• 한국군사과학기술학회지
• /
• 제18권3호
• /
• pp.260-266
• /
• 2015

The warship is run based on the combat system which shares tactical information collected by target detection systems and navigation devices across a network, and conducts the command and control of weapons from target detection to kill assessment. The short-range air defense missile system defends a warship from anti-ship missiles, aircraft, helicopter and other threats in order to contribute to the survival of a warship and the success of missions. The short-range air defense missile system is applied to a various combat systems. In this paper, we have proposed the interface design between the short-range air defense missile and dissimilar combat systems. To employ the short-range air defense missile at dissimilar combat systems, each system is driven by independent processor, and the tasks which are performed by each system are assigned. The information created by them is exchanged through the interface, and the flow of messages is designed.

• 한국정보통신설비학회:학술대회논문집
• /
• 한국정보통신설비학회 2009년도 정보통신설비 학술대회
• /
• pp.242-247
• /
• 2009

In this paper, we investigate interference between short-range radiocommunication devices (SRDs) with frequency hopping spread spectrum (FHSS) and direct sequence spread spectrum (DSSS) methods when they are in the same frequency bands. In order to analyze interference from unwanted emission of SRD with DSSS to that of FHSS, Monte-Carlo (MC) simulation method is employed and interference probabilities are calculated. We simulate interference scenarios in accordance with several duty cycles and bandwidths. It is also assumed that the propagation model is free space The effect of distance between interfering transmitter and victim receiver is analyzed and bit error rate (BER) is simulated. From the interference analysis results, it is shown that duty cycle affects compatibility more than bandwidth does. Also, we can make sure of the separation distance which satisfies BER criterion when there are only one interfering transmitter and multiple interfering transmitters.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 추계학술대회 논문집
• /
• pp.63-64
• /
• 2007

Polystyrene-block-polymethyl methacrylate (PS-b-PMMA) can pattern nanoscale structures over large areas. However these patterns have a short-range order. These short-range order limits their utility in some applications. Consequently, we have to overcome this limitation of block-copolymer. In this study we added a electrical field to the standard block-copolymer patterning method for long-range ordered arrays of nanostructures. This method is conformed by annealing a block copolymer with applied voltages. It is very simple method that do not have any additional hour. In this reason it can be applied easily for other nanostructure fabrications. This method opens up a new route to the controlled phase separation of block copolymers with precise place of the nanostructures.

• Current Applied Physics
• /
• 제18권11호
• /
• pp.1248-1254
• /
• 2018

Magnetization versus temperature and magnetic-field measurements, M(T, $H_a$), have been carried out to study the magnetic and critical properties of polycrystalline $La_{1-x}Ba_xCoO_3$ (x = 0.3 and 0.5) cobaltites. These compounds with the density of ${\sim}6.2g/cm^3$ crystallized in the $R{\bar{3}}c$ rhombohedral and $Pm{\bar{3}}m$ cubic structures, respectively. With an applied field $H_a=200Oe$, M(T) data have revealed that the samples with x = 0.3 and 0.5 exhibit the ferromagnetic-paramagnetic (FM-PM) phase transition at the Curie temperature points $T_C=202$ and 157 K, respectively. At 4.2 K, the saturation magnetization ($M_{sat}$) decreases from 35.9 emu/g for x = 0.3-26.1 emu/g for x = 0.5. Particularly, the critical-behavior analyses in the vicinity of $T_C$ reveal all samples undergoing a second-order phase transition, with critical exponent values (${\beta}=0.328$ and ${\gamma}=1.251$ for x = 0.3, and ${\beta}=0.331$ and ${\gamma}=1.246$ for x = 0.5) close to those expected for the 3D Ising model. This proves short-range magnetic order existing in $La_{1-x}Ba_xCoO_3$. We believe that magnetic inhomogeneities due to the mixture of hole-rich FM regions (confined in the trivalent-cobalt hole-poor anti-FM matrix) and uniaxial anisotropy prevent long-range order in $La_{1-x}Ba_xCoO_3$.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2009년도 추계학술대회 논문집
• /
• pp.453-453
• /
• 2009

• International Journal of Precision Engineering and Manufacturing
• /
• 제2권3호
• /
• pp.19-26
• /
• 2001

In order to investigate the effect of single tensile overload on the short crack growth behavior under the out-of-plane cyclic bending moment, crack opening stresses were continuously measured by an elastic compliance method using strain gages. The characteristics of short crack growth after the single tensile overload are analyzed by the effective stress range ratio. Futhermore, the investigation was carried out with respect to various fatigue crack growth behaviors such as the plastic zone size effect on crack retardation, the retarded crack length and the number of cycles.

• Journal of Welding and Joining
• /
• 제21권1호
• /
• pp.48-53
• /
• 2003

The object of this study is to examine the effect of short circuit time ratio (SCTR) and current rise delay time (Td) on the spatter generation at low and medium current range in $CO_2$ welding. The spatter was evaluated by the weight generated in the welding of bead-on-plate for 30 seconds (3 times). Td was varied by order of 0, 0.4, 0.8 and 1.2 msec. At each Td, the short circuit time ratio was varied by the output voltage of the welding power source. In the low current range, it was found that the optimum SCTR was 20~25%, and the minimum spatter generation weight was obtained in the case of Td=0.4msec and SCTR=22% even though the remarkable difference was not showed by the application of Td. In the medium current range, it was confirmed that the arc was stable though the SCTR was increased from 20% to 40% by the control of current wave. Spatter generation weight depended on the variation of Td, and the lowest value of spatter generation weight occurred at Td=0.8~1.2msec.

• 한국생물정보학회:학술대회논문집
• /
• 한국생물정보시스템생물학회 2005년도 BIOINFO 2005
• /
• pp.287-293
• /
• 2005

Predicting RNA secondary structure as accurately as possible is very important in functional analysis of RNA molecules. However, different prediction methods and related parameters including terminal GU pair of helices, minimum length of helices, and free energy systems often give different prediction results for the same RNA sequence. Then, which structure is more important than the others? i.e. which combinations of the methods and related parameters are the optimal? In order to investigate above problems, first, three prediction methods, namely, random stacking of helical regions (RS), helical regions distribution (HD), and Zuker's minimum free energy algorithm (ZMFE) were compared by taking 1139 tRNA sequences from Rfam database as the samples with different combinations of parameters. The optimal parameters are derived. Second, Zuker's dynamic programming method for prediction of RNA secondary structure was revised using the above optimal parameters and related software BJRNAFold was developed. Third, the effects of short-range interaction were studied. The results indicated that the prediction accuracy would be improved much if proper short-range factor were introduced. But the optimal short-range factor was difficult to determine. A user-adjustable parameter for short-range factor was introduced in BJRNAFold software.

• 한국위성정보통신학회논문지
• /
• 제11권1호
• /
• pp.12-15
• /
• 2016

최근 핀테크 열풍과 더불어 모바일 결제 시장에서 글로벌 IT 기업들의 경쟁이 치열해지고 있다. 본 논문에서는 모바일 결제 기술을 소개하고 그 특징 및 동향을 분석한다. 근거리 통신을 사용한 오프라인 기반의 모바일 결제 기술의 방식 별 특징 및 장단점 등을 서술하고, 이 분야의 글로벌 선두 기업인 애플, 삼성, 구글이 출시한 모바일 결제 서비스 사례를 통하여 그 특징들을 비교 분석한다. 급속한 성장이 예상되는 모바일 결제 시장에서 더욱 안정된 서비스를 제공을 위해서는 다양한 근거리 통신 및 보안기술에 대한 연구가 필요하다.

• 한국응용과학기술학회지
• /
• 제25권2호
• /
• pp.144-150
• /
• 2008

The polyamide-amide-imide (PAAI) was synthesized by reacting 4,4'-diaminobenzanilide (DBA) with trimellitic anhydride chloride using a two-stage heating. The precursor of polyamide-acids was formed at first stage and followed by the formation of imide of PAAI. Two polyamide-imides (PAIs) were prepared from benzidine (BZ) or 4,4'-diaminodiphenylether (DPE) with trimellitic anhydride chloride. These three polymers had glass transition temperature in the temperature range of $240-250^{\circ}C$. X-ray data were obtained on thin film specimens cured at $250^{\circ}C$. There was a minimal kind of short-range order consisting of the most probable distances between neighboring chains. The average segmental spacing of short-range order decreased in the order of polymers obtained from 4,4'-diaminobenzanilide (DBA), polyamide-imide, and 4,4'-diaminodiphenylether (DPE). The imidization of three polyamide-imides was confirmed by $^{15}N$ MAS NMR and FT-IR spectroscopy. $^{15}N$ NMR spectrum of cured polyamide-imide showed imide $^{15}N$ peak, thereby providing an evidence for the imidization of three polyamide-imides.