• Journal of the Korea Society for Simulation
• /
• v.27 no.3
• /
• pp.117-129
• /
• 2018

In this paper we will discuss two different layout concepts which can be applied to rail-vehicle assembly factory. The existing system is based on the traditional flow line, and the suggested system is based on the fixed position layout. The main factors which affect on the system performances are the variation of process time, shortage rate of part and the shortage period. Simulation experiments indicate that the fixed position layout is better with respect to the throughput, mean flow time per vehicle and the mean flow time per fleet. Furthermore, the fixed position layout is more robust than the flow line because performance measures are insensitive to the variations of factors.

• Health Policy and Management
• /
• v.34 no.2
• /
• pp.120-128
• /
• 2024

From February to now 2024, there continues to be controversy over the expansion of admission number to medical school. Some of the controversy arises from a mix of present and future time points. In the present time point, the controversy over whether physicians are some shortages or not has various aspects. Some aspects are presented as evidence of the physician shortage and others as non-shortage. Also, the presenting evidence of shortage is being disputed, and so is the evidence of the contrary. This controversy over whether there is a shortage or not in the present time point makes it difficult to reach a consensus. In 10 years, the shortage of doctors will increase due to the rapid increase in the elderly population, so the admission number of medical schools will need to be increased. However, the increase must be such that there is minimal deterioration in the quality of medical education. More admission numbers should be allocated to medical schools with a high quality of medical education. This study suggests that large-scale medical schools increase the admission number by 20%-30%, and small-scale medical schools increase the admission number by 40%-50%, if so, the total increasing number is 760 to 1,066. If the 2,000-person increase is enforced, the quality of medical education must be carefully evaluated and the results should be reflected in adjusting the admission number of medical schools. In 20 years later, the admission number of medical schools will have to be reduced. This is because the physician supply is changing to a linear function and the physician demand (medical care demand) is changing to a quadratic function. Even if the current number is maintained, there will be an excess of doctors from 2048, so the medical school admission number must be reduced and its size will be reduced to about 2,000, a 30% reduction from the current number. Because the same reduction rate for all medical schools will result in many small-scale medical schools, the M&A (mergers and acquisitions) strategy should be considered with 40 medical schools and 12 Korean medical schools. In Korea, the main contributor to estimating physician demand is the change in population structure. Due to the rapid decrease in the total fertility rate, future population projections are uncertain. The recent rapid increase in healthcare utilization should be reexamined in the forecasting of physician demand. Since the various factors that affect the estimate of doctor supply and demand are unclear, the estimate of physician supply and demand must be continuously conducted every five years, and the Health Care Workforce Committee must be established and operated. The effects of increasing the admission number of medical schools should be evaluated and adjusted annually.

• Journal of Nutrition and Health
• /
• v.31 no.8
• /
• pp.1338-1346
• /
• 1998

North Korea has been experiencing a serious food shortage. However, the extent and magnitude of malnutrition and health problems are virturally unknown because a nationwide food and nutritional survey has never been conducted. To get a better udnerstanding of the situation., an exhaustive literature search on the health and nutritiona conditions of North Koreans was performed. We also obtained anthropometric data on 274 North Korean Defectors who are recently resettlers in the South. Some(137) measurements were taken at the time of entry to the South, and the remaining data was from the health and nutrition mail survey conducted by us on North Korean refugeee re-settlers. Health and inutritional status of North Koreans was found to be less than desirable as shown in high infant mortality rates, high mortality and morbidity rates of malnutriton-related infectious deseases, and smaller body sizes. Striking differences were noted in all of the above health and nutrition indicators between north and South Koreans. Considering the fact that North and South Koreans are homogeneous in their genetic back-ground, ours study results clearly demonstrate that the health and nutrition of North Koreas has deteriorated with the dhronic food shortage, which might have sorsened with a recent food crissi. The smaller and thinner adult stature proevailing in North Korea could play a significant negative role in the country's economy, since lower lean body mass has been associated with reduced work productivity that could hinder economic growth and development.

• Journal of Korean Society of Water and Wastewater
• /
• v.27 no.6
• /
• pp.679-687
• /
• 2013

Although stable and safe drinking water supply to the customers is a basic function of multi-regional water supply systems in Korea, most systems have their vulnerabilities in emergency time due to the branch-type. Application of connections from the other water supply system can provide a solutions for these tentative problems. This paper describes reduction planning of water supply accidents that can minimize a service interruption to customers in multi-regional water supply system by connecting pipe lines between local water supply systems in Mokpo city areas. The result of this study shows that Juam dam multi-regional water supply systems can cover all of the water shortage in southern parts of Jeonnam multi-regional water supply systems by transmitting water through connected pipes between local networks. This can be effective to supply water interactively in various contingencies, when a pipe line accident occurs in southern area of Jeonnam multi-regional water supply systems. On the contrary, southern area of Jeonnam multi-regional water supply systems can cover 99.5 %($62,500m^3/day$) of the water shortage of Juam dam multi-regional water supply systems when service interruptions caused by various pipe accidents occur in the system.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.21 no.6
• /
• pp.946-953
• /
• 2012

When water shortage has been getting worse recently, toilet water-saving is one of the most effective way to solve the water shortage. Therefore, in this study, toilet flushing performance was investigated with VOF(Volume Of Fluid) model to obtain the basic design data for the development of high-efficiency toilets. The result showed that the shorter trapway, the longer the flushing duration time. However, the shorter trapway is found to have disadvantage in exhausting dirt due to relatively weak siphon and higher curvature. Since the remaining water in a trapway appears to help siphon, it is also an important factor in developing high-efficiency toilets. Although higher water level in the water tank shows better performance in flushing, lower water level is preferred to save water. Too low water level may cause dirt to clog the trapway due to relatively weak siphon.

• Journal of Construction Engineering and Project Management
• /
• v.6 no.1
• /
• pp.11-19
• /
• 2016

Most of the Indian contractors are not well equipped to handle the growing demand of infrastructure development; hence construction projects frequently run in to time and cost overruns, disputes and quality issues. This study aims to improve the construction industry in India by implementing lean principles to eliminate non-value adding activities (wastes). The purpose of this study is to 1) identify the wastes and their sources affecting the construction process, and 2) to identify problems and document lessons by applying a Last Planner System (LPS) to a sample project. First, the researchers identified that Delays, Rework, and Interruptions were the most critical wastes affecting the construction process and Poor management control, Poor Planning and Shortage of Resources were the major sources of the above mentioned wastes. Second, the researchers report the Percent of Planned Complete (PPC) analysis results and experienced problems after implementation of LPS at the sample project. It was observed that much more improvement could have been achieved if there was consensus between the owners and the contractor on the implementation of the LPS in its entirety. Some of the problems experienced in the implementation of the LPS like lack of scheduling, resource and material shortage were found to be similar to those in developed countries.

• Proceedings of the KIEE Conference
• /
• 2003.07d
• /
• pp.2143-2145
• /
• 2003

In the linear system identification using the discrete time constant coefficients, there is a subspace method based on 4SID recently much suggested instead of the parametric method like as the maximum likelihood method. The subspace method is not related with the impulse response and difference equation in its input-output equation, but with the system matrix of the direct state space model from the input-output data. The subspace method is a very useful tool to adopt in the multivariable system identification, but it has a shortage unable to adopt in the closed-loop system identification. In this paper, we are suggested the methods to get rid of the shortage of the subspace method in the closed-loop system identification. The subspace method is used in the estimate of the output prediction values from the estimating of the state space vector. And we have compared the results with the outputs of the recursive least square method in the numerical simulation.

• Electronics and Telecommunications Trends
• /
• v.37 no.5
• /
• pp.33-43
• /
• 2022

We evaluated the problems of the current disaster psychological recovery support system of the Ministry of Interior and Safety for periodic infectious disease disasters, including COVID-19 (coronavirus disease 2019). The current disaster psychological recovery support systems are challenging to preemptively respond to infectious disease disasters over a wide range and for a long period. These result from the workforce shortage according to the face-to-face consultation method and the limited real-time application of consultation contents. Additionally, due to the workforce shortage, it is difficult to track those who have experienced disasters in the long term. Furthermore, most disaster psychology evaluation tools are for adults, and there are few evaluation tools for children and adolescents. This paper presents an advanced disaster psychological recovery support platform technology that can actively assist people in psychological recovery from disasters while mitigating these issues.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2012.11a
• /
• pp.171-172
• /
• 2012

In this study the continuous rectangular spiral hoop is used for saving cost and time, solving manpower shortage, and the quality of structures. Generally the use of continuous spiral reinforcement in reinforced concrete elements improve the strength and the ductility of the concrete. Savings in cost and time is demonstrated with the continuous rectangular spiral hoop through the mock up test of beam and column elements. In case of a 4m column element the time of rebar work decreases up to 40% compared with traditional hoop, and in case of a 8m beam the time also decreases 40%. This study present the construction method and details.

• IE interfaces
• /
• v.7 no.2
• /
• pp.121-132
• /
• 1994

Despite extensive research on various factors affecting the effectiveness of decision support systems (DSS), considerable ambiguity still exists regarding the role and influence of the experience on the given task and the decision support system. Although researchers have advocated DSS effectiveness as a multi-dimensional construct, specific results regarding the effect of the familiarity in the task and the DSS on the problem-solving time is still lacking. The study reported here attempts to find the effect of the peculiarity of the problem-solving process on the problem-solving time. The results of the study highlight that the expertise in both the task and the DSS have made the shortage of the problem-solving time. However, more research about the generalized performance measure on the DSS is required.