• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.58 no.1
• /
• pp.57-66
• /
• 2013

The purpose of this study was to investigate the effects of shifts in sowing time on the ecological responses, growth and yields of major soybean cultivars in a southern region of South Korea. Experiments were carried out in Naju, Jeonnam Province (latitude $35^{\circ}$ 04'N, longitude $126^{\circ}$ 54'E) for three years from 2008 to 2010. The test cultivars included Saeol-kong and Tawon-kong of the summer type, Taekwang-kong and Pungsannamul-kong, and Cheongja3 of the autumn type. Sowing took place on May 15 and 30, June 15 and 30, and July 15 of each year. Of the summer type soybean cultivars, Saeol-kong showed a smaller curtailment in days from sowing to flowering, days from flowering to maturity, and days from sowing to maturity according to sowing time postponement than Tawon-kong. Of the autumn type soybean cultivars, Taekwang-kong exhibited a lower photoperiodic response in reproductive growth period than Pungsannamul-kong and Cheongja3, both of which recorded higher level photoperiodic responses in vegetative growth stages and reproductive growth periods than other test cultivars, with the former exhibiting higher levels than the latter. Most of the test cultivars tended to decrease in stem length, node numbers of the main stem, and stem diameter according to postponed sowing time, but there were no significant differences in stem length and node numbers of the main stem of the Saeol-kong cultivar. Differences in sowing times did not affect the first setting pod node order of Saeol-kong and Tawon-kong summer type cultivars of internode lengths of all of the test cultivars. All of the test cultivars tended to show decreases in pod number per plant due to postponement of sowing time except for the Saeol-kong cultivar. The variation was more prominent in small grain cultivars such as Tawon-kong and Pungsannamul-kong with the latter autumn type cultivar showing especially large variation. Yields were the greatest for the Tawon-kong, Taekwang-kong, and Pungsannamul-kong cultivars sown on May 30 and Cheongja3 sown on May 30 and June 15. There were no significant differences in the yields of Saeol-kong for different sowing times from May 30 to July 15, with the yields lowest for the batch sown on May 15.

• The Journal of Korean Society for Radiation Therapy
• /
• v.29 no.1
• /
• pp.7-18
• /
• 2017

Purpose: A QA Set was established to verify the movement accuracy of image-guided 6DoF Couch and to evaluate its usefulness. Materials and Methods: Two sets of linear accelerators equipped with 6DoF Couch and CBCT were used. Using the established QA Set, each CBCT image was obtained over 15 times through the Penta-Guide Phantom installed with off-set shift values along six translational (Translation; TX, TY, TZ) and rotational (Rotation, Pitch; RX, Roll; RY, Yaw; RZ) directions. Using this method, we compared the reference image and the registration image, and we analyzed the error calculated by measuring the positional accuracy of the modified 6DoF Couch. Results: The Air Cavity corresponding to the Pixel of the reference image and the registration image were all contained between 30 and 66, and the revealing high registration accuracy. Error between the modified off-set value of 6DoF Couch and the measured value along translational directions were $0.25{\pm}0.18mm$ in the TX direction, $0.25{\pm}0.25mm$ in the TY direction, and $0.36{\pm}0.2mm$ in the TZ direction. Misalignments along the rotational axis were $0.18{\pm}0.08^{\circ}$ in the RX direction, $0.26{\pm}0.09^{\circ}$ in the RY direction, and $0.11{\pm}0.08^{\circ}$ in the RZ direction, it was corrected precisely for any value. Conclusion: Using the YCC QA Set, we were able to verify the error of 6DoF Couch along both the translational and rotational directions in a very simple method. This system would be useful in performing Daily IGRT QA of 6DoF Couch.

• Journal of Intelligence and Information Systems
• /
• v.21 no.1
• /
• pp.47-63
• /
• 2015

As knowledge is paid attention as a new production factor that generates added value, studies continue to apply knowledge management to business environment. In addition, as ICT (Information Communication Technology) was engrafted in business environment, it leads to increasing task efficiency and productivity of individual workers. Accordingly, the way that a business achieves its goal has changed to one in which its individual members are willing to take part in the organization and share information to create new values (Han, 2003) and studies for the system and service to support such transition are carrying out. Of late, a new concept called 'Enterprise 2.0' newly appears. It is the extension of Wen 2.0 and its technology, which focus on participation, sharing and openness, to the work environment of a business (Jung, 2013). Enterprise 2.0 is being used as a collaborative tool to prop up individual creativity and group brain power by combining Web 2.0 technologies such as blog, Wiki, RSS and tag with business software (McAfee, 2006). As Tweeter gets popular, Enterprise Microblog (EMB), which is an example of Enterprise 2.0 for business, has been developed as equivalent to Tweeter in business circle and SaaS (Software as a Service) such as Yammer was introduced The studies of EMB mainly focus on demonstrating its usability in terms of intra-firm communication and knowledge management. However existing studies lean too much towards large-sized companies and certain departments, rather than a company as a whole. Therefore, few studies have been conducted on small and medium-sized companies that have difficulty preparing separate resources and supplying exclusive workforce to introduce knowledge management. In this respect, the present study placed its analytic focus on small-sized companies actually equipped with EMB to know how they use it. And, based on the findings, this study examined their knowledge management strategies for EMB from the point of codification and personalization. Hypothesis -"as a company grows, it shifts EMB strategy from codification to personalization'- was established on the basis of reviewing precedent studies and literature. To demonstrate the hypothesis, this study analyzed the usage of EMB by small companies that have used it from foundation. For case study, the duration of the use was divided into 2 spans and longitudinal analysis was employed to examine the contents of the blogs. Using the key findings of the analysis, this study is aimed to propose practical implications for the operation of knowledge management of small-sized company and the suitable application of knowledge management system for operation Knowledge Management Strategy can be classified by codification strategy and personalization strategy (Hansen et. al., 1999), and how to manage the two strategies were always studied. Also, current studies regarding the knowledge management strategy were targeted mostly for major companies, resulting in lack of studies in how it can be applied on SMEs. This research, with the knowledge management strategy suited for SMEs, sets an Enterprise Microblog (EMB), and with the EMB applied on SMEs' Knowledge Management Strategy, it is reviewed on the perspective of SMEs' Codification and Personalization Strategies. Through the advanced research regarding Knowledge Management Strategy and EMB, the hypothesis is set that "Depending on the development of the company, the main application of EMB alters from Codification Strategy to Personalization Strategy". To check the hypothesis, SME that have used the EMB called 'Yammer' was analyzed from the date of their foundation until today. The case study has implemented longitudinal analysis which divides the period when the EMBs were used into three stages and analyzes the contents. As the result of the study, this suggests a substantial implication regarding the application of Knowledge Management Strategy and its Knowledge Management System that is suitable for SME.

• Asia pacific journal of information systems
• /
• v.20 no.1
• /
• pp.81-99
• /
• 2010

Lately, in consumers' markets the number of new items is rapidly increasing at an overwhelming rate while consumers have limited access to information about those new products in making a sensible, well-informed purchase. Therefore, item providers and customers need a system which recommends right items to right customers. Also, whenever new items are released, for instance, the recommender system specializing in new items can help item providers locate and identify potential customers. Currently, new items are being added to an existing system without being specially noted to consumers, making it difficult for consumers to identify and evaluate new products introduced in the markets. Most of previous approaches for recommender systems have to rely on the usage history of customers. For new items, this content-based (CB) approach is simply not available for the system to recommend those new items to potential consumers. Although collaborative filtering (CF) approach is not directly applicable to solve the new item problem, it would be a good idea to use the basic principle of CF which identifies similar customers, i,e. neighbors, and recommend items to those customers who have liked the similar items in the past. This research aims to suggest a hybrid recommendation procedure based on the preference boundary of target customer. We suggest the hybrid recommendation procedure using the preference boundary in the feature space for recommending new items only. The basic principle is that if a new item belongs within the preference boundary of a target customer, then it is evaluated to be preferred by the customer. Customers' preferences and characteristics of items including new items are represented in a feature space, and the scope or boundary of the target customer's preference is extended to those of neighbors'. The new item recommendation procedure consists of three steps. The first step is analyzing the profile of items, which are represented as k-dimensional feature values. The second step is to determine the representative point of the target customer's preference boundary, the centroid, based on a personal information set. To determine the centroid of preference boundary of a target customer, three algorithms are developed in this research: one is using the centroid of a target customer only (TC), the other is using centroid of a (dummy) big target customer that is composed of a target customer and his/her neighbors (BC), and another is using centroids of a target customer and his/her neighbors (NC). The third step is to determine the range of the preference boundary, the radius. The suggested algorithm Is using the average distance (AD) between the centroid and all purchased items. We test whether the CF-based approach to determine the centroid of the preference boundary improves the recommendation quality or not. For this purpose, we develop two hybrid algorithms, BC and NC, which use neighbors when deciding centroid of the preference boundary. To test the validity of hybrid algorithms, BC and NC, we developed CB-algorithm, TC, which uses target customers only. We measured effectiveness scores of suggested algorithms and compared them through a series of experiments with a set of real mobile image transaction data. We spilt the period between 1st June 2004 and 31st July and the period between 1st August and 31st August 2004 as a training set and a test set, respectively. The training set Is used to make the preference boundary, and the test set is used to evaluate the performance of the suggested hybrid recommendation procedure. The main aim of this research Is to compare the hybrid recommendation algorithm with the CB algorithm. To evaluate the performance of each algorithm, we compare the purchased new item list in test period with the recommended item list which is recommended by suggested algorithms. So we employ the evaluation metric to hit the ratio for evaluating our algorithms. The hit ratio is defined as the ratio of the hit set size to the recommended set size. The hit set size means the number of success of recommendations in our experiment, and the test set size means the number of purchased items during the test period. Experimental test result shows the hit ratio of BC and NC is bigger than that of TC. This means using neighbors Is more effective to recommend new items. That is hybrid algorithm using CF is more effective when recommending to consumers new items than the algorithm using only CB. The reason of the smaller hit ratio of BC than that of NC is that BC is defined as a dummy or virtual customer who purchased all items of target customers' and neighbors'. That is centroid of BC often shifts from that of TC, so it tends to reflect skewed characters of target customer. So the recommendation algorithm using NC shows the best hit ratio, because NC has sufficient information about target customers and their neighbors without damaging the information about the target customers.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2011.04a
• /
• pp.1-2
• /
• 2011

Hybrid rockets have lately attracted attention as a strong candidate of small, low cost, safe and reliable launch vehicles. A significant topic is that the first commercially sponsored space ship, SpaceShipOne vehicle chose a hybrid rocket. The main factors for the choice were safety of operation, system cost, quick turnaround, and thrust termination. In Japan, five universities including Hokkaido University and three private companies organized "Hybrid Rocket Research Group" from 1998 to 2002. Their main purpose was to downsize the cost and scale of rocket experiments. In 2002, UNISEC (University Space Engineering Consortium) and HASTIC (Hokkaido Aerospace Science and Technology Incubation Center) took over the educational and R&D rocket activities respectively and the research group dissolved. In 2008, JAXA/ISAS and eleven universities formed "Hybrid Rocket Research Working Group" as a subcommittee of the Steering Committee for Space Engineering in ISAS. Their goal is to demonstrate technical feasibility of lowcost and high frequency launches of nano/micro satellites into sun-synchronous orbits. Hybrid rockets use a combination of solid and liquid propellants. Usually the fuel is in a solid phase. A serious problem of hybrid rockets is the low regression rate of the solid fuel. In single port hybrids the low regression rate below 1 mm/s causes large L/D exceeding a hundred and small fuel loading ratio falling below 0.3. Multi-port hybrids are a typical solution to solve this problem. However, this solution is not the mainstream in Japan. Another approach is to use high regression rate fuels. For example, a fuel regression rate of 4 mm/s decreases L/D to around 10 and increases the loading ratio to around 0.75. Liquefying fuels such as paraffins are strong candidates for high regression fuels and subject of active research in Japan too. Nakagawa et al. in Tokai University employed EVA (Ethylene Vinyl Acetate) to modify viscosity of paraffin based fuels and investigated the effect of viscosity on regression rates. Wada et al. in Akita University employed LTP (Low melting ThermoPlastic) as another candidate of liquefying fuels and demonstrated high regression rates comparable to paraffin fuels. Hori et al. in JAXA/ISAS employed glycidylazide-poly(ethylene glycol) (GAP-PEG) copolymers as high regression rate fuels and modified the combustion characteristics by changing the PEG mixing ratio. Regression rate improvement by changing internal ballistics is another stream of research. The author proposed a new fuel configuration named "CAMUI" in 1998. CAMUI comes from an abbreviation of "cascaded multistage impinging-jet" meaning the distinctive flow field. A CAMUI type fuel grain consists of several cylindrical fuel blocks with two ports in axial direction. The port alignment shifts 90 degrees with each other to make jets out of ports impinge on the upstream end face of the downstream fuel block, resulting in intense heat transfer to the fuel. Yuasa et al. in Tokyo Metropolitan University employed swirling injection method and improved regression rates more than three times higher. However, regression rate distribution along the axis is not uniform due to the decay of the swirl strength. Aso et al. in Kyushu University employed multi-swirl injection to solve this problem. Combinations of swirling injection and paraffin based fuel have been tried and some results show very high regression rates exceeding ten times of conventional one. High fuel regression rates by new fuel, new internal ballistics, or combination of them require faster fuel-oxidizer mixing to maintain combustion efficiency. Nakagawa et al. succeeded to improve combustion efficiency of a paraffin-based fuel from 77% to 96% by a baffle plate. Another effective approach some researchers are trying is to use an aft-chamber to increase residence time. Better understanding of the new flow fields is necessary to reveal basic mechanisms of regression enhancement. Yuasa et al. visualized the combustion field in a swirling injection type motor. Nakagawa et al. observed boundary layer combustion of wax-based fuels. To understand detailed flow structures in swirling flow type hybrids, Sawada et al. (Tohoku Univ.), Teramoto et al. (Univ. of Tokyo), Shimada et al. (ISAS), and Tsuboi et al. (Kyushu Inst. Tech.) are trying to simulate the flow field numerically. Main challenges are turbulent reaction, stiffness due to low Mach number flow, fuel regression model, and other non-steady phenomena. Oshima et al. in Hokkaido University simulated CAMUI type flow fields and discussed correspondence relation between regression distribution of a burning surface and the vortex structure over the surface.

• Journal of the Korean Magnetics Society
• /
• v.5 no.5
• /
• pp.864-873
• /
• 1995

Amorphous $Fe_{73.5}Cu_{1}Nb_{3}Si_{16.5}B_{6}$ ribbons were annealed for different time at $500^{\circ}C$ and $552^{\circ}C$, just before and after the exothermic reaction in DSC curve. The development of nanocrystalline phase was investigated by means of $M\"{o}ssbsuer$ spectroscopy. The crystalline phase consists mainly of $DO_{3}Fe-Si$. Though slight in amount (5%), another ferromagnetic phase which could be presumed $t-Fe_{3}B$ was detected Si content of $DO_{3}Fe-Si$, Si/(Fe+Si), was 0.218 under the heat treatment at $500^{\circ}C$ for 60 min and 0.222 at $552^{\circ}C$ for 10 min. Since then both of those values decreased with time until 120 min and finally these two values remained constant at 0.210. The variation in Si content with annealing time results in the variation in the hyperfine field and the isomer shift. The increase in the mean hyperfine fields and the decrease in the mean isomer shifts of Fe-Si are caused by the increase in Si content. The volume fractions of residual amorphous phase rapidly decrease during the early stage of annealing and come nearer to saturation after 120 min both at $500^{\circ}C$ and $552^{\circ}C$. The decrease in the mean hyperfine field of residual amorphous. in spite of slight changes in the volume fractions of Fe-Si and of residual amorphous after 120 min. is caused by the increase in the content of Nb and B in residual amorphous phase. The saturated volume fraction of the crystalline phase was 81% for $500^{\circ}C$ (180 min) and 77% for $552^{\circ}C$ (960 min), different from expectation.

• Journal of the Mineralogical Society of Korea
• /
• v.31 no.4
• /
• pp.295-306
• /
• 2018

Despite the utility of solid-state NMR, NMR studies of iron-bearing silicate glasses remain a challenge because the variations in the peak position and width with increasing iron content reflect both paramagnetic effect and iron-induced structural changes. Therefore, it is essential to elucidate the effect of temperature on the NMR signal for iron-bearing silicate glasses. Here, we report the $^{29}Si$ and $^{27}Al$ MAS NMR spectra for $(Mg_{0.95}Fe_{0.05})SiO_3$ and $Fe_2O_3$-bearing $CaAl_2Si_2O_8$ (anorthite) glasses with varying spinning speed to interpret the NMR spectra for iron-bearing silicate glasses. The increase in the spinning speed results in an increase in the sample temperature. The current NMR results allow us to understand the origins of the changes in NMR signal with increasing iron content and to provide information on the dipolar interaction between nuclear spins. The $^{29}Si$ NMR spectra for $(Mg_{0.95}Fe_{0.05})SiO_3$ glass and $^{27}Al$ NMR spectra for $Fe_2O_3$-bearing $CaAl_2Si_2O_8$ glasses show that the peak shape and position of iron-bearing glasses do not change with increasing spinning speed up to 30 kHz. These results suggest that the NMR signal in the Fe-bearing glasses may stem from the 'survived nuclear spins' beyond the cutoff radius from the Fe, not from the paramagnetic shift. Based on the current results, the observed apparent shifts toward lower frequency of Al peak for $Fe_2O_3$-bearing $CaAl_2Si_2O_8$ glasses with increasing $Fe_2O_3$ at all spinning speed (15 kHz to 30 kHz) indicate the increase in the fraction of ${Q^4}_{Al}$(nSi) with lower n (i.e., 1 or 2) with increasing $Fe_2O_3$ and the spatial proximity between Fe and ${Q^4}_{Al}$(nSi) with higher n (i.e., 3 or 4). The present results show that changes in the NMR signal for iron-bearing silicate glasses reflect the actual iron-induced structural changes. Thus, it is clear that the applications of solid-state NMR for iron-bearing silicate glasses hold strong promise for unraveling the atomic structure of natural silicate glasses.

• Journal of Korea Society of Industrial Information Systems
• /
• v.24 no.1
• /
• pp.45-63
• /
• 2019

The number of domestic construction company is expanding every year while the construction workers' exposure to disaster risk is increasing due to technological advancements and popularity of high-rise buildings. In particular, the industry faces greater fatalities and severe large scale accidents because of construction industry characteristics including influx of foreign workers with different language and culture, large number of aged workers, outsourcing, high place work, heavy machine construction. The construction industry is labor-intensive, which is to be completed under given timeline and consists of unique working environment with a lot of night shifts. In addition, when a fixed construction budget is not secured, there is less investment in safety management resulting in poor risk management at the construction site. Taking account that the construction industry has higher accident risk rate and fatality rate, risky and unique working environment, and various labor pool from foreign to aged workers, preemptive safety management through risk factor identification is a mandatory requirement for the construction industry and site. The study analyzes about 8,500 cases of construction accidents that occurred over the past 10 years and identified risk factor by construction industry sector to secure a systematic insight for risk management. Based on interrelation analysis between accident types, work types, original cause materials and assailing materials, there is correlation between each analysis factor and work industry. Especially for work types, there is great correlation between work tasks and industry type. For reinforced concrete and earthwork are among the most frequent types of accidents, and they are not only high in frequency of accidents, but also have a high risk in categories of occurrence.

• Journal of Haehwa Medicine
• /
• v.27 no.1
• /
• pp.9-20
• /
• 2018

Objectives : Ten heavenly stems(10天干) and Twelve earthly branches(12地支) are symbols exposing change order in heaven and earth, and are a very important sign in studying oriental philosophy and oriental medicine. Especially, 10 heavenly stems(10天干) and 12 earthly branches(12地支) are indispensable for the study of Five Circuits And Six Qi(오운육기), and a deep study is needed. Methods : I have examined Yin Yang combination(음양배합), Five elements combination(오행배합), Six Qi 3Yin 3Yang combination(육기삼음삼양배합), viscera combination(장부배합), Mutual collision(상충), Six combination(육합), Three combination(삼합), etc. of 12 earthly branches(12지지) by referring to books such as "Yellow Emperor Internal Classic" ("黃帝內經") and "Principle of universe change" ("우주변화의 원리"). Results & Conclusions : Zi Yin Chen Wu Shen Xu(子 寅 辰 午 申 戌) become Yang(陽), Chou Mao Si Wei You Hai(丑 卯 巳 未 酉 亥) become Yin(陰), Zi Si Yin Mao Chen Si(子 丑 寅 卯 辰 巳) become Yang, and Wu Wei Shen You Xu Hai(午 未 申 酉 戌 亥) become Yin. Twelve earthly branches can be divided into five movements by its original meaning, where YinMao(인묘) is tree, SiWu(사오) is a fire, ShenYou(신유) is a gold, HaiZi(해자) is water, and ChenXuChouWei(진술축미) mediate in the middle of four movements So they become soil(土). SiHai(巳亥) is JueYin Wind Tree(궐음 풍목), ZiWu(子午) is ShaoYin Monarch Fire(소음 군화), ChouWei(丑未) is TaiYin Humid Soil(태음 습토), YinShen(寅申) is ShaoYang Ministerial Fire(소양 상화), MaoYou(卯酉) is YangMing Dry Gold(양명 조금), and ChenXu(辰戌) is TaiYang Cold Water(태양 한수). Viscera combination(장부배합) combines Zi(子) and Bile(膽), Chou(丑) and Liver(肝), Yin(寅) and Lung(肺), Mao(卯) and Large intestine(大腸), Chen(辰) and Stomach(胃), Si(巳) and Spleen(脾), Wu(午) and Heart(心), Wei(未) and Small intestine(小腸), Shen(申) and Bladder(膀胱), You(酉) and Kidney(腎), Xu(戌) and Pericardium(心包), Hai(亥) and Tri-energizer(三焦), Which means that the function of the viscera and channels is the most active at that time. Twelve earthly branches mutual collisions collide with Zi(子) and Wu(午), Chou(丑) and Wei(未), Yin(寅) and Shen(申), Mao(卯) and You(酉), Chen(辰) and Xu(戌), and Si(巳) and Hai(亥). The two colliding earthly branches are on opposite sides, facing each other and restricting each other by the relation of Yin-Yin and Yang-Yang it rejects each other so a collision occurs. Six Correspondences(六合) coincide with Zi(子) and Chou(丑), Yin(寅) and Hai (亥), Mao(卯) and Xu(戌), Chen(辰) and You(酉) and Si(巳) and Shen(申) Wu(午) and Wei(未). Three combination(三合) is composed of ShenZiChen(申子辰), SiYouChou(巳酉丑), YinWuXu(寅午戌), and HaiMaoWei(亥卯未). Three combination(三合) is composed of ShenZiChen(申子辰), SiYouChou(巳酉丑), YinWuXu(寅午戌), and HaiMaoWei(亥卯未). This is because the time Six Qi(六氣) shifts in these three years are the same.

• New Physics: Sae Mulli
• /
• v.68 no.12
• /
• pp.1281-1287
• /
• 2018

In this study, $Al_xGa_{1-x}N$ films were grown on (0001) sapphire substrates by using metal-organic chemical vapor deposition (MOCVD). The crystallinity of the grown films was examined with X-ray diffraction (XRD) patterns. The surfaces and the chemical properties of the $Al_xGa_{1-x}N$ films were investigated using atomic force microscopy (AFM) and X-ray photoelectron spectroscopy (XPS), respectively. The optical properties of the $Al_xGa_{1-x}N$ film were studied in a wide photon energy range between 2.0 ~ 8.7 eV by using spectroscopic ellipsometry (SE) at room temperature. The data obtained by using SE were analyzed to find the critical points of the pseudodielectric function spectra, $<{\varepsilon}(E)>=<{\varepsilon}_1(E)>+i<{\varepsilon}_2(E)>$. In addition, the second derivative spectra, $d^2<{\varepsilon}(E)>/dE^2$, of the pseudodielectric function for the $Al_xGa_{1-x}N$ films were numerically calculated to determine the critical points (CPs), such as the $E_0$, $E_1$, and $E_2$ structure. For the four samples (x = 0.18, 0.21, 0.25, 0.29) between a composition of x = 0.18 and x = 0.29, changes in the critical points (blue-shifts) with increasing Al composition at 300 K for the $Al_xGa_{1-x}N$ film were observed via ellipsometric measurements for the first time.