• 한국의류학회지
• /
• 제15권2호
• /
• pp.127-138
• /
• 1991

The aim of the present stud)r has been to obtain new and additional data allolwing a better design of sports garments as well as a better choice among some materiales, through measure-ment of body surface changes in the upper trunk in movement, measurement on the effects of local heating on other parts of the body and measurement of the thermal resistance of 6 types of materials applied on a manikin. In the first experiment, the upper trunk was divided in 32 Parts, the surface of which was measured by the tape method for two upper limb positions: extension at $90^{\circ}$ and $180^{\circ}$. In the second experiment, skin temperature, local thermal sensations and whole body thermal sensation were measured every 5 minutes during 40 minutes. The four areas of the shoulder, abdomen, hande and feet were heated with the hot pack at $50^{\circ}C$. In the third experiment, the regional thermal resistance of the various materials selected, in two different cases of clothing ease, have been measured by using a thermal manikin. Resultes of experiments were: 1. Extensions cause the upper front part of the trunk surface to lengthen vertically while the back tends to stretch in width. 2. Skin temperatures of the upper limbs are influenced by the abdomen and shoulder boatings. The correlation between the whole body thermal sensation and the upper trunk thermal sensation is significantly asserted. 3. Ceramic and aluminium coated materiales offer the most effective thermal resistance; ease in clothing increases the thermal resistance at the breast and the abdomen as well as the clo value of the materials.

• 대한통합의학회지
• /
• 제12권2호
• /
• pp.47-53
• /
• 2024

Purpose : This study investigated the effects of concentric and eccentric contractions on muscle strength using an isokinetic dynamometer (ID) in college students in their 20s. It aimed to understand the impact of differences between the dominant and non-dominant sides on strength asymmetry and to elucidate the clinical implications of these differences to establish an appropriate posture and environment for patients. Methods : The experiment was conducted with 30 healthy adult participants. Prior to the experiment, participants underwent a warm-up targeting the shoulders, and efforts were made to eliminate factors that could potentially influence the measurement results. Subsequently, the maximum safe range of motion of shoulder joint abduction, extension, and flexion was measured using an isokinetic muscle function testing device. Muscle strength was assessed using concentric and eccentric contractions alternating between the dominant and non-dominant sides, and paired sample t-tests were used for the analysis. Results : There was no significant difference between bilateral peak torques for eccentric contraction in shoulder joint abduction, extension, and flexion (p>0.05). There was also no significant difference between bilateral peak torques for concentric contraction in shoulder joint abduction, extension and flexion (p>0.05). Conclusion : This study found no statistically significant difference in muscle strength between the dominant and non-dominant sides during concentric and eccentric contractions. However, previous studies have shown significant differences between the dominant and non-dominant sides during eccentric and concentric contractions during internal shoulder rotation in the general population, as well as significant differences in the upper trapezius muscle. Therefore, further research is needed to support the application of different intensities for bilateral muscle strengthening exercises in clinical practice.

• 한국의류학회지
• /
• 제29권5호
• /
• pp.703-714
• /
• 2005

The purpose of this study is to acquire various methods for the fashion image coordination and to examine common features of variation of coordination methods according to the trend. It has attained by investigating Men's fashion image coordination through trend analysis in terms of its coordination features and its variety aspects. For this study, it has classified into twelve typical Men's fashion images in collecting 1,291 pieces of photographs on the subject of jackets and pants from Men's fashion collection$(1995\~2002)$. The study has examined methods and features of fashion image coordination by year according to design elements and the harmony between items. In addition, it has drawn common factors in the image coordination. The summary and conclusion are as follows. A year of 1995, it has presented as the essential code of the variation that morphologic aspects of a design in the fashion image coordination. Various designs have developed through the variation of shapes such as shoulder width, shoulder pad, jacket width and its length and so on. In the initial stage, the width of shoulder and jacket has fitted into large pattern and then adjusted elegantly to make fit the body that indicates a dissolution according to an avant-garde image. At the time that over-measurement of the shape has reduced and high quality and variation of materials has gradually become significant. Those are often used that high-quality glossy materials or other materials which are opposite to the basic code of the original fashion image materials and qualities regardless of images. On the pattern and color, in addition, have represented neat and elegant impression with moderate applications rather than quantitative abundance that have used opposite elements to the basic code f3r the change code like materials. Furthermore, before and after 1999, ' it shows that a concept of the total coordination has arisen that increased coordination methods to strengthen and affluent its images for the whole with wearing accessaries such as hats, gloves, sunglasses, mufflers, bags, belts and so on.

• 대한가정학회지
• /
• 제19권3호
• /
• pp.21-32
• /
• 1981

Clothing must have the individual beauty and the function that one can do one's body movement freely. therefore, from the human engineering view point, the exact measurement of the human body and the analysis of it's results must be applied to clothing because the arm works most. In this study, the skin surface of arm was investigated by shell made of Alginate of each movement. And by sometic method the rate of expansion and contraction of each section, inter-relation among the bust girth, axillary arm girth and scye girth and between the shoulder length right and the under axilla waist length were calculate4d. With these results, cap height, breadth of a sleeve and arm hole girth of existing sleeve pattern have been compared and analysed. The results are as follows; 1) According to the developmental figures of shell, the whole area change was small but that of shape was remarkable in M 4, 9, 13. The change of the Block 1 was particular. 2) Over arm length was contracted in all movements except M6 and under arm length expanded. The changes of sections a, b, c are large, while those of sections d, e are small. 3) In terms of latitudes, change of fore-arm region was small. The rate of scye girth varied from 14.3% of M13 to-5.6% of M2. The breadth of a sleeve expanded in all movements, and especially the front region expanded more than the back. 4) The relation between the shoulder length right and under axilla waist length, in all occasions, was contracted mutually, and one contracted, the other expanded. Therefore, in clothing construction when we consider the function of the arm it is better to widen the arm hole and the breadth of a sleeve at the same time than no widen the shoulder length by lowering the upper part of the upper side seam line.

• 한방재활의학과학회지
• /
• 제27권3호
• /
• pp.125-136
• /
• 2017

Objectives The present study was designed to analyze the posture pattern of healthy right-handed male and to investigate the effect of Chuna treatment. Methods Twenty healthy right-handed male were selected in this study. Body posture was measured by Body $Style^{(R)}$. After that, subjects received Chuna treatment on lumbar and pelvis area. Finally, the 2nd measurement was carried out. Results In shoulder height, left shoulder was higher than right one. In pelvic height, right iliac crest was higher than left, followed by longer right leg than left. In lower limb angle suggesting valgus or varus knee. In height of scapula inferior angle, right seemed higher than left. After the Chuna treatment, shoulder height, pelvic height, and leg length difference showed significant improvement. Other variables showed improvement but it was not significant. Conclusions These results suggest that right-handed male have some characteristic posture pattern because of their daily life habits, and Chuna treatment can be effective in correcting bad posture.

• PNF and Movement
• /
• 제16권1호
• /
• pp.133-141
• /
• 2018

Purpose: This study examined the effect of proprioceptive neuromuscular facilitation (PNF) rehabilitation exercise on postoperative range of motion (ROM), pain, and function of breast cancer patients. The purpose of this study was to provide fundamental data regarding the use of PNF rehabilitation exercise for patients with breast cancer. Methods: Fourteen patients who underwent surgery due to breast cancer were randomly divided into an experimental group (n=7) that performed PNF rehabilitation exercise and a control group (n=7) that performed general rehabilitation exercise. Both groups performed the respective exercises for 30 minutes, five times a week for 4 weeks. For the measurement of ROM, the range of shoulder abduction was measured using a clinometer smartphone application. The shoulder pain and disability index (SPADI) was used to measure the level of pain and functional activity. A paired t-test was conducted to compare within-group changes before and after the PNF rehabilitation exercise. Differences between the experimental group and control group were analyzed by an independent t-test. For all tests, the level of statistical significance was set at ${\alpha}=0.05$. Results: After the exercise, there was a significant within-group change in the ROM and SPADI in both the experimental group and control group (p<0.01). There was also a significant between-group difference in the ROM and SPADI after the intervention (p<0.05). Conclusion: Rehabilitation exercise is generally applied as a treatment for patients with breast cancer after surgery and is relatively effective. The application of PNF rehabilitation exercise may be useful in such patients, considering its effects on ROM improvement, pain reduction, and functional enhancement.

• 한국의류산업학회지
• /
• 제5권3호
• /
• pp.235-243
• /
• 2003

This study is to figure out where the current satisfaction with ready-to-wear clothes based on middle-aged women's body shapes is at and to propose basic considerations in its production for coming up with a better sizing system to maximize customer's satisfaction. The data obtained from measurement and questionnaire by 126 middle- aged (35-59) women which were located in Gwangju. Followings are summary of this research, 1)The satisfaction level with lower -wear is relatively lower-wear than that of upper-wear in most parts of body. 2) The results by way of putting score show three different groups. Group 1 has characteristics of front body silhouette in the small ratio of shoulder width/bust width, shoulder width/waist width and big ratio of shoulder width/hip width. And Group 3 has characteristics of front silhouette, small ratio of hip girth/thigh girth. Group 2 has a standard shape. 3) The satisfaction level with lower-wear based on middle-aged women's body shapes shows slight difference. In this category, Group 2 has higher satisfaction level than that of Group 1, while Group 1 has better shape than Group 3. 4) The items of clothes which should be considered current less satisfaction on their size and pattern are skirt and pants. In the meantime, specific body parts for the same criteria are hip girth, thigh girth. And the 43.7% of middle-aged women who responded to this study requires improvement on the fit of lower-wear.

• 한국의류학회지
• /
• 제15권4호
• /
• pp.393-403
• /
• 1991

The purpose of this study were to explain the difference in body dimensions and body shape between the early in the twenties and the late in the twenties and to get information clothing construction. Subject were 483 Korean males, which were extracted from men's physique investigation on June to August in 1989, consisted of 149 aged $19\~24$ and $25\~29$. T-test and factor analysis were applied to 52 measurement items and 58 indices. The Result of the study were as follow; 1. As regards $19\~24$ aged group, they were taller their waistband level was higher than the late in the twenties. Upper arm and thigh were thick in comparison with trunk. As the difference between shoulder and waist in dimension was great, they showed reverse triangular silhouette. As regard $25\~29$ aged group, their body from variation between individual was greater than that of 19~24 aged group and they were obese on mainly waist and abdominal parts. For that reason, waist band level became low and their shoulder and hip looked slim relatively that reason, waist band level became low and their shoulder and hip look slim relatively to bust and waist parts. 2. Between $19\~24$ aged and $25\~29$ aged groups, as each had charicteristic body from, there was the difference in factor structure. 3. The change of men's body from with age in their twenties was obeseness on the whole body but the increasing rate of upper arm and thigh girth was less than that of trunk girth.

• 한국컴퓨터정보학회논문지
• /
• 제23권11호
• /
• pp.111-122
• /
• 2018

The purpose of this study was to investigate the bodice prototype method suitable for the upper body shape of old-old aged women using the 3D anthropometric data. And it was to provide the basic data for the upper body garments of old-old aged women. In the overall appearance evaluation, the B pattern was rated as 4.00, and it was evaluated as the most suitable for the bodice prototype of the old-old aged woman. The E pattern was rated lower than normal, and the L pattern and the S pattern were found to be inadequate for older female bodice prototypes. As a result of the measurement of the waist and bust air gap of bodice prototype, the air gap of the bust was not significantly different between the patterns. But the waist air gap showed the largest difference between the L pattern and the S pattern. As a result of evaluating the appearance, the amount of space in the state of 3D simulation, and the air gap, the pattern B appeared to be the most appropriate prototype for the old-old aged women's body shape. However, there is a tendency that the shoulder end point is biased toward the back, so it is necessary to set the inclination of the back shoulder line to be more gentle. Conversely, the front shoulder should be more inclined. In the case of the 3D simulation, the B pattern showed that the other parts generally fit well. In the case of the 3D simulation program used in this study, it was evaluated that it is suitable only for the normal body shape because it is impossible to set the isometric angle which is one of the characteristics of the older female body shape. A study on the bodice prototype suitable for the bent body shape should be carried out through experiments on the actual body shape of various elderly women. In order to cope with the increase of elderly people who are familiar with digital, I think it is necessary to develop an avatar that reflects the old female body shape.

• 대한안전경영과학회지
• /
• 제15권4호
• /
• pp.123-129
• /
• 2013

Among various manual materials handling tasks, pushing/pulling was known to be one of the risk factors for the low back and shoulder musculoskeletal disorders (MSDs). This study was conducted to find out an optimal solution set of the handle height and distance for 4-wheel cart with two vertical handles. Ten male college students participated in the pushing force measurement experiment. The face-centered cube design, one of the central composite designs, was applied for the experiment, and the isometric voluntary pushing force was measured in 9 treatment conditions. The second order response surface model was predicted by using the pushing strength as a response variable, and the handle height and distance as independent factors. According to the 2nd order response model, the handle height and distance showed nonlinear relationship with the isometric pushing strength. To maximize the 2nd order response model (pushing force), the handle height and distance were optimized. The optimal handle height was 'xyphoid process height - stature', and the optimal handle distance was '$1.25{\times}shoulder$ width'. When calculated using the anthropometric data of the subjects of this study, the optimal handle height was $115.4{\pm}3.4$ cm, slightly higher than the elbow height, and the handle distance was $52.9{\pm}2.3$ cm.