• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2012.05a
• /
• pp.191-193
• /
• 2012

the existing developed route guidance services for the visually impaired aids for using RFID tags attached to the cane, the extent to which the cover blocks and RF communication was a simple walking guide service. It has a detection range of RFID readers in short, clear obstacles to location, size and shape can not be determined. And the risk of escape routes in case of questions or directions Measures are urgently needed. Today, due to the Smart Device Development convenience to users and offers many benefits. And the Android platform, Client and Server (PC) between the socket stream, using real-time video and voice information, location information by sending a dangerous situation for the visually impaired to take immediate action on the system and 1: N is to implement the service.

• International Journal of Highway Engineering
• /
• v.18 no.6
• /
• pp.69-76
• /
• 2016

OBJECTIVES : The objective of this study is to propose a capacity analysis methodology for riverside bike-exclusive roads. METHODS : Three steps were performed to develop a methodology to estimate bikeway capacity. First, we reviewed previous studies on the vehicle-road capacity analysis and proposed their applicability to bikeways. Second, two assumptions were made based on the traffic flow characteristics of bikeways: (1) the capacitated state in bikeways occur within a bicycle platoon, and (2) a bicycle platoon consists of more than three bicycles running in close proximity. In addition, it is assumed that the mean time headway of a bicycle platoon represents the characteristics of the platoon. The normality of the mean-time headway of a bicycle platoon calculated using the central limit theorem leads to the development of a method that estimates the riverside bikeway capacity using data collected from two different riverside bike-exclusive roads (Han-river and Anyangcheon). We used a location-fixed video camera to record videos of running bicycles and wrote a special-purpose software program to code the time-headway data from the videos. RESULTS : Time headways from 189 bicycle platoons were analyzed. The estimated mean-time headway of the capacitated bicycle flow is 1.01 s, from which the capacity of the bikeway is found to be 3578 vehicles/h. CONCLUSIONS : The proposed method that estimates bikeway capacity could be applicable to the analysis of short-range congested area rather than planning the number of lanes. In other words, it determines the sections that are temporarily highly congested and proposes appropriate strategies to mitigate the congestion.

• Fire Science and Engineering
• /
• v.31 no.1
• /
• pp.36-41
• /
• 2017

In this study, the experimental measurements from a one-way moving experiment showed that the average movement speed was 0.55 m/s with an average crowd density of $2.36P/m^2$ in a corridor. The cCalculation result of the correlations between the crowd density and movement speed from the SFPE Handbook showed an average of 0.53 m/s. The difference between the calculation and experiment was 0.02 m/s. A comparison of each data set showed that the maximum difference was 0.38 m/s. Some experimental results showed that the crowd density increased with increasing movement speed and the average data from the entire experiment time was used for the analysis. When the short time interval for frame by frame analysis for video files was conducted, the experimental data was expected to be more reliable.

• Korean Journal of Applied Biomechanics
• /
• v.17 no.2
• /
• pp.157-166
• /
• 2007

This study was to compare the major kinematic factors between the success and failure group on performing the back somersault motion in floor exercise. Three gymnasts(height : $167.3{\pm}2.88cm$, age : $22.0{\pm}1.0years$, body weight : $64.4{\pm}2.3kg$) were participated in this study. The kinematic data was recorded at 60Hz with four digital video camera. Two successful motions and failure motions for each subject were selected for three dimensional analysis. 1. Success Trail It was appear that success trail was larger than failure group in projection velocity, but success trail was smaller than failure trail in projection angle. Also it was appear that success trail was longer than failure group in the time required. Hand segment velocity and maximum velocity in success trail were larger than those in failure trail, and this result was increasing the projection velocity and finally increasing the vertical height of center of mass. At the take-off(event 2), flection amount of hip and knee joint angle was contributed to the optimal condition for the take-off and at the peak point, hip and knee joint angle was maximum flexed for reducing the moment of inertia. Also in this point, upper extremities of success trail extended more than those of failure trail. in this base, success trail in upward phase(p3) 2. Failure Trail It was appear that failure trail was smaller than success trail in projection velocity, but failure trail was larger than success trail in projection angle. Also it was appear that failure trail was more short than success trail in the time required. Hand segment velocity and maximum velocity in failure trail were smaller than those in success trail, and this result was reducing the projection velocity and finally reducing the vertical high of center of mass. At the take-off(event 2), flection amount of hip and knee joint angle wasn't contributed to the optimal condition for the take-off and at the peak point, hip and knee joint angle wasn't maximum flexed for reducing the moment of inertia. Also in this point, upper extremities of failure trail didn't extended more than those of success trail.

• Journal of Korea Game Society
• /
• v.6 no.2
• /
• pp.51-60
• /
• 2006

Smoothing is a transmission plan where variable rate video data is converted to a constant bit rate stream. Among them are CBA, MCBA, MVBA, PCRTT and others. But, in these algorithm, a transmission plan is made in according to stored frame sequence in these algorithms. In case that the number of bytes in frames in GOP differs greatly each other, this may cause unnecessary transmission rate changes and may require high transmission rates abruptly when frame's byte is large. In result, it is difficult to use efficient network resource. In this paper, we proposed a smoothing algorithm that find the optimal frame sequence in short time by using backtracking method and smoothing's structure for the proposed smoothing algorithm. This algorithm decides the sequence of frames which requires the lowest variance of frame's bytes in GOP and make a transmission plan. In order to show the performance, we compared with MVBA algorithm by various evaluation factors such as the number of rate changes, peak rate, rate variability.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.13 no.3
• /
• pp.497-502
• /
• 2018

An analog to digital converter(: ADC) has been designed to extract video signals of marine X-band radar and convert to digital signals in order to produce rainfall information. X-band weather radars are suitable for high temporal-spatial resolution observations of rainfall over local ranges but they are very expensive and require professional management. The marine radars with 10-2 cost facilitate data collection and management as well as economic benefits. To validate the usefulness of the developed ADC, comparative observations were made with weather radar for short term precipitation cases. The rainfall distribution of marine radar observations are consistent with that of weather radar within a radius of 15 km. This demonstrates the usability of marine radar for rainfall observations.

• Korean Journal of Applied Biomechanics
• /
• v.13 no.3
• /
• pp.47-65
• /
• 2003

The purpose of this study was to investigate the differences of the kinematical and the kinetical factors that calculated from preflight to postflight of salto forward straight 3/2 turn motion between skitters and less-skitters. four S-VHS video cameras operating at 60Hz were used to record the performances. five elite male gymnasts were participated in this study as subjects. three-dimensional coordinates of 20 body landmarks during each trial were collected using a Direct Linear Transformation method. The digitized body landmarks were smoothed using a Butterworth second order with low pass digital filter and a cutoff frequency of 10Hz. 1. A skitter, got a high score for performance, showed shorter time and faster horizontal velocity than a less-skitter at the board contact. also, a skitter extended quickly his knee and hip joint after contacting board for preflight phase. 2. A skitter revealed faster time and horizontal velocity the vault from taking off board than a less-skiller. A skitter took a long time and high distance to get the vertical peak compared with a less-skiller. 3. For the second phase, a skitter, who executes the most optimal motions among the subjects, displayed a long flight time, a high height, and a far flight distance as well as maintaining consistent horizontal speed even at the peak of post flight. On the other side, a less-scorer displayed a slow vertical velocity, distance and a short time at the point of take-off from vault as well as low height at the peak of post flight.

• Korean Journal of Applied Biomechanics
• /
• v.22 no.2
• /
• pp.159-171
• /
• 2012

The purpose of this study was to provide information about kinematic variables of the gliding and delivery motion of Hyung-Keun Lee, a high school shot putter who was ranked 1st at the 2011 National Sports Festivals. Three-Dimensional motion analysis using a system of 4 video cameras at a sampling frequency of 60 Hz was conducted during shot-putting events at the 2011 National Sports Festivals. During the gliding and delivery phase of the player the results showed following characteristics; 1) The gliding technique types of the player appeared to be the short-long technique as the gliding and stance length ratio were $42.3{\pm}3.87$ % and $57.7{\pm}3.87$ %, respectively. In addition, the trajectory of shots during the gliding and delivery phase showed different trajectory patterns with "S-shaped" type of elite players due to the deviation from a central axis of the APSS (athletic-plus shot system). 2) The horizontal velocity of COG made from gliding should maintain the velocity during transition and release phase, but the player showed a small momentum for a gradual decrease of velocity. 3) Therefore, the player requires to adjust an appropriate ratio between gliding and stance length with a strong muscle power at the trunk, throwing arm, and the lower extremity during gliding and delivery phase.

• Korean Journal of Applied Biomechanics
• /
• v.21 no.2
• /
• pp.161-171
• /
• 2011

The purpose of this study was to identify biomechanical characteristics of glide and delivery motion of In-Sung Hwang, player who is a member of the national team among the finalists in the men's shot put at the 2010 National Sports Festivals. Three-Dimensional motion analysis using a system of 3 video cameras at a sampling frequency of 60 Hz was performed for this study. During the glide and delivery phase the results showed following characteristics; 1) The glide type was suitable for the short-long technique, but the trajectory of shot at the glide and delivery phase showed a different trajectory pattern with "S-shaped" type of elite players due to many deviating from central axis of the APSS(athletic-plus shot system). 2) Left knee was more flexed during failed trials compared to successful trials but COG was higher. Therefore, the player showed less stability of COG as he may not get enough breaking force at the left foot. 3) Furthermore, it would be required to have strong muscle power at the trunk, throwing arm, and the lower extremity in order to achieve maintain a low projection angle of the release.

• Korean Journal of Health Education and Promotion
• /
• v.16 no.1
• /
• pp.137-148
• /
• 1999

The necessity of school health promoting projects is well known to many researchers, however, there is a lack of research on the development of strategies for school health programs and the evaluation of the effectiveness of the programs. The results of our previous study in 1996 identified poor eyesight as one of the several health problems among elementary school children in urban areas. The main objective of this study is to develop, implement, and evaluate vision care for elementary school children. The research method utilized a quasi experimental design using non-equivalent group, pre-post comparison. The sample consisted of all second grade children in two elementary schools in Kyung-giProvince. In order to prevent a contamination effect of the vision care program, one school was selected as a control and the other school was selected as a treatment group. The experimental school had 467 children and the control school had 402 children. The visual acuity of children in both group was measured and a survey questionnaire was sent out to parents on the knowledge, attitude, and behavior related to vision care before the program was implemented. The children of the experimental school received the following programs; separate education on proper nutrition and care of eyesight for children and parents, daily eye exercises using video tape, and an essay and poster contest on healthy eyesight. The eye exercise program lasted from March, 1997 to November, 1997. On November, 1997, visual acuity was measured again from children in both schools. The data was analyzed by using SAS statistical package. The results indicate that the children in the experimental group had significantly (p〈0.001) better eyesight than the children in the control group. Also, some of the behavior highly related to the poor eyesight are poor maternal eyesight and watching TV from a short distance. In conclusion, one of the significance of this project is that the vision care program was developed after the need assessment. It will be encouraged in the future that more school health program should be developed after a need assessment. Also, inclusion of family members was important in health promoting projects within a school setting since healthy behavior needs to be reinforced at horne as well as at school.