.16 no.1
• /
• pp.13-25
• /
• 2000

Optimal Pressable Ceramic is one of the all-ceramic restorations with a shaded translucent pressed core and layering porcelains. The purpose of this study was to evaluate the marginal fidelity according to margin types and measurement sites, and to evaluate fracture strength according to margin types. Twenty seven OPC crowns made according to 3 types of cervical finishing lines were used in this study. Marginal gaps were measured before and after cementation. A Steromicroscope(SZ-ST(R), Olympus, Japan) was used to measure the space between the margin of OPC crown and the finishing line of metal model. Marginal gaps were measured at the labial, mesial, lingual and distal site, which were demonstrated in advance. Fracture strength testing was carried out using an Instron(Model M100EC, Mecmesin, England) at a cross head speed of 5 mm/min. All crowns were loaded until catastrophic failures occurred. The result were as follow: 1. In comparison according to variable margin before cementation, the marginal gap were increased in chamfer margin($47.50{\pm}18.39{\mu}m$), $120^{\circ}$shoulder margin ($55.21{\pm}14.4{\mu}m$) and $90^{\circ}$shoulder margin($71.18{\pm}13.30{\mu}m$) in ascending order, and there were significant differences between chamfer margin and $90^{\circ}$shoulder margin, $120^{\circ}$shoulder margin and between $120^{\circ}$shoulder margin and $90^{\circ}$shoulder margin respectively(p<0.05). 2. In comparison according to variable margin after cementation, the gap discrepancies were increased in chamfer margin($60.78{\pm}30.37{\mu}m$), $120^{\circ}$shoulder margin($66.67{\pm}11.18{\mu}m$) and $90^{\circ}$shoulder margin($85.78{\pm}17.23{\mu}m$) in ascending order, but there was significant difference only between chamfer margin and $90^{\circ}$shoulder margin(p<0.05). 3. Labio-lingual points showed a better marginal fidelity than that of proximal point(p<0.05). 4. Chamfer margin($48.76{\pm}8.45kgf$) showed higher fracture strength than $120^{\circ}$ shoulder margin($40.57{\pm}7.90kgf$) and $90^{\circ}$ shoulder margin(32.7.90kgf) (p<0.05), but there was significant difference only between chamfer margin and $90^{\circ}$ shoulder margin(p<0.05).

• The Journal of Korean Academy of Prosthodontics
• /
• v.36 no.6
• /
• pp.789-805
• /
• 1998

The purpose of this study was to compare the microleakage of the IPS Empress ceramic crown according to 1) margin types such as rounded shoulder and bevel, 2) margin locations such as enamel and dentine, 3) resin cement types such as Variolink and Bistite. For this study, 80 extracted premolar teeth were used. After 10 experimental dies were prepared for each group, the IPS Empress ceramic crowns were fabricated on the dies and cemented with one of two types of resin cement. After 1,000 cycles of thermal changes were given with the thermocycling unit, each specimen was sectioned with a low speed diamond saw in both the buccolingual and the mesiodistal direction. The microleakage was then measured with a stereo microscope. The obtained results were as follows : 1. Every experimental group showed microleakage. The microleakage of the crowns which had a rounded shoulder on enamel cemented with Variolink was the lowest of all. The resulting rank of the mean microleakage was rounded shoulder on enamel using Variolink(0.601mm), rounded shoulder on enamel using Bistite (0.794mm), bevel on enamel using Variolink (0.826mm), rounded shoulder on dentine using Variolink(1.054mm), bevel on enamel using Bistite(1.087mm), rounded shoulder on dentine using Bistite(1.176mm), bevel on dentine using Variolink(1.258mm), and bevel on dentine using Bistite(1.467mm). 2. The statistically significant differences in the microleakage were found in 4 cases: rounded shoulder on enamel using Variolink and bevel on dentine using Variolink, rounded shoulder on enamel using Variolink and bevel on dentine using Bistite, rounded shoulder on enamel using Bistite and bevel on dentine using Bistite, bevel on enamel using Variolink and bevel on dentine using Bistite. 3. The microleakage of rounded shoulder finish line was lower than that of bevel finish line. The statistically significant differences were found with respect to the type of finish lines. 4. The microleakage of the finish line on enamel was lower than that of finish line on dentine. The statistically significant differences were found with respect to the location of the finish lines. 5. The microleakage of the Variolink cement was lower than that of the Bistite cement. The statistically significant differences were found with respect to the resin cements.

• The Research Journal of the Costume Culture
• /
• v.9 no.6
• /
• pp.893-907
• /
• 2001

The main purpose is to study the effects of princess lines on different body types and to disguise any imperfection by using diverse princess lines. We separated testers body shapes into specific body types, H, Y by applying both the direct and the indirect measurements. These designs were evaluated by using the point ranking system method, and then average scores were obtained from these evaluations. Following are the results of the study: 1 These are the resulting illusion effects when the shoulder width of the Princess line was fixed. When the Princess line originated from 1/3 point of the armhole, body types Y appeared to show narrow waist width. A-line silhouette appeared to display the narrowest shoulder width. When the Princess line originated from 2/3 point of the armhole, body types H and Y appeared to exhibit narrowest waist widths, and the A-line silhouette once again displayed the narrowest shoulder width. When the Princess line originated from 1/2 point of the armhole, body type H appeared to exhibit narrow width; and H-line silhouette displayed the narrowest shoulder width 2. When the Princess lines waist w'4th was fixed in order to study illusion effects of waist widths. In this experiment, locations of Princess lines and widths of the skirt were varied. When the waist width was fixed at 6.5 cm, For the H body type, the Princess line location of 1/3 point of the armhole in H-line silhouette design exhibited the narrowest waist width. For the Y body type in A-line silhouette design, the Princess line locations of 1/3 and 1/2 points of the armhole exhibited the narrowest waist width because it displayed the hourglass effect. When the waist width was fixed at 10 cm, H body type did not exhibit any significant differences between designs. For Y body type, A-line silhouette design with the Princess line origination point at 1/3 down the armhole exhibited the narrowest waist width. 3. The illusion effects of the hip were studied by fixating the width of the skirt and varying the locations of Princess line and waist widths. In H-line skirt silhouette designs, all two body types exhibited narrow hips when the Princess line origination points were at 1/3 and 1/2 way down the armhole. For A-line skirt silhouette, H body type exhibited narrow hips when narrow waist design with the Princess line originating from 1/2 point in the shoulder was shown. Y body type exhibited narrow hips when narrow waist design with the Princess line originating from 1/3 point of the armhole and 2/3 point of the shoulder. 4. With both waist and skirt widths fixed, all two body types exhibited taller and slender postures when the Princess line originated from the shoulder compare to the armhole.

• Journal of the Korean Home Economics Association
• /
• v.33 no.5
• /
• pp.211-219
• /
• 1995

In this study of the Buddhist Stone Statues in Namsan in Kyungju. We have found out interesting facts as follow. This study is focused on the way the Buddhist Statues wear the robes. There are two basical types of wearing ; Tongkyun and Pyundanwookyun. In Silla, these types of wearing has been developed into its unique types based on the traditional culture. The stone Buddhist images show seven types of wearing based on the standard ones of Tongkyun and Pyundanwookyun. This variety in wearing rests on the various of Sungkari(Samghathi) and Bokgyenui(Samkaksika) and a chest sash which fixes Niwonsung(Nivasana). There are three cases inferred from the seven types of wearing the Buddha's robes : (1)Tonkyun type A: The only outer wear Sungkari(Samghathi) was put on as Tongkyun type. We can't find out any Bokgyenui(Samkaksika) or the chest sash of Niwonsung(Nivasana). (2)Tongkyun type B: Bokgyenui(Samkaksika) is put on the chest of Statue in Sungkari(Samghathi). (3)Tongkyun type C: This type is similar to Tonkyun type A, except that the end of the robe dangled down straight to the right side. (4)Tongkyun type D: Bokgyenui(Samkaksika) is bound with a chest sash. (5)Tongkyun type C: The robe is tied on the left shoulder as a cord and Bokgyenui(Samkaksika) is bound with a chest sash. (6)Pyundanwookyun type A: The robe dangled down from the left shoulder to the right armpit diagonally, so left shoulder is naked. (7)Pyundanwookyun type B: This type is similiar to Pyundanwookyun type A, but the end of Sungkari(Samghathi) is bound up to the left shoulder again. Considering above, the robe types of Buddha seem to have something to do with those of the Silla people: The chest sash is similar to the adjustment of Jeogori(the traditional jacket) of the Silla, and the typing cord in Buddha's robe corresponds to that of the traditional types.

• Journal of Acupuncture Research
• /
• v.35 no.4
• /
• pp.169-175
• /
• 2018

The objective of this study was to review clinical trials of pharmacopuncture treatment for Frozen Shoulder and to evaluate trends in this field. The literature search was performed using PubMed, the Cochrane Library, China National Knowledge Infrastructure, and 5 Korean electronic databases. A combination of "pharmacopuncture," "acupoint injection," "Frozen Shoulder," "adhesive capsulitis," and "periarthritis of shoulder" search terms were used. A total of 9 studies were included in this review. The studies were classified into herbal extract-based (5 types) and animal-based (2 types) pharmacopuncture treatment of Frozen Shoulder. There were 14 different acupoints and Ashi points used in the 9 studies. The total volume of herbal extract-based pharmacopuncture injected was usually between 2 mL and 4 mL, and for animal-based pharmacopuncture it was 1 ml. In most studies of Frozen Shoulder, pain was reduced and function was significantly improved after pharmacopuncture treatment. These results demonstrate that pharmacopuncture alleviates pain and restores function in patients with Frozen Shoulder. Further studies must be conducted on pharmacopuncture for management of Frozen Shoulder.

• The Journal of Korean Academy of Prosthodontics
• /
• v.35 no.3
• /
• pp.445-457
• /
• 1997

Poor marginal fidelity resulting in a large marginal gap increases plaque accumulation, gingival inflammation and dental caries. The purpose of this study was to evaluate the marginal fit of three different cervical finishing methods of prepared teeth. A stereomicroscope was used to measure the space between the margin of restoration and the finishing line of prepared tooth. The results were statistically analyzed using the ANOVA and Multiple Range Test(Tukey's HSD). The results were as follows : 1. There were no significant differences concerning the types of tooth and positon (P>0.05), whereas the differences were statistically significant in case of cervical finishing methods (P<0.05). 2. There were statistically significant differences between before and after cementation (P<0.05). 3. In comparison according to variable margins after cementation, the gap discrepancies were increased in $130^{\circ}$ shoulder margin, chamfer margin and $90^{\circ}$ shoulder margin in ascending order, and there were significant differences between $90^{\circ}$ shoulder margin and chamfer, $130^{\circ}$ shoulder margin 4. In comparison according to variable margins, the gap discrepancies were increased in chamfer margin, $130^{\circ}$ shoulder margin and $90^{\circ}$ shoulder margin in ascending order, and there were significant differences between $90^{\circ}$ shoulder margin and chamfer, $130^{\circ}$ shoulder margin. 5. This study demonstrated a better marginal fit with all-ceramic crowns fabricated on chamfer and $130^{\circ}$ shoulder margin compared with $90^{\circ}$ shoulder margin.

• Journal of International Academy of Physical Therapy Research
• /
• v.11 no.4
• /
• pp.2173-2177
• /
• 2020

Background: Shoulder horizontal abduction in the prone position (SHAP) has been reported as an effective exercise to strengthen the lower trapezius. However, the effects of pre-emptive scapular posterior tilt on scapular muscle activity and scapulohumeral movements during SHAP have not been examined. Objectives: To examine the effect of the addition of scapular posterior tilt on muscle activity of the trapezius and posterior deltoid, and scapular posterior tilt and shoulder horizontal abduction, during SHAP. Design: Cross-sectional study. Methods: Fifteen healthy male subjects performed two types of SHAP: general and modified SHAP (SHAP combined with pre-emptive scapular posterior tilt). To perform modified SHAP, pre-emptive scapular posterior tilt training was performed prior to the modified SHAP. Muscle activity of the middle and lower trapezius and posterior deltoid, and the amount of scapular posterior tilt and shoulder horizontal abduction, were measured during two types of SHAP. Results: Muscle activity of the lower trapezius and scapular posterior tilt was significantly increased during the modified SHAP, while muscle activity of the posterior deltoid and the amount of shoulder horizontal abduction were significantly decreased. However, the middle trapezius muscle activity did not change during the modified SHAP. Conclusion: The SHAP with pre-emptive scapular posterior tilt can be useful to strengthen the lower trapezius.