• Journal of the Korean Society for Marine Environment & Energy
• /
• v.16 no.3
• /
• pp.181-188
• /
• 2013

The increase of carbon dioxide ($CO_2$) emission is known as one of the major causes of global warming, and it has a strong influence on the global environment. Therefore many researchers and politicians have tried to regulate the $CO_2$ emission. In regards to the matter, the IMPACT (Inclusive Marine Pressure Assesment and Classification Technology) committee under the Japan Society of Naval Architects and Ocean Engineers (JASNAOE) has developed an inclusive environmental impact assessment index, so-called "Triple I(III)", in order to assess the environmental impact including economic factors due to the artificial development of marine. In this study, III was applied to compare between the environmental impact of $CO_2$ emitted by container vessels during their life-cycle period and economic benefit due to their operating. Furthermore, III was also applied to assess the comprehensive environmental impact for the cases with various capacities of container vessels and different sailing route. From the results, the case for shortening of the sailing route is more effective to get the advantageous assessment results of III than the case for varying the size of vessels.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.47 no.4
• /
• pp.281-289
• /
• 2011

The purpose of this study is to identify the flow resistance of the bottom trawl net. The bottom trawl net being used in the training ship of Chonnam National University was selected as a full-scale net, and model nets such as 1/10, 1/25 and 1/50 of the actual net were made. Total resistance of the net part, the height of the net mouth and the flow resistance of components of the net such as wing, bag and cod-end part was measured, converted into full-scale and compared. Additionally, the model rule of Tauti (1934), which has been most frequently used in fishing net modeling experiments, was applied to interpret flow resistance and scale effect of model experiment was investigated. Presumed that the flow resistance R is $R=kS{\upsilon}^2$ against the flow velocity of each net ${\upsilon}$, resistance coefficient k was calculated by substituting R, ${\upsilon}$ and S of the net. From the result, it was found that k decreases exponentially when u increases which makes $k=c{\upsilon}^{-m}$. Whereas m of each net is ranged between 0.13-0.16 and there was not significant difference between nets. c does not show big difference in 1/10 and 1/25 model and the value itself was relatively bigger than in 1/50 model. The height of the net mouth of 1/25 and 1/50 model net h decreases exponentially according as ${\upsilon}$ increases to make $h=d{\upsilon}^{-n}$. Whereas d and n values were almost same in two nets. Additionally, when resistance of cod-end, wing and bag part in 1/25 and 1/50 model nets, both nets showed big resistance in bag part when flow is 1m/s as more than 60%. Wing and cod-end part showed almost same value or wing part had little bit larger value. On the other hand, when reviewing the reasons why both models showed difference in 1/50 model while c value against the resistance coefficient k did not show big difference in 1/10 and 1/25 model, it is inferred that the difference occurred not from material difference but from the difference in net size according to scale. It was judged that they are the scale effects concomitant to the model experiments.

• Proceedings of KOSOMES biannual meeting
• /
• 2009.06a
• /
• pp.105-111
• /
• 2009

Marine pollution prevention manager system has been operated for the purpose of preventing marine pollution from ships and marine facilities in Korea. As a new "marine environment management act" replacing an old "marine pollution prevention act" had entered into force from January 20, 2008, the works and business of the education and training courses for marine pollution prevention manager are scheduled to transfer from KIMFT(Korea Institute of Maritime and Fisheries Technology) and FHRDI(Fisheries Human Resource Development Institute) to KOEM(Korea Marine Environment Management Corporation) on January 1, 2011. The present state of the education and training for marine pollution prevention managers on board ships was surveyed and analyzed In order to prospect trainee demands for the education and training and to provide KOEM with basic data for establishing a new system for the education and training. The existing education and training courses of KIMFT for marine pollution prevention manager on board ships are classified into a regular course of 21 classes for 3 days, a reeducation course of 18 classes for 2 days and a NLS course of 17 classes for 2days. The annual numbers of trainees in 2008 were 516 persons for regular course, 1085 persons for reeducation course and 135 persons for NLS course in KIMFT. The trainee demands for the education and training were attempted to be predicted on a basis on annual increase rate of ships. The predicted demands for the education and training are changeable depending on the major factors such shipping market, naval architecture industry, etc.

• Journal of Korean Society of Environmental Engineers
• /
• v.38 no.7
• /
• pp.387-394
• /
• 2016

Commercial 28 algae removal technologies that have been applied in domestic rivers and lakes with green tide were investigated, analyzed and classified. The classification of algae removal technologies was based on the three criteria (i.e., principle, flow rate of water body, and application period). Also, algae removal technologies were evaluated in terms of cost effectiveness, field applicability, effect durability, and eco friendliness. From the analysis results, technologies using physical, chemical, biological, and convergent controls were 32.2%, 25%, 21.4%, and 21.4%, respectively. The 75% of technologies have been applied to stagnant water body (${\leq}0.2m/s$). Also, algae harvesting ship with dissolved air flotation, conveyor belt and filtration processes and natural floating coagulant were found to have better field applicability, compared to other technologies. However, proper algae removal technology in specific rivers and lakes should be chosen after the evaluation of long-term pilot scale field test. Also, development of energy and resource recovery technologies from algae biomass is warranted.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.11
• /
• pp.78-87
• /
• 2017

Recently, the quality of a product or system has becoming increasingly important as it means customer satisfaction. The function, which is recognized as a nature of this quality, means how it functions well so it is the closest to the customer satisfaction. On the other hand, it is becoming more important as safety is closely related to destruction or human injury from accidents for engineers who handle large-scaled structures, such as ships. This study analyzed the function using quality function development (QFD) and considering the function and safety, which are being recognized as important in the structure. In addition, the safety and the quality analysis method based on the customers' needs was analyzed using failure mode and influence analysis (FMEA). In addition, the supplementary materials that are important in terms of the aspect of safety and function for the quality enhancement of a hatchway system were determined by applying a bulk carrier and hatchway. As a result, there are commonly understood items in important supplementary materials and parts, which are determined individually in terms of function and safety, because they can enhance both the function and safety simultaneously. This study shows that designers can improve the quality of products and systems by enhancing these supplementary materials and parts with greater interest.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.5
• /
• pp.93-102
• /
• 2020

The design of large complex mechanical systems, such as automobile, aircraft, and ship, is a kind of Multidisciplinary Design Optimization (MDO) because it requires both experience and expertise in many areas. With the rapid development of technology and the demand to improve human convenience, the complexity of these systems is increasing further. The design of such a complex system requires an integrated system design, i.e., MDO, which can fuse not only domain-specific knowledge but also knowledge, experience, and perspectives in various fields. In the past, the MDO relied heavily on the designer's intuition and experience, making it less efficient in terms of accuracy and time efficiency. Process integration and the design optimization framework mainly support MDO owing to the evolution of IT technology. This paper examined the procedure and methods to implement an efficient MDO with reasonable effort and time using RCE, an open-source PIDO framework. As a benchmarking example, the authors applied the proposed MDO methodology to a bulk carrier's conceptual design synthesis model. The validity of this proposed MDO methodology was determined by visual analysis of the Pareto optimal solutions.

• Proceedings of KOSOMES biannual meeting
• /
• 2006.11a
• /
• pp.175-179
• /
• 2006

With the rapid development of oil and chemical industry in the late 20C, massive transportation of oil by oil tanker vessel has grown and it caused the big oil pollution accidents. When oil spill from the oil tanker, damages reach into the astronomical figures in economically and damages affect wide area and many people with break the balance of ecosystem. Recently in Korea, the oil pollution accidents has occurred frequently as growing of oil consumption and it caused large-scale damages to the victim. Oil pollution in Korean offshore takes not only korean fishermen from their life ground and break the ecosystem but it takes too much time and money to recover. To minimize oil pollution damages, it is necessary to make pre-caution effort as a ship owner and relevant government bodies should endeavor to prevent from more damages. But once oil pollution accidents occurs in territorial sea, compensation for victim fishermen is very important. But it is true that compensation is not paid to victim smoothly. So this study aims at the problems of oil pollution compensation to the Korean victim and find the best way to get reasonable compensation.

• Journal of Navigation and Port Research
• /
• v.30 no.6 s.112
• /
• pp.465-470
• /
• 2006

Nowadays, vessel's size is tending to bigger, Therefore port facilities are developed according to this trend, which has been shown in the competition of Hub-Port among the main ports such as Port of Busan and Port of Shanghai. However there are the limited number of large containerships more specifically so 70% of the total ships calling at Busan Port are small and medium sized ships which are less than 20,000 ton As a result, it is necessary to consider the handling facilities of these ships which had been disregarded The big size of facilities increases handling cost bemuse of high investment so it is possible for small and medium sized ships to have disadvantages financially and avoid calling. In this paper, we estimate the propriety of utilization of crane and labor according to the size of vessels after analyzing time value cost, reflecting the size of vessels, size and number of crane and labor structure, and container handling cost value.

• Journal of Navigation and Port Research
• /
• v.30 no.3 s.109
• /
• pp.173-179
• /
• 2006

A number of perforated plates are utilized for the passage of the crew and the equipment, reducing weight and the arrangement of piping. Hull girders in double bottom and floor plates are the typical parts which have those plates in a ship structure, and the perforated plate is usually positioned at the place which has less loading without local strength problems. In the case of utilizing the plate inevitably at the place which has large strength, an opening of the plate has large effect on the buckling strength due to in-plane rigidity and ultimate strength. Therefore the assessments of the elastic buckling strength and the ultimate strength for the perforated plate are the essential requirements for determining the dimensions of the parts at the initial design stage. With above reason, a need of the reasonable assessments for the elastic buckling strength and the ultimate strength has evolved. The numerical series analysis with the consideration of the effect due to various aspect ratios and slenderness ratios were performed using finite element method in this research. Simple formulas for the design are also proposed from the above analysis.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.12
• /
• pp.2249-2260
• /
• 2017

IMO (International Maritime Organization) has been providing GMDSS (Global Maritime Distress and Safety System) and mandating to install distress and safety systems according to SOLAS. Digital-HF(High-Frequency) coast station communication system maintains interoperability between ship and coast station and digital data exchange in maritime mobile service by digitizing existing analog base voice communication. In this paper, we analyze ITU-R M. 1798-1 established by ITU for digital HF communications and propose Advanced annex2 and new Annex 5 to improve the problems of the existing Annex 2 and Annex 4. The proposed OFDM protocol basically adopts ARQ (Automatic Retransmission Request) which retransmits when an error occurs in a half-duplex manner between an information transmitting side (ISS) and an information receiving side (IRS) and we propose a digital HF communication system and its operational concept which is more reliable and superior than the existing ITU-R M. 1798 by implementing technical development on implementation and performance improvement.