• 한국건설관리학회논문집
• /
• 제6권2호
• /
• pp.92-101
• /
• 2005

초고층 건축물은 층수의 증가에 비해서 공기의 증가가 작기 때문에 공기초과가 발생하기 쉽다. 최근 초고층 프로젝트의 증가에 따라 공정계획의 중요성이 증대되고 있으며 공정관리를 개선하기 위해서 공정계획 소프트웨어의 도입과 교육이 활발히 이루어지고 있다. 하지만 공정계획의 많은 부분은 아직도 계획자의 경험에 크게 의존하고 있다. 따라서 새로운 자재, 장비 및 공법이 도입되는 초고층 프로젝트는 공정 계획자의 경험이 부족할 경우, 경험 미숙으로 인한 공기초과가 발생하기 쉽다. 공정 계획자의 경험 미숙으로 인한 공정계획의 편차를 줄이기 위한 방안으로 본 연구에서는 전문가의 경험적 지식을 초고층 공정계획 작성에 활용하는 방안을 제안하였다. 사례연구에서는 초고층 골조공종을 대상으로 하여 본 연구에서 제안한 초고층 공정계획 지원시스템의 지식획득과 지식활용방안을 고찰하였다. 본 연구에서 제안한 지식획득과 지식활용을 토대로 초고층 공정계획 지원시스템을 구축하여 활용한다면 초고층 공정계획의 정확성을 높일 수 있으며 공기초과를 예방할 수 있을 것이다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 정기총회 및 추계학술대회 논문집
• /
• pp.1851-1855
• /
• 2011

휠-레일 접촉해석의 정밀도는 휠과 레일의 접촉 위치 분석 방법 및 접촉력 계산 방법에 따라 결정된다. 휠과 레일의 형상을 2차원 곡선접촉으로 가정하여 휠-레일 접촉 위치를 찾는 방법은 계산시간이 짧은 장점이 있지만 3차원 곡면으로 가정한 경우에 비해 근사화된 해를 가지는 단점이 있다. 본 연구에서는 2차원 곡선접촉 해석에 기인한 방법과 3차원 곡면으로 가정한 방법에 대한 휠셋의 동특성 해석 결과을 비교하고자 한다. 곡선 주행시 휠셋 중심에 대해 요 각도 및 횡변위 등의 해석결과를 비교하고자 한다.

• 대한임베디드공학회논문지
• /
• 제8권2호
• /
• pp.69-78
• /
• 2013

As vehicles become more intelligent for safety and convenience of drivers, in-vehicle networking systems such as controller are network (CAN) have been widely used due to increasing number of electronic control unit (ECU). Recently, FlexRay was developed to replace CAN protocol in chassis networking systems, to remedy the shortage of transmission capacity and unsatisfactory real-time transmission delay of conventional CAN. However, it is difficult for vehicle network designers to calculate platform configuration registers (PCR) and determine a base cycle or slot length of FlexRay. To assist vehicle network designers for designing FlexRay cluster, this paper presents automatic field bus exchange format (FIBEX) generation algorithm from CANdb information, which is de-facto standard database format for CAN. To design this program, structures of FIBEX, CANdb and relationship among PCR variables are analyzed.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2013년도 추계학술대회 논문집
• /
• pp.239-240
• /
• 2013

The increased demand for conventional energy sources, and international oil price rises are driving societies toward research and development of renewable energy. A large number of their installations and penetrations will bring an instability distribution power system. Also, load concentration problem at specific time can cause the shortage of power reserve margin. To deal with these problems, the development of energy storage systems (ESS) is required. This paper proposes the 1MW grid-connected ESS with Li-ion battery and power conditioning system (PCS). The performances of the 1MW grid-connected ESS are evaluated and verified with the PSCAD/EMTDC based simulation test.

• 한국멀티미디어학회논문지
• /
• 제23권8호
• /
• pp.1059-1065
• /
• 2020

In hospitals, nurses are subjectively determining the urine status to check the kidneys and circulatory system of patients whose statuses are related to patients with kidney disease, critically ill patients, and nursing homes before and after surgery. To improve this problem, this paper proposes a urine spectrum analysis system which clusters urine test results based on a hybrid machine learning model consists of unsupervised learning and supervised learning. The proposed system clusters the spectral data using unsupervised learning in the first part, and classifies them using supervised learning in the second part. The results of the proposed urine spectrum analysis system using a mixed model are evaluated with the results of pure supervised learning. This paper is expected to provide better services than existing medical services to patients by solving the shortage of nurses, shortening of examination time, and subjective evaluation in hospitals.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집C
• /
• pp.482-484
• /
• 2001

In orthopedics, hip arthroplasty is the operation that replaces damaged hip joint to artificial joint. In hip arthroplasty, quite better result can be achieved if robot is applied to machine cavity in bone, especially when cementless stem is used. So several kinds of robots were introduced for hip arthroplasty, but they used MRI, CT Scan, vision analysis and real time tracking of bone position for registration of robot. To overcome shortage of conventional robot surgery, gauge based registration method was proposed and small robot was designed. In this method, small robot is mounted on femur, and its position is determined by gauge registration method. Operation procedure was performed on model femur and result was analyzed. This robotic hip surgery system is expected to more adaptable in operation room.

• 품질경영학회지
• /
• 제28권1호
• /
• pp.210-219
• /
• 2000

When an electronic control system has been used for long time, the electronic control system becomes obsolete and no longer In production. In this case, the existing control system should replace by new system due to shortage of spare modules. However, if the proper number of spare modules are stocked, it may be possible and more economical than to replace by new system to extend the usage period of the existing control system. In this case, it is an important problem to determine the proper number of spare modules. In this paper, a method to determine the proper number of spare modules is presented with an application example.

• 기술혁신학회지
• /
• 제1권2호
• /
• pp.245-261
• /
• 1998

This study aims to describe the overall aspects of future technologies in Korea based on the new taxonomy of technology foresight ; Theme, Area and Paradigm. This taxonomy is designed to overcome and supplement several studies on technology foresights which are judged not to capture the whole aspects of future technologies. Future technologies in Korea will be influenced by the Information and Communication Technology Paradigm over 20-30 years, and by the Biotechnology Paradigm after that period. Expansion of researches in electronics, information and communication is noticeable features in engineering. The application of biotechnology technique and health/environment technologies are emerging in bioscience area. Also there appear new areas related to the trends of engineering and bioscience in natural science. Current research patterns focusing physics, chemistry and engineering in Korea should be changed to those of the advanced countries which emphasize bioscience. Time lag to the world frontier is over 5-6 years, but the lag is expected to be reduced. The shortage of manpower and research funds are pointed as the biggest barrier for the realization of future technologies.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1994년도 가을 학술발표회 논문집
• /
• pp.447-450
• /
• 1994

The chemical method and mortar-bar method for identification of the susceptibility to Alkali-Aggregate Reaction (AAR) was established as KS method by referencing the ASTM methods. However, the chemical method requires skilled chemical engineers and aggregates are tested in very severe condition, and on the other hand, the mortar-bar method needs a long time of 3 or 6 months. Judging from this circumstance that the use of crushed stones are increased due to the shortage of natural aggregates, the development and standardization of a new rapid test method is considered essential. The purpose of this paper is to research for the possibility to apply the rapid method, instead of the chemical method and the mortar-bar method with using the several domestic crushed stones.

• 한국경영과학회지
• /
• 제8권2호
• /
• pp.57-65
• /
• 1983

Despite the recent phenomenal growth in computer installations in business and increasing interests in Management Information Systems in Korea, there are basic questions remained: how are the computers utilized, what is the current state of MIS, and what are the strategies which will enhance the current state of MIS in Korea？ The purpose of this paper is to answer these questions. To begin, the current state of MIS is investigated from the aspects of MIS budget, manpower, hardware, and various softwares based on the survey of 30 major industries. The results show that the overall MIS in Korea is still remained in the primitive stage despite its ultra modern computer hardwares. The obstacles that hinders the MIS evolution in Korea seems intractable for quite a long period of time. Some strategies are suggested which can partially remove two big obstacles-shortage in qualified manpower and lack of softwares that fit Korean industries.