• Journal of Korean Society of Transportation
• /
• v.21 no.3
• /
• pp.97-106
• /
• 2003

When a route choice is done under uncertainty, a driver has some expectation of traffic conditions that will occur according to the route chosen. This study tries to build a framework in which we can observe the learning behavior of the drivers' expectations of the travel time under nonstationary environment. In order to investigate how drivers have their subjective expectations on traffic conditions in response to public information, a numerical experiment is carried out. We found that rational expectations(RE) formation about the route travel time can be expressed by the adaptive expectation model when the travel time changes in accordance with the nonstationary process which consists of permanent shock and transient shock. Also, we found that the adaptive parameter of the model converges to the fixed value corresponding to the route conditions.

• Journal of the Microelectronics and Packaging Society
• /
• v.18 no.2
• /
• pp.49-55
• /
• 2011

The failure of electronic instruments is mostly caused by heat and shock. This shock causes the crack initiation at the solder joint interface of PCB component which is closely related with the formation of intermetallic compound(IMC). The Ag content in Pb-free Sn-xAg-0.5Cu solder alloy used in this study was 1.0, 1.2 and 3.0 wt.%, respectively. After soldering with PCB component, isothermal aging was performed to 1000 hrs. The growth of IMC layer was observed during isothermal aging. The drop impact property of solder joint was evaluated by impact bending test method. The solder joint made with the solder containing lower Ag content showed better impact bending property compared with that with higher Ag content. On the contrary to this result, the solder joint made with solder containing higher Ag content showed better impact bending property after aging. It should be caused by the formation of fine $Ag_3Sn$, which relieved the impact. It showed consequently the different effect of fine $Ag_3Sn$ and coarse $Cu_6Sn_5$ particles formed in the IMC layer on the impact bending property.

• Journal of the Korean Ceramic Society
• /
• v.38 no.9
• /
• pp.811-816
• /
• 2001

The influence of the incinerated ash and additives on glass phase formation of lightweight aggregate, weight-lightening, and the bloating mechanism was investigated. Clay was used as base materials and incinerated ash was added from 0 to 30wt%. The additives such as $Na_2CO_3,\;CaCo_3,\;K_2CO_3,\;MgCO_3$, and a little amount of waste oil were added to the mixed body. In clay/incinerated ash/additive system, it turned out that $CaCO_3\;and\;MgCO_3$ were the components for glass phase formation and $Na_2CO_3$ was the component for both glass phase formation and weight-lightening. The small addition of waste oil from 0.5wt% to 3.0wt% affect on the bloating of aggregate. Incinerated ash had a good effect on the glass phase controlling. The most effective condition controlling glass phase and bloating of aggregate was 10wt% incinerated ash, 2wt% waste oil at 1200$^{\circ}$C. The bloating mechanism of lightweight aggregate is as follows; 1) micro-crack formation caused by thermal-shock and gas generation from inside of aggregate, 2) volume expansion by glass phase formation on the aggregate surface and rapid gas bloating inside of aggregate, 3) densification after bloating.

• Journal of Periodontal and Implant Science
• /
• v.50 no.3
• /
• pp.159-170
• /
• 2020

Purpose: Immunization with Porphyromonas gingivalis heat shock protein 60 (PgHSP60) may have an immunoregulatory effect on atherogenesis. The aim of this study was to determine whether nasal immunization with a PgHSP60 peptide could reduce atherosclerotic plaque formation in apolipoprotein E knockout (ApoE KO) mice. Methods: Seven-week-old male ApoE KO mice were assigned to receive a normal diet, a Western diet, a Western diet and challenge with PgHSP60-derived peptide 14 (Pep14) or peptide 19 (Pep19), or a Western diet and immunization with Pep14 or Pep19 before challenge with Pep14 or Pep19. Results: Atherosclerotic plaques were significantly smaller in mice that received a Western diet with Pep14 nasal immunization than in mice that received a Western diet and no Pep14 immunization with or without Pep14 challenge. An immunoblot profile failed to detect serum reactivity to Pep14 in any of the study groups. Stimulation by either Pep14 or Pep19 strongly promoted the induction of CD4⁺CD25⁺ forkhead box P3 (FoxP3)⁺ human regulatory T cells (Tregs) in vitro. However, the expression of mouse splenic CD4⁺CD25⁺FoxP3⁺ Tregs was lower in the Pep14-immunized mice than in the Pep14-challenged or Pep19-immunized mice. Levels of serum interferon gamma (IFN-γ) and transforming growth factor beta were higher and levels of interleukin (IL) 10 were lower in the Pep14-immunized mice than in the other groups. Induction of CD25^- IL-17⁺ T helper 17 (Th17) cells was attenuated in the Pep14-immunized mice. Conclusions: Nasal immunization with Pep14 may be a mechanism for attenuating atherogenesis by promoting the secretion of IFN-γ and/or suppressing Th17-mediated immunity.

• Journal of Embryo Transfer
• /
• v.32 no.3
• /
• pp.65-71
• /
• 2017

The elevated temperature and high humidity has been known as main reason for heat stress on animals and cause detrimental effects on productivity of organisms and physiological conditions of normal bioactivities. The aims of this study were to evaluate the relationship between time of heat shock simulation during in vitro maturation and developmental competence of subsequent embryo after in vitro fertilization. Heat shocked cumulus-oocyte complexes (COCs) of Korean native cattle were subjected to normal conditions for 22, 21, 18 and 12 h respectively and transferred to heat stress inducing condition at $40.5^{\circ}C$ in other incubator for 0 (control), 1 and 4 h. After maturation for 22 h, the oocytes were fertilized and cultured in mSOF media for 8 d and examined the developmental capacity of embryos. There were no differences in maturation and cleavage rates between 0, 1 and 4 h heat socked oocytes, but blastocysts formation were lower in the 4 h heat stressed oocytes. The apoptotic cells of developed blastocysts were also increased in at day 8 with 4 h heat shocked oocytes. These results indicate that heat shock on oocytes during maturation could cause negative effects on the developmental competence of embryos.

• Molecules and Cells
• /
• v.28 no.3
• /
• pp.175-181
• /
• 2009

In hypertriglyceridaemic individuals, atherosclerogenesis is associated with the increased concentrations of very low density lipoprotein (VLDL) and VLDL-associated remnant particles. In vitro studies have suggested that VLDL induces foam cells formation. To reveal the changes of the proteins expression in the process of foam cells formation induced by VLDL, we performed a proteomic analysis of the foam cells based on the stimulation of differentiated THP-1 cells with VLDL. Using two-dimensional gel electrophoresis (2-DE) and matrix-assisted laser-desorption ionization time-of-flight mass spectrometry (MALDI-TOF MS) analysis, 14 differentially expressed proteins, containing 8 up-regulated proteins and 6 down-regulated proteins were identified. The proteins are involved in energy metabolism, oxidative stress, cell growth, differentiation and apoptosis, such as adipose differentiation-related protein (ADRP), enolase, S100A11, heat shock protein 27 and so on. In addition, the expression of some selected proteins was confirmed by Western blot and RT-PCR analysis. The results suggest that VLDL not only induces lipid accumulation, but also brings about foam cells diverse characteristics by altering the expression of various proteins.

• Animal cells and systems
• /
• v.1 no.2
• /
• pp.329-335
• /
• 1997

The final pattern of the skeletal muscle of a vertebrate depends on the position-specific behavior of the muscle precursor cells during early developmental process and the abdominal muscle is made of cells which migrate a relatively long distance from their original tissue, myotome of dorsal mesoderm. We report the spatia-temporal migration pattern of abdominal muscle in Xenopus laevis by in situ hybridization and immunohistological studies. Shortly after hatching tadpole stage (stage 31/32), a group of myotomal cells detaches from the lower tip of the second somite and migrates ventrally to the lower position of abdomen. At stage 34/35, a second cell group migrates away from the third somite. Total 7 myotomal cell groups migrate ventrally one by one from the second to eighth myotome along their own pathways through the cell free space located between epidermis and subepidermal layer of the abdomen. During migration, the sizes of the cell groups (abdominal muscle anlagens) are increased to several tens fold. Around stage 40 all the abdominal muscle anlagens reaches their final positions and are interconnected side by side rostrocaudally. They are also connected to other types of muscles, forming a large multisegmented abdominal muscle. Heat shock study suggests that the disruption of segmentation of somites does not block the detachment of abdominal muscle anlagen, though the treatment gave stage- and dosagedependent effects on the migration speed.

• The Research Journal of the Costume Culture
• /
• v.21 no.6
• /
• pp.967-973
• /
• 2013

During high speed sewing, the needle thread is exposed to dynamic loading, short strike loading, inertia forces, friction, rubbing, force of check spring, bending, pressure, friction, impact, shock and thermal influence. The dynamic thread loading/tension alters throughout the stitch formation cycle and along its passage through the machine. The greatest tensile force occurs at the moment of stitch stretching, when the take up lever pulls for required thread length through the tension regulator. These stresses act on the thread repeatedly and the thread passes 50-80 times through the fabric, the needle eye and the bobbin case mechanism, before getting incorporated into the seam, which result in upto 40% loss in tensile strength of the sewing thread. This damage in the sewing thread adversely affects its processing and functional performance. In this paper, the contribution of dynamic loading, passage through needle and fabric, and bobbin thread interaction in the loss in tensile properties has been studied. It is observed that the loss in tensile properties occurs mainly due to the bobbin thread interaction. Dynamic loading due to the action of take up lever also causes substantial loss in tenacity and breaking elongation of cotton threads.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.23 no.5
• /
• pp.447-451
• /
• 2001

With the exception of gun shot wound, the incidence of penetrating injury of face and neck areas nonorganic foreign bodies is relative low. But the diagnostic evaluation and therapeutic management of penetrating facial wounds need careful decision, when the anatomic proximity of the major vessels and nerve is considered. Penetrating facial trauma with concomitant vascular injury present challenging problems, the immediate complication of this vascular injury are severe bleeding, hematoma formation, shock, obstruction of airway. The vascular injury is conformed by angiography. In this report, a industrial tool(long tack) fired by explosive air is penetrated into face and to neck. In angiograms penetrating injury of the vertebral artery is detected. We performed the embolization of the vertebral artery with coils and manual removal of the foreign body without any complication was followed.

• Proceedings of the KSME Conference
• /
• 2004.11a
• /
• pp.1201-1206
• /
• 2004

Sonoluminescence (SL) characteristics such as pulse shape, radiance and spectrum radiance from submicron bubbles were investigated. In this study, a set of analytical solutions of the Navier-Stokes equations for the gas inside bubble and equations obtained from mass, momentum and energy equations for the liquid layer adjacent the bubble wall were used to estimate the gas temperature and pressure at the collapse point, which are crucial parameters to determine the SL characteristics. Heat transfer inside the gas bubble as well as at the liquid boundary layer, which was not considered in the most of previous studies on the sonoluminescence was taken it into account in the calculation of the temperature distribution inside the bubble. It was found that bremsstrahlung is a very possible mechanism of the light emission from either micron or submicron bubbles. It was also found that the peak temperature exceeding $10^{6}$ K in the submicron bubble driven at 1 MHz and 4 atm may be due to the rapid change of the bubble wall acceleration near the collapse point rather than shock formation.