• 복식
• /
• 제40권
• /
• pp.81-93
• /
• 1998

It is necessary to research shape of the breast of girls at adolescence for developing well-fit brassiers. 313 participants reside in Chonju and Kunsan were gathered for body measurement. The conclusion of this study can be summarized as follows. 1) The Analysis of Body Shape by Measurement. Comparing Age GroupⅠ(aged 10 to 12)' measurement with Age GroupⅡ(aged 13 to 15)', Each items has statistical significance. Two groups differed in the length, girth, depth, width items. 2) Factor Analysis of Body Measurement (1) Age GroupⅠ'characteristics were categorized Three Factor : Breast size and breast apex length. Breast volume, Length of the Breast part. (2) Age GroupⅡ' characteristics consist of four factors, which are named as breast size and its jut (first factor), breast volume (second factor), contour of breast profile & its jut (third factor), shoulder length (fourth factor). 3) Characteristics of Breast Shape. (1) Breast shapes of Age GroupⅠ are classified into three types. Types 1 is a protruded and more voluminous shape. Type 2 is the most voluminous and breast fatness is highest. Type 3 is the smallest and flat shape growing now. (2) Breast shapes of Age GroupⅡ are also classified into three types. Type 1 is the longest in length and middle in fatness, voluminous in size. Type 2 is the smallest in stature and the slimmest in fatness in breast shape. Type 3 is middle in length, the fattest and the most voluminous in breast.

• 한국전문물리치료학회지
• /
• 제17권2호
• /
• pp.10-16
• /
• 2010

This study was undertaken to develop the scapulometer, a measuring tool for scapular winging, and to determine the reliability of scapulometer. Thirty subjects with scapular winging greater than 2 cm participated in this study. Two examiners measured scapular winging using the scapulometer. Standardized measurement position of each subject was as follows: neutral position of shoulder and wrist, $90^{\circ}$ flexion of elbow, and cuff weight of 5% and 10% of body weight (BW) to neutral wrist. The interrater and intrarater reliability were calculated with an intraclass correlation coefficient (ICC) with 95% confidence interval (CI) and standard error of measurement (SEM) at 5% BW and 10% BW. The level of scapular winging was tested between 5% BW and 10% BW with a paired t-test. The interrater reliability was shown to be high at 5% BW (ICC(2,k)=.955, 95% CI=.900~.979, SEM=.07) and at 10% BW (ICC(2,k)=.968, 95% CI=.930~.985, SEM=.06). The intrarater reliability was shown to be high at 5% BW (ICC(2,k)=.921, 95% CI=.842~.961, SEM=.09) and at 10% BW (ICC(2,k)=.906, 95% CI=.813~.954, SEM=.10). The level of scapular winging was significantly different between 5% BW and 10% BW. Conclusively, it is demonstrated that the scapulometer is an objective and qualitative measurement tool for scapular winging.

• 한국생활과학회지
• /
• 제11권3호
• /
• pp.307-319
• /
• 2002

We studied on the development of clothing pressure measurement system for wear comfort of foundations(girdle, brassiere, all-in-one). Measurements of clothing pressure were made on subjects wearing girdles, brassieres, all-in-ones of several type(material, size) using by CPMS(clothing pressure measurement system: Tech-Storm. Co). Wearing experiments have been carried out using nine women in the twenties and six women in the forties. The results obtained are as follows: 1. The clothing pressure applied by girdle was higher in the hard type than the soft type by $5-10gf/cm^2$, also recorded a high clothing pressure at points of waist band line and thigh lateral. 2. Clothing pressure of brassiere with wire was high at the point of underbust line and shoulder strap. Pressure for 40s showed higher than 20s by $6-7gf/cm^2$. 3. The pressures of abdominal part applied by both of girdle and all-in-one were much greater than those of girdle or all-in-one. 4. We demonstrated the adaptability and conformity of the CPMS by inquiring into the clothing pressure of various foundations.

• 한국의류산업학회지
• /
• 제4권1호
• /
• pp.71-78
• /
• 2002

The purpose of this study was to classify body types of 800 female junior and high school students based on factor analysis, cluster analysis, and correspondence analysis of 15 photometric measurements of the subjects' lateral body lines. The results are as follows: The skeleton structure, which was represented the back bending by the photometric measurement, was already formed at age of 12 or 13, while the cervical skeleton, the size and inclination of the shoulder, and the degree of the lateral inclination of the upper body and the buttocks continued to grow by the age of 16. A factor analysis of the photometric measurement resulted in the sampling which determined the degree of the back bending, front-bust angle, and lateral view as well as the sampling whose factor represented the cervical inclination. A cluster analysis of the photometric measurement resulted in the four types of classification: Type 1, the straight type comprising 13.3% of the whole population; Type 2, the bent-forward type comprising 39.5%; Type 3, the lean-back type comprising 27.4%; and Type 4, the swayback type comprising 19.1%. Accordingly, the bent-forward type was found to be the dominant type among the four lateral body types.

• 한국의류산업학회지
• /
• 제2권4호
• /
• pp.353-359
• /
• 2000

The purpose of this study was to develop the jacket pattern drafting method for Korean middle-aged women. The study was composed as follows : 1. Body measurement and statistical analysis : Two hundreds and forty four middle-aged women between the ages of forty five and fifty nine were measured on 52 items. 2. Development of new jacket pattern drafting method : Measurement items necessary to draft new jacket pattern were back waist length, bust girth, waist girth, hip girth, back interscye breadth, front interscye breadth, neck base girth, nipple length, nipple to nipple breadth, 1/2 posterior shoulder length and sleeve length. Basic jackets constructed from the experimental patterns were examined through the fitting test. 3. Evaluation of the new pattern drafting method : The sensory evaluations for appearance and comfort were applied to evaluate the new jacket pattern by comparing it with one of the conventional jacket patterns (Lee Hyung-Suk's). According to the result of sensory evaluation, the new jacket pattern was more positive.

• 한국의상디자인학회지
• /
• 제20권3호
• /
• pp.15-26
• /
• 2018

The purpose of this study is to understand the characteristics of body types of adult woman under 155cm in height. To do this, direct measurement data showed that only 660 women aged 20~69 years old and under 155cm tall were classified, and their body type characteristics were analyzed. There are 51 body measurement items used in the analysis. The results of the study are as follows: As a result of the comparison of the body size of all adult women and women under 155cm, it was seen that short women were smaller than the all women, and were flattened with a slightly plump and bendless body. Factor analysis was performed to classify the body type of short women. Six factors including body size, body height, shoulder length and width, waist back length, hip length, and shoulder angle were measured. The results of cluster analysis, using factor scores, were classified into three types. Type 1 is taller among short women and slightly slimmer, and is an A-shape. Type 2 has the largest BMI and was the middle stature among short women It is the most obese body type and is an H-shape. Type 3 is short and plump, with a poor hip and is a Y-shape. As a result of crossover analysis, there was a difference in the body type characteristics of each age group. After all, the body type of the short adult women under 155cm was clearly different from those of all adult women, there was also a difference in the body type among short adult women.

• 대한가정학회지
• /
• 제20권3호
• /
• pp.9-18
• /
• 1982

In this study, we attempted to make an original pattern of clothing for an abnormal type of figure, especially for the type of kyphosis. We measured the curvature of the spine of a woman with kyphosis with a Martin measuring instrument and a silhouetter in the following ways. First, we counted the rate of shrinkage of the standard lines drawn on the surface of the body according as the body moved. Secondly, placing the front and back darts, the front and back shoulder darts and the side darts according to“Munhwa”pattern, we made cubic cuttings of four moving postures as well as the standing one. Thirdly, we superposed the developed patterns of the standing and the moving postures, measuring the position change and the amount of the chaange of the darts, and compared them. The results are as follows: 1) In the developed pattern of a cubic cutting of the basic pattern and the standing posture, the neckhole became larger than that of the basic pattern, and the waist line was lowered than that of the basic pattern because the center back line was shortened due to the curved backbone. 2) As for the change of the standard line according to the movement, we found that the waist line, the center front line, the center back line, the bust width line, the upper back width line and the back width line became longer. Special consideration must be given to the function of the clothing for an abnormal type of figure. 3) The difference of the measurements between the cubic cutting and the body measurement regardless of the body movement is due to a gap by an acute angle at the jutted place between the developed pattern and the body surface. We found that the body measurement of the upper back width line, the back width line and the bust line became larger. Consequently, in making an original clothing pattern, it is desirable that we must not place the front and the back waist darts at the jutted place on the back from the functional and the aesthetic viewpoint of clothing. It is also desirable that we must widen the neckhole because the shoulder angle is close to a straight line due to a jut of the upper back width line.

• 대한추나의학회지
• /
• 제2권1호
• /
• pp.133-142
• /
• 2001

Objectives : The aim of this study is to investigate the relationship between spinal distortion and pain in elementary and middle school students. Methods : Using the phase-shifting moire developed by KAIST(Korea Advanced Institute of Science and Technology) we measured the back surface distortion, and using questionnaire investigation, we investigated the partial pain in 1008 elementary and middle school students(532 boy students(52.8%), 476 girl students(47.2%)) in Seoul in 1999. And, we statistically analyzed the relationship between spinal distortion and partial body pain Results : This study show that the more age increase, the more the pain in head, neck, shoulder, back and low back Increase considerably among the students aged 9 to 15. The ratio of each partial body pain was 28.4%, 19.7%, 18.2%, 18.7%. 16.0% at the age of 9 and 59.7%, 67.4%, 51.8%, 51.8%, 64.4% at the age of 15 respectively. And, it was shown there was a significant correlation between spine distortion and partial body pain area. When the spinal distortion was found at the upper thoracic and cervical area, the students complained the more pain on head, neck and shoulder(p<0.05) and when the spinal distortion was found at the sacral base, the more headache(p<0.05) Conclusions : It is suggested that the significant correlation exist between the spinal distortion and pain and the pain related to spine disorder get more increase as students grow. We have to study further more about Juvenile postural distortion and it's prevention.

• 패션비즈니스
• /
• 제5권1호
• /
• pp.17-33
• /
• 2001

The purpose of this study is to offer the basic data for chinese men' clothing construction. This study analyzes characterization and classification of body types of the Chinese men with body measurement values. This researcher executed the body measurement of total 39 items on 414 chinese men in Beijing and Shanghai aged 20-49 years old and analyzed the data with methods of analysis of variance, factor analysis and cluster analysis using it as the study item. The results of this study can be summarized as follows; 1. As the result of comparative analysis of the body measurements by age group and birth region group in Beijing and Shanghai, the horizontal items such as the widths, depths, and girths increased with advancing ages, while heights decreased. 2. As the result of factor analysis on the items in Beijing and Shanghai, 5 factors on such as the first factor on the obesity of body, the second factor on the size of vertical of body, the third factor on the length of upper body, the forth factor on the width of the shoulder, the fifth factor on the degree of dropping shoulder were extracted. 3. As the result of classification based on the cluster analysis in Beijing, the body type were classified into 3 types. So, to see the feature of body form by types, type 1 was tallest, fattest type. type 2 was small stature, fat. type 3 was tall, thin. In Shanghai, he body type were classified into 3 types. So, to see the feature of body form by types, type 1 was tallest, fattest type. type 2 was small stature. type 3 was tall, thin.

• 패션비즈니스
• /
• 제4권4호
• /
• pp.83-96
• /
• 2000

The purpose of this study is to offer the basic data for chinese men' clothing construction. This study analyzes characterization and classification of body types of the Chinese men with body measurement values. This researcher executed the body measurement of total 39 items on 414 chinese men in Beijing and Shanghai aged 20-49 years old and analyzed the data with methods of analysis of variance, factor analysis and cluster analysis using it as the study item. The results of this study can be summarized as follows; 1. As the result of comparative analysis of the body measurements by age group and region group, the horizontal items such as the widths, depths, and girths increased with advancing ages, while heights decreased. 2. As the result of factor analysis on the items, 5 factors on such as the first factor on the obesity of body, the second factor on the size of vertical of body, the third factor on the length of upper body, the forth factor on the width of the shoulder, the fifth factor on the degree of dropping shoulder were extracted. 3. As the result of classification based on the cluster analysis, the body type were classified into 5 types. So, to see the feature of body form by types, type 1 was small stature, short parts of the body. type 2 was tallest, fattest and type 3 was small stature, fat. type 4 was tall, long length arm and leg, thick waist. type 5 was tall, long length arm and leg, fat.