• 한국전산구조공학회논문집
• /
• 제17권3호
• /
• pp.225-239
• /
• 2004

이 논문에서는 철근콘크리트 골조 구조물의 시공 시 작용하는 사하중, 활하중, 시공하중 등의 하중에 대한 지지 및 안전한 시공을 위해 설치되는 지지시스템에 대하여 보다 체계적인 분석이 이루어졌다. 지지시스템의 종류, 비계의 강성과 간격 등의 변화에 따른 구조물의 거동특성을 비교, 분석하였고, 기존의 설계규준 및 해석방법과의 비교를 위해 크리프 등의 시간의존적 거동을 고려한 경우와 괴려하지 않은 경우에 대하여 해석이 수행되었으며, 나무 비계를 사용한 경우와 강재 비계를 사용한 경우에 대한 비교 검토가 이루어졌다. 또한, 대표적인 3-경간 구조물에 대한 해석을 수행하여 내측 기둥과 외측 기둥의 부등축소에 따른 영향을 반영한 검토가 이루어졌다. 나아가 다양한 설계인자의 변화에 따른 거동분석을 통해 2SlR 지지시스템이 가장 효율적임을 제시하였다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2021년도 가을 학술논문 발표대회
• /
• pp.25-26
• /
• 2021

System scaffolding and shoring are temporary structures in which vertical members, horizontal members, bracing members and trusses are assembled and installed. In order to ensure quality and safety, the quality test shall be carried out in accordance with the Guidelines for Quality Management of Construction Works (MOLIT Notice No. 2020-750). The quality test method (national standard) for Components for tied post system scaffolding and shoring is based on the Korean standards (KS F 8021) and the Safety certification standards (MOEL Notice No. 2021-22). However, the two standards differ in some aspects such as performance standards and etc, so cause confusion when applying them on-site. In addition, the standard for truss are applied only to trusses for shoring and cannot be applied to trusses for scaffolding. Therefore, this study aims to unify the two national standards and establish realistic standards.

• Structural Engineering and Mechanics
• /
• 제10권1호
• /
• pp.53-66
• /
• 2000

This paper proposes a simple numerical model for use in a finite analysis (FEA) of scaffold-shoring systems. The structural model consists of a single set of multiple-story scaffolds with constraints in the out-of-plane direction at every connection joint between stories. Although this model has only two dimensions (termed the 2-D model), it is derived from the analysis of a complete scaffold-shoring system and represents the structural behavior of a complete three-dimensional system. Experimental testing of scaffolds up to three stories in height conducted in the laboratory, along with an outdoor test of a five-story scaffold system, were used to validate the 2-D model. Both failure modes and critical loads were compared. In the comparison of failure modes, the computational results agree very well with the test results. However, in the comparison of critical loads, computational results were consistently somewhat greater than test results. The decreasing trends of critical loads with number of stories in both the test and simulation results were similar. After investigations to explain the differences between the computationally and experimentally determined critical loads, it was recommended that the 2-D model be used as the numerical model in subsequent analysis. In addition, the computational critical loads were calibrated and revised in accordance with the experimental critical loads, and the revised critical loads were then used as load-carrying capacities for scaffold-shoring systems for any number of stories. Finally, a simple procedure is suggested for determining load-carrying capacities of scaffold-shoring systems of heights other than those considered in this study.

• Structural Engineering and Mechanics
• /
• 제10권1호
• /
• pp.67-79
• /
• 2000

Critical loads and load-carrying capacities for steel scaffolds used as shoring systems were compared using computational and experimental methods in Part I of this paper. In that paper, a simple 2-D model was established for use in evaluating the structural behavior of scaffold-shoring systems. This 2-D model was derived using an incremental finite element analysis (FEA) of a typical complete scaffold-shoring system. Although the simplified model is only two-dimensional, it predicts the critical loads and failure modes of the complete system. The objective of this paper is to present a closed-form solution to the 2-D model. To simplify the analysis, a simpler model was first established to replace the 2-D model. Then, a closed-form solution for the critical loads and failure modes based on this simplified model were derived using a bifurcation (eigenvalue) approach to the elastic-buckling problem. In this closed-form equation, the critical loads are shown to be function of the number of stories, material properties, and section properties of the scaffolds. The critical loads and failure modes obtained from the analytical (closed-form) solution were compared with the results from the 2-D model. The comparisons show that the critical loads from the analytical solution (simplified model) closely match the results from the more complex model, and that the predicted failure modes are nearly identical.

• 한국공간구조학회논문집
• /
• 제18권1호
• /
• pp.85-92
• /
• 2018

Construction techniques and materials are developing and structures are designed to be irregular shaped, and therefore more detailed structural analysis is required. The purpose of this study is to analyze the cause of accidents related to falsework systems during construction and discuss prevention methods in order to prevent accidents relate to prefabricated shoring system during construction. In this paper structural analysis was conducted to study the influence of slab irregularity on system supports and analysis to investigate the participation of the bracing in the system support.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2008년도 추계 학술발표회 제20권2호
• /
• pp.41-44
• /
• 2008

PCT는 장경간 가시설 벽체를 지지하는 써포트 구조물을 프리캐스트 방식으로 공장에서 미리 제작하고, 콘크리트 소재로 구성하여 강성을 만족시킬 수 있도록 그 구조가 개선된 프리캐스트 가시설 구조체이다. 그것의 부재들은 공장에서 미리 정형화된 형태로 제작되고 가시설 벽체의 내측면에 고정수단을 매개로 근접되게 배치된다. PCT system은 내부에 콘크리트가 충진되는 세그먼트 부재들의 단부와 접촉되어 결합수단을 매개로 일체화되어 또한 다른 세그먼트 부재를 연결시키는 연결구로 이루어진 써포트 구조물로 구성된 것이다. 본 연구는 전체적인 길이가 긴 장경간 가시설 벽체에 대한 충분한 지지력을 얻을 수 있을 뿐만 아니라, 프리캐스트 방식으로 제작되어 콘크리트 양생에 소요되는 시간을 단축시킬 수 있으므로 시공기간이 단축되는 등의 유용한 효과를 갖는다.

• 한국안전학회지
• /
• 제34권3호
• /
• pp.36-41
• /
• 2019

As the prefabricated shoring system structure, which is a temporary structure, is often collapsed due to various reasons during concrete pouring, and directly affects not only the safety of the workers but also the quality of the final building, it is necessary to ensure the safety. It is considered that the pipe supports which are widely used as the prefabricated shoring materials in the construction site do not satisfy the performance criteria in many cases. Therefore, this study investigated the detailed conditions for satisfying the performance criteria and suggested the factors for improving the quality control level in order to prevent collapse accidents due to pipe supports reused at the construction site, As the results of test in order to understand the effect of the pipe supports (V2), which are being reused in the field, on the performance by factor, the performance was evaluated to be high in case of the small female screw clearance and the supporting pin with 12mm in diameter or larger.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2020년도 가을 학술논문 발표대회
• /
• pp.4-5
• /
• 2020

Pipe support is a representative structure that supports slab formwork, and it is a representative temporary equipment that has been systematically managed since the 1990s when the domestic temporary equipment performance test system was introduced. Nevertheless, it is also a reality that many of the products in circulation are used products that are reused and do not meet the performance of the initial manufacturing stage. However, if only new products are insisted, it could lead to delays in the process due to an increase in construction costs and difficulties in timely delivery. On the contrary, it is not acceptable for the safety of the construction site to use products of low quality without verification procedures or standards. Therefore, this study attempts to grasp the management system such as safety certification for temporary equipment and the actual condition of quality control to maintain performance, and propose improvement plans.

• 한국안전학회지
• /
• 제26권3호
• /
• pp.59-62
• /
• 2011

Among the accidents and failures that occur during concrete construction, many are formwork failures which usually happen when concrete is being placed. A system of formwork filled with wet concrete has its weight at the top and is not basically a stable structure. Slab formwork consists of sheathing, stringer, hanger and shore. There are several types of adjustable shores. In construction site, pipe supports are usually used as a shore of slab formwork. In this study, pipe support systems with/without horizontal connector were measured by buckling test. Buckling load of respective pipe support system was analyzed by structural analysis program(MIDAS). Buckling load of pipe support with/without horizontal connector was got by test and structural analysis. According to these results, we know that horizontal connector made pipe support system very safe. Buckling load of pipe support with horizontal connector is 56% higher than that without horizontal connector. So horizontal connector is important in slab formwork systems. Finally, the present study results will be used to design slab formwork system safely in the construction sites.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2012년도 춘계학술대회
• /
• pp.80-81
• /
• 2012

우리 사회는 전력의 생산 및 배전 시스템, 통신기술, 텔레커뮤니케이션, 금융시스템, 수송시스템 등의 효율적이고 정상적으로 운영 됨으로써 국가의 중대한 인프라로 구성이 된다. 이런 중대한 인프라 및 그 응용분야는 P.N.T(Positioning, Navigation, Timing) 시스템에 의존하고 있는데 이 P.N.T가 텔레커뮤니케이션(시각동기), 금융시장(시각동기), 물류관리(위치, 항법, 시각동기), 수송(위치, 항법, 시각동기) 등의 버팀목이 된다. 국가적으로 P.N.T 서비스를 지속적으로 사용할 수 있도록 GPS 시스템과 별도의 항법시스템 구축이 필요하여 안정적으로 PNT 서비스를 할 수 있는 시스템 구축에 대한 연구를 하였다.