• Journal of the Korean Ceramic Society
• /
• v.33 no.10
• /
• pp.1170-1176
• /
• 1996

Porous silicon was prepared by anodic reaction. The process was controlled by current density and etching time an the thickness change and the room temperature PL was measured. The thickness of porous silicon was increased with etching time and was decreased after critical time. It was the same as increasing current density. It needed only 15 sec to electropolish the surface of porous silicon above current density 70 mA/cm2. We can understand that increasing etching time leads narrow size of Si column by porous silicon formation mechanism. And the sample with narrow Si column revealed PL blue shift. The specimens were heated in the range of 300-1000$^{\circ}C$ in order to see PL changes. The heat treatment was proceeded in H2 atmosphere vacuum system to avoid oxidation. The PL was disappeared above 600$^{\circ}C$. In high temperature some sintered Si columns were observed in SEM photography. There was no difference of -Hx bonds which was suggested as evidence of hydride compounds luminescence between 500$^{\circ}C$ and 600$^{\circ}C$. Thus it is concluded that quantum confinement is major factor of PL of porous silicon.

• 한국신재생에너지학회:학술대회논문집
• /
• 2006.06a
• /
• pp.478-481
• /
• 2006

Energy is vital to global prosperity, yet dependence on fossil fuels as our primary energy source contributes to global climate change environmental degradation, and health problems. Hydrogen $(H_2)$ offers tremendous potential as a clean renewable energy currency. Hydrogen has the highest gravimetric energy density of any known fuel and is compatible with electrochemical and combustion processes for energy conversion without producing carbon-based emission that contribute to environmental pollution and climate change. Numerous methodologies have been developed for effective hydrogen production. Among them, the biological hydrogen production has gained attention, because hydrogen can be produced by cellular metabolismunder the presence of water and sunlight. The green alga Chlamydomonas reinhardtii is capable of sustained $H_2$ photoproduction when grown under sulfur deprived condition. Under sulfur deprived conditions, PSII and photosynthetic $O_2$ evolution are inactivated, resulting in shift from aerobic to anaerobic condition in the culture. After anaerobiosis, sulfur deprived algal cells induce a reversible hydrogenase and start to evolve $H_2$ gas in the light. According to above principle, we investigated the effect of induction parameters such as cell age, cell density. light intensity, and sulfate concentration under sulfur deprived condition We also developed continuous hydrogen production system by sulfate re-addition under sulfur deprived condition.

• Korean Institute of Interior Design Journal
• /
• v.19 no.4
• /
• pp.90-98
• /
• 2010

This study intends to understand the change of the library's bookshelves shape, composition and arrangement based on the social-culture in each period. For this purpose, this study analyzes the morphological shift of the library's bookshelves and knowledge information focused on the history of western libraries from the ancient libraries to the modern public libraries before the 20th century. And the results are follows. 1) We can make sure that the changes of the library's bookshelves are based on the environmental factors like social cultural political factors and also understand that the knowledge information are developed based on the function which is decided by the needs of the times and the serious necessities of users. With this reason, the morphology and the function of the library's bookshelves have been changed. 2) The characters and meanings of the library's bookshelves are changed with the times from movable type to fixed type, from closing type to opening type, from privileged use to public use, from religious contents to general scientific contents. 3) The morphology of the library's bookshelves are shifted from cylindrical box to Chest type Press type and Lectern system, Stall system, Wall system and advanced to Mixed(Stall+Wall) system. 4) The construction and arrangement methods of the library's bookshelves are determined by the convenience and efficiency of the installation for the perusal environments as well as the regarding to the social-cultural factors. The arrangement criteria are determined by the security topics in the earlier stage, after that determined by the lightening topics and nowadays the access topics to the information. These analysis results are very useful to research the technology of the library's bookshelves to be changed continuously and also to forecast the morphology of the library's bookshelves can be planned in the spaces of the future libraries.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.24 no.3
• /
• pp.279-284
• /
• 2016

Finite element analysis along with DOE scheme has been performed to obtain robust design of crankshaft assembly. This study focused on obtaining optimized fillet radius of crankshaft mainly by statistical approach. 27 design cases using 3 factors with 3 levels are constructed by design of experiment. Changes of design factors and noise factor may influence the durability of crankshaft system. General two stages of robust design may enhance the durability of crankshaft model. Increasing crank arm thickness was adopted as a shrink step and change of fillet radius was used as a shift step. By combining these two steps, the stress concentration at the fillet area is reduced and adequate fillet radius is determined for the robust design of crankshaft.

• Journal of Advanced Navigation Technology
• /
• v.15 no.6
• /
• pp.994-999
• /
• 2011

This paper explains how existing electrical ADU(Antenna Distribution Unit) has been improved into a mechanical ADU. Generally the mechanical ADU has stabilized Glide Path which provides a RF signal to the aircraft for safe landing and it has solved the issue of phase shift and power distribution ratio change which can be occurred during long-term use. Besides it has been certified by Flight check and operating several airports in oversea as well as in korea.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.11a
• /
• pp.251-252
• /
• 2006

A development of surface acoustic wave gas sensor to detecting volatile gas has been observed by monitoring output signal as function of time onto the network analyzer. The SAW sensor with a center frequency of 200MHz was fabricated on $42^{\circ}$ S-T Quartz substrates. Using the gas chromatography column has been selectivity. Experimental results, which show the phase change of output signal under the absorption of volatile gas onto sensors, were presented. The proposed sensor has the properties of high sensitivity compare to the conventional SAW gas sensor and chemical selectivity. Thus, it is thought these results are applicable for use in sensor array of an high performance electronic nose system.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2006.08a
• /
• pp.1086-1089
• /
• 2006

We have developed 2.4" QVGA wide color gamut LCD module using RGB-LED backlight. The color gamut is achieved 100% of NTSC compared to 70% of NTSC when used with White-LED backlight. But RGB LED backlight is difficult to maintain its color balance since RGB LED is gradually degraded by the change of ambient temperature and a long term aging characteristic, etc. This paper describes a feasibility study of our optical feedback system developed for preventing such a color shift.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.9 no.3
• /
• pp.510-515
• /
• 2005

Doppler spread can occur due to the relative movement of transmitter and receiver. The Doppler frequency shift varies as the relative location and the velocity of transceivers change. This Doppler spread may seriously degrade the performance of OFDM system which is considered to be very efficient for multimedia wireless communication. Therefore, applying the method of receiver diversity, we analyze the degree of BER improvement in Doppler spread environments to investigate the effectiveness of the chosen methods according to various wireless channels.

• ETRI Journal
• /
• v.6 no.4
• /
• pp.9-20
• /
• 1984

Communications is becoming a vital sector to lead Information Society in the nearfuture. In that sense the price system of its services is now being discussed seriously among the people who are directly and indirectly related to communications development. Input-Output analysis model developed by W. Leontief in early 1930's is a very useful tool to measure the price linkage effects in the national economy, which would be induced from the shift of a certain sector's price. 1980's I-0 table with 19 sectors is rear-ranged and applied to price analysis model, in which communications is treated as a exogenous sector, to see the price impacts generated from a change of telephone rate. With the results of this study, the authorities concerned with price policy can make their decisions more reasonable.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.8 no.2
• /
• pp.92-101
• /
• 2000

The objective of this paper is to design the controller for longitudinal vehicle following which makes the vehicle follow the lead vehicle and keeps a safety distance without human driver operation. This paper presents a sliding mode control algorithm for the ACC system. The controller is based on three sliding surfaces. Each surface plays an individual control-deviation control, throttle control and brake control. In addition to sliding mode control, we propose some additional schemes to enhance controller performance. The first one is a gear shift-down controller which makes tractive force increase with a change of gear ratio. The other is a predictive correction method which reduces slinky effect.