• 복식
• /
• 제50권5호
• /
• pp.117-130
• /
• 2000

The purpose of this thesis is to offer basic data for clothing design which is intended to apply appropriate shape and capacity to clothes. The following are the analyzed results of an investigation which was conducted to characterize the upper half of the female body of 193 women whose ages are 18 to 25, taking part in this investigation. According to the results of analyzing young women's bust, I came to find a large individual difference of the wide varying factor numbers at the items of the side feature, the body stance, and the dart quantity. For the analysis of the female's upper body, 11 factors are used. The are as follows: Factor 1. width of the bust Factor 2. height of the bust and length of the arm Factor 3. side thickness of the bust and the upside type Factor 4. length of the bust on the front Factor 5. length of the bust on the back Factor 6. salient ratio of the breast Factor 7. width of the neck. the armhole, and measurement of the droop Factor 8. length of the shoulder Factor 9. flat ratio of the bust Factor 10. inclination of the shoulder factor 11. form of the back The shape of young women's upper bodies can be divided into four groups. The character ization of each group are as follows : Group 1 . 28.5% of the women who take part in this investigation belong to Group 1 These women have the shortest body, with a longer length of the front than the back and more thickness on the front than the back. Group 2. 21.1% of the women who take part in this investigation belong to this group. They show a longer length of the back and more thickness of the back than the front. In addition, this group is bent forward. Group 3. This group is the mast common type, showing the shortest and thickest character. 37.8% of the women who take part in this investigation have this bust character Group 4. 12.4% of the women belong to Group 4. They possess the highest and fattest character, skewing smaller necks, armholes, and waists than the other groups. This group also shows the drooping shoulders.

• 한국마린엔지니어링학회:학술대회논문집
• /
• 한국마린엔지니어링학회 2002년도 춘계학술대회논문집
• /
• pp.153-160
• /
• 2002

This paper shows the possibility of performing Lap joint using the friction stir welding and the determination of tool's dimensions for FSW in Milling machine. This research also is reported on obtaining the tensile-shear strength, 9.319 ( kgf/mm$^{2}$) and the energy absorption, 2,682 (kgf-mm) under this experiment. The optimal tool's dimensions and method for Lap joint in 2tmm aluminum alloy plate using FSW is as follows; The diameter of shoulder and pin are 9 $\phi$mm and 3$\phi$mm, the length of pin is 3.6mm. The conditions of shoulder of tool is not pressed into original base metal.

• Clinics in Shoulder and Elbow
• /
• 제21권4호
• /
• pp.192-199
• /
• 2018

Background: The currently available reverse shoulder arthroplasty (RSA) designs can be classified into medial glenoid/medial humerus (MGMH), lateral glenoid/medial humerus (LGMH), and medial glenoid/lateral humerus (MGLH) prosthesis designs. The purpose of this study was to radiologically analyze the effect of different RSA designs on humeral position following RSA. Methods: A total of 50 patients who underwent primary RSA were retrospectively analyzed. Among 50 patients, 33 patients (group A: MGMH) underwent RSA with Aequalis system (Wright, Inc, Bloomington, MN, USA), 6 (group B: LGMH) with Aequalis system using bony increased offset, and 11 (group C: MGLH) with Aequalis Ascend Flex system. The acromiohumeral distance, acromioepiphyseal distance (AED), lateral humeral offset (LHO), LHO from the center of rotation ($LHO^{COR}$), and deltoid length were radiologically measured to quantify the distalization and lateralization of the humerus. Results: The increment in postoperative AED was $19.92{\pm}3.93mm$ in group A, $24.52{\pm}5.25mm$ in group B, and $25.97{\pm}5.29mm$ in group C, respectively (p=0.001). The increment in postoperative LHO was $0.13{\pm}6.30mm$, $8.00{\pm}12.14mm$, and $7.42{\pm}6.88mm$, respectively (p=0.005). The increment in postoperative $LHO^{COR}$ was $20.76{\pm}6.06mm$, $22.04{\pm}5.15mm$, and $28.11{\pm}4.14mm$, respectively (p=0.002). Conclusions: The radiologic analysis of the effect of different RSA designs on humeral position following RSA showed significant differences in the increment in postoperative AED, LHO, and $LHO^{COR}$ between the 3 groups. Therefore, MGLH design seems to be more effective for humeral distalization and lateralization compared to original Grammont design.

• 대한견주관절학회:학술대회논문집
• /
• 대한견주관절학회 1995년도 학술대회
• /
• pp.13-13
• /
• 1995

The authors performed the arthroscopic decompression and cuff debridement on 47 cases in 45 consecutive patients with either stage II or stage III impingement syndrome from July 1990 to January 1994. The summarized results are as follows. 1. 47 cases in 45 consecutive patients had arthroscopic decompression for the subacromial impingement syndrome. 2. There were 31 males and 14 females and the mean age was 40 years for men and 46years for women. 3. The follow up duration was from 3 years 9 months to 1 year (average 2 years 1month). 4. Among 47 cases, 19 cases were found to have no cuff tear (stageII) 13 cases partial thickness cuff tear (stage IIIa) 10 cases complete tear on cuff less than 3 cm long (stage IIIb) and 5 cases complete tear on cuff more than 3 em in length (stage IIIc). 5. The arthroscopic subacromial decompression and rotator cuff debridement was a good treatment method in stage II and stage IIIa and stage IIIb. in the case of stage IIIc rotator cuff tear, it was useful for pain relief and improvement of shoulder function.

• 한국의류산업학회지
• /
• 제18권2호
• /
• pp.194-206
• /
• 2016

This study analyzed jackets by Alexander McQueen that have always pleased customers with traditional tailoring via every season's collection. This study categorized and then analyzed jackets by components such as silhouette, jacket length, collar, lapel, sleeve, shoulder line, and closure methods. To achieve the research goal, the study referred to photographs of 501 jackets introduced in signature brand collections by Alexander McQueen between 1996 and 2010. The analysis results on McQueen's jackets with the general components of the clothes indicated that the frequency of traditional tailoring components (such as lapels, tight sleeves, natural shoulder lines, and a button closing method) was higher than the frequency of designs of dramatic, deconstructive patterns examined by previously-conducted research. This shows that Alexander McQueen was cognizant to the responsibilities as a tailor and the basics of tailoring when developing jacket designs. This study also confirmed how McQueen enjoyed adding exaggerated jacket design components by making various use of details that emphasize drastic shapes like the hourglass silhouette, wing collar (that covers the shoulders), peaked lapel collar, kimono sleeve, bell sleeve, crescent shoulder, and pagoda shoulder.

• 한국의류학회지
• /
• 제33권8호
• /
• pp.1190-1202
• /
• 2009

A 3D body scan measurement (SM) is used as an alternative to physical measurements (PM) as the information for designing industrial products. This study compared the mean difference (MD) between SM and PM by gender and analyzed the causes of the difference. The data used in this study were the scan measurements and physical measurements of adults aged twenty to seventy years old of the fifth Size Korea survey. The results of this study are as follows: 1. The comparison of MD between men and women for all subjects: The measurement of the significant differences between men and women were height, neck base girth, chest girth, under-bust girth, waist girth, armscye girth, back length, and foot length. The causes of difference are the difference of body shape. 2. The comparison of MD between men and women by BMI groups: Many measurements had significant differences between men and women at normal weight and overweight but underweight. Some measurements had significant differences only at a specific BMI group because the body shape difference between men and women is revealed clearly in the group. The comparison of MD between men and women by age groups: The measurements that show significant difference at more than four age groups were neck girth, chest girth, under-bust girth, waist girth, armscye girth, and foot length. The height and abdomen girth had a significant difference in the age range of 20's and 30's. There were measurements that increase MD with an increase in age; under-bust girth and lateral shoulder length for women and lateral shoulder length for men. This comparison of MD between men and women provide the correct guidelines for the use of SM.

• 한국의류학회지
• /
• 제32권9호
• /
• pp.1397-1406
• /
• 2008

This research was to develop Taekwondo trunk protector(Hogu) and head protector's sizing systems corresponding the regulations by World Taekwondo Association. These sizing systems were established using 2003-2004 Size Korea anthropometric data. The result can be summarized as follows: According to the analysis of correlation, most measurements had high relationship with weight for Hogu and head girth for head protector. Six sizes(47, 54, 59, 64, 70, 76) for Hogu and 4 sizes(52, 54, 56, 60) for head protector were suggested in this study. Hogu sizes indicate body weights and head protector sizes express head girth measurements. By the comparison between current Hogu sizes and new sizes, the smaller sizes of new Hogu were bigger than current sizes in bust girth, back fastening length, shoulder length. On the other hand, the bigger sizes of new Hogu were larger than current sizes in bust girth, back fastening length, shoulder length. In addition, new Hogu's lengths were shorter than current Hogu in all sizes. The lengths of Neck to collar bone in new Hogu sizes were longer than current Hogu. In case of the head protector, there were no measurements besides outer circumference of helmet in recognized specifications of WTF. Therefore some referable measurements such as head girth, head length, bitragion arc, sagital arc were suggested in new size specification. When helmet sizes were suggested, the thickness of the NBR foam also were considered.

• Journal of Acupuncture Research
• /
• 제27권4호
• /
• pp.67-84
• /
• 2010

Objectives : To review RCTs on acupuncture treatment for shoulder pain in order to establish a standard acupuncture treatment model in treating shoulder pain. Methods : RCT articles on traditional acupuncture treatment for shoulder pain were searched through online database. Quality of studies were assessed using the FEAS and the modified Jadad score. Results : Eighteen trials of acupuncture for shoulder pain were analyzed. Based on the results of these reviews the following factors might contribute to optimal results from acupuncture treatment. 1) Usage of LI, SI, TE meridians, usage of $LI_{15}$, $TE_{14}$, $GB_{21}$, $LI_{11}$, $LI_4$, $SI_{14}$, $LI_{14}$, $TE_{15}$ acupuncture points. 2) More than four acupuncture points should be used. 3) More than 15 minutes of needle retention time. 4) Needle length-40mm and diameter-0.30mm. 5) More than 9 times treatment 6) More than 5 weeks treatment duration. Conclusions : There was no relation between quality of article and effectiveness of acupuncture. To improve the remedial value, it is necessary to mention De-qi, stimulation of acupuncture and correct variation in diagnosis with the above-mentioned. It is better that clinical trials of acupuncture treatment is designed that type of RCT and double blind. Also when it is set that sham nonpenetrating acupuncture, no treatment group as a control group, and participants don't distinguish wheather acupuncture treatment or not, it will be more meaningful.

• Clinics in Shoulder and Elbow
• /
• 제18권3호
• /
• pp.144-151
• /
• 2015

Background: The consensus is that a bony Bankart lesion shorter than 25% of the length of glenoid does not affect the clinical result; hence, such lesions were often neglected. However, small bony Bankart lesions are associated with various types of capsulolabral lesions. Methods: A total of 82 patients who had undergone arthroscopic capsulolabral lesion repair surgery for anterior shoulder dislocation were reviewed. The prevalence rates of early and late type of capsulolabral lesions were compared between a group of patients with and a group without small bony Bankart lesions. In addition, the types of accompanying capsulolabral lesion were analyzed according to the type of bony Bankart lesion. Finally, the clinical outcomes were evaluated (active range of motion, American Shoulder and Elbow Surgeons score and Rowe's score). Results: Among the 13 patients who had small bony Bankart lesions, the prevalence rate of early and late type of capsulolabral lesions was 38.5% and 61.5%, respectively. Among the 69 patients without bony Bankart lesion, the prevalence rates of early and late type of capsulolabral lesions were 74% and 26%, respectively. Significantly worse clinical outcome was observed for the group of patients with both small bony Bankart lesions and late type of capsulolabral lesion. Conclusions: More severe type of small bony Bankart lesion appears to be associated with late type of capsulolabral lesion. The significantly worse clinical outcome for patients with both small bony Bankart lesion and late type of capsulolabral lesion indicates that small bony Bankart lesions cannot always be neglected.

• Clinics in Shoulder and Elbow
• /
• 제27권1호
• /
• pp.88-107
• /
• 2024

The aim of this systematic review was to collect evidence on the following 10 technical aspects of glenoid baseplate fixation in reverse total shoulder arthroplasty (rTSA): screw insertion angles; screw orientation; screw quantity; screw length; screw type; baseplate tilt; baseplate position; baseplate version and rotation; baseplate design; and anatomical safe zones. Five literature libraries were searched for eligible clinical, cadaver, biomechanical, virtual planning, and finite element analysis studies. Studies including patients >16 years old in which at least one of the ten abovementioned technical aspects was assessed were suitable for analysis. We excluded studies of patients with: glenoid bone loss; bony increased offset-reversed shoulder arthroplasty; rTSA with bone grafts; and augmented baseplates. Quality assessment was performed for each included study. Sixty-two studies were included, of which 41 were experimental studies (13 cadaver, 10 virtual planning, 11 biomechanical, and 7 finite element studies) and 21 were clinical studies (12 retrospective cohorts and 9 case-control studies). Overall, the quality of included studies was moderate or high. The majority of studies agreed upon the use of a divergent screw fixation pattern, fixation with four screws (to reduce micromotions), and inferior positioning in neutral or anteversion. A general consensus was not reached on the other technical aspects. Most surgical aspects of baseplate fixation can be decided without affecting fixation strength. There is not a single strategy that provides the best outcome. Therefore, guidelines should cover multiple surgical options that can achieve adequate baseplate fixation.