• Steel and Composite Structures
• /
• 제7권3호
• /
• pp.253-262
• /
• 2007

A methodology to design symmetrically laminated fibre-reinforced structures under transverse loads for minimum weight, with manufacturing uncertainty in the ply angle, is described. The ply angle and the ply thickness are the design variables, and the Tsai-Wu failure criteria is the design constraint implemented. It is assumed that the probability of any tolerance value occurring within the tolerance band, compared with any other, is equal, and thus the approach is a worst-case scenario approach. The finite element method, based on Mindlin plate and shell theory, is implemented, and thus effects like bending-twisting coupling are accounted for. The Golden Section method is used as the search algorithm, but the methodology is flexible enough to allow any appropriate finite element formulation, search algorithm and failure criterion to be substituted. In order to demonstrate the procedure, laminated plates with varying aspect ratios and boundary conditions are optimally designed and compared.

• 설비공학논문집
• /
• 제12권7호
• /
• pp.649-658
• /
• 2000

Thermodynamic modeling of low-pressure scroll compressor was developed by combining continuity and energy conservation equation. Suction gas heating was considered using energy balance inside the low pressure shell. Pressure, temperature and mass of refrigerant-22 as a function of orbiting angle were calculated by solving the governing equations using fourth order Rung-Kutta scheme. Motor efficiency was taken by experiments with a variation of frequency. The developed model was applied to the analysis of an inverter driven scroll compressor with a variation of frequency, pressure ratio and operating conditions. The model was verified with the experimental results at the same operating conditions. The developed model was adequate to predict performance of the inverter driven scroll compressor as a function of operating conditions. Calculated parameters from the model were discharge temperature, mass flow rate, power input, COP, and thermodynamic properties with respect to orbiting angle. To enhance the performance of a scroll compressor, it is essential to diminish leakage at low frequency level and improve the mechanical efficiency at high frequency level.

• 연구논문집
• /
• 통권26호
• /
• pp.15-24
• /
• 1996

In this study, we performed the static analysis of a cord-reinforced rubber airspring and generated the three-dimensional half-symmetry model which use the finite-strain shell elements to model the airbag. the three-dimensional hydrostatic fluid elements to model the air-filled cavity, and the rebar elements to model the multi-ply nylon reinforcement of airbag. In addition, a three-dimensional rigid surface is used to define the contact between the airspring and metal bead. The air inside the airspring cavity has been modeled as a compressible fluid satisfying the ideal gas law. The conclusions of this study are as follows. 1) In the pressurization step of analysis, we could predict the change of vertical reaction force, cavity volume and pressure within the airspring. 2) In the second step of analyzing vertical static stiffness, the increase of the vertical load increases the vertical stiffness. 3) In case of changing the angle of nylon cord, the increase the angle of nylon cord increases the vertical stiffness.

• 천문학회보
• /
• 제45권1호
• /
• pp.50.4-51
• /
• 2020

We report our discovery of Raman-scattered He II λ6545 feature in young planetary nebulae NGC 6886 and NGC 6881 which indicates the existence of atomic hydrogen components. Considering sharply increasing cross-section of hydrogen atom near the resonance, Raman-scattered He II features are a useful diagnostic tool to investigate the distribution and kinematics of H I region in planetary nebulae. The high-resolution spectroscopic observation was carried out using BOES installed on the 1.8 m telescope of BOAO. We estimate the column density of H I region and its expansion velocity using our grid-based Monte-Carlo radiative transfer code. We assume that the H I region is uniformly distributed in spherical shell geometry with an opening angle and expands with constant speed. Our best-fit model is shown with the column density NHI = 3 × 1020 cm-2 and expansion speed vexp = 25 km s-1 with the opening angle ~ 25° for NGC 6886, and NHI = 4 × 1020 cm-2 and vexp = 30 km s-1 with the opening angle ~ 35° for NGC 6881. We present brief discussions on the late-stage of evolution of stars with mass > 3 M⊙.

• 한국자기학회지
• /
• 제27권4호
• /
• pp.135-139
• /
• 2017

직경 $190{\mu}m$ Cu 와이어에 $Ni_{80}Fe_{20}$ 연자성 물질을 전기도금법으로 증착하여 금속 코어/연자성 쉘 구조의 복합 와이어를 제작하고 이 와이어에서 자기임피던스 효과(MI 효과)를 연구하였다. 원통 좌표계에서 복합 와이어의 임피던스 텐서의 두 대각 성분 $Z_{{\theta}{\theta}}$와 $Z_{zz}$는 z 방향으로 가한 자기장에 대해 큰 MI 효과를 나타낸 반면, 비대각 임피던스 $Z_{{\theta}z}$의 MI 효과는 매우 약하게 나타났다. 비대각 자기임피던스 효과가 큰 복합 와이어를 만들기 위해 비틀림 스트레인 하에서 전기도금하는 방법을 시도하였다. Cu 와이어의 한쪽 끝을 약 $270^{\circ}$ 이상 회전한 상태에서 전기도금 된 복합 와이어는 뚜렷하게 증대된 비대각 MI 효과를 보였으며 $360^{\circ}$ 회전한 상태에서 도금 된 와이어에서 최대의 비대각 MI 효과를 얻을 수 있었다. 본 연구를 통해 비대각 MI 효과가 큰 복합와이어를 제작하는 방법을 개발한 것은 금속 코어/자성 쉘 복합 와이어의 자기센서 소재로써의 응용가능성을 높일 것으로 기대된다.

• 한국의류학회지
• /
• 제40권1호
• /
• pp.97-113
• /
• 2016

This study develops pant patterns using body shape, measurement and shell mesh data to decide optimal women's pants according to styles with excellent size, fit and shape for different individuals and silhouettes. Standard landmarks, lines, triangles and structures were set on a 3D scanned lower body shell to represent women in their twenties and flattened as a 2D pattern. Patterns were created and analyzed according to culotte, formal, slacks and tight type considering crotch shape, location of the crotch point, and adjusting waist darts. Flattened patterns were rotated to compare existing methods. The crease lines were then set through the hip protrusion point and compared. The main factor of the pant pattern were extracted, total rise, crotch depth, crotch width, angle of center line, shape of the center line curve, the thigh width, the amount of waist dart, and crease line position. With going tight style from the culotte, the fits are closer to the figure with minimized thigh circumference, the dart amount decreases, the crotch depth increases, the crotch extensions were shorter, and the angle of the center back increased. The total rise is U shape for culotte and is closer to V shape as the silhouette tightens. T-test of appearance evaluation of the developed pant pattern were conducted after analyzing measurements and shapes of each styles. The results of the developed patterns were superior to existing patterns in accordance to hip line between body and pants as well as appearance evaluation. We found systematic mechanisms among pattern factors that create various pant silhouettes. Evidence on classification of the silhouettes of traditional types of pants were explained objectively through the process of playing out 3D forms.

• 청정기술
• /
• 제25권2호
• /
• pp.161-167
• /
• 2019

바이오매스의 급속열분해를 위하여 지난 수십 년간 다양한 형태의 반응기가 개발되었다. 급속열분해 공정의 반응기는 유동층 반응기가 많이 사용되어 왔으며, 최근에는 분사층 반응기를 이용한 바이오매스의 급속열분해 특성에 대한 연구가 다수의 연구자들에 의해 수행되고 있다. 분사층 반응기의 유동화 특성은 입자의 물리적 특성, 유체 제트의 속도, core와 annulus의 구조에 영향을 받으며, 반응기의 기하학적 구조는 분사층 내부의 core와 annulus 구조를 결정하는 주요 인자이다. 따라서 분사층 반응기의 최적설계를 위해서는 열분해 반응에 영향을 주는 인자에 대한 바이오매스의 급속열분해 특성에 대한 연구가 수행되어야 한다. 하지만 분사층 반응기의 기하학적 구조에 의한 바이오매스의 급속열분해 특성은 자세히 연구되지 않았다. 본 연구에서는 분사층 반응기의 원뿔각과 반응 온도 변화에 따른 Jatropha curcas L. seed shell cake의 급속열분해 실험을 수행하여 분사층 반응기의 최적 형상과 반응 온도를 도출하였다. 실험결과, 열분해 오일의 에너지 수율은 반응 온도 $450^{\circ}C$, 분사층 반응기의 원뿔각 $44^{\circ}$에서 63.9%로 가장 높게 나타났다. 그리고 분사층 반응기 내 고체입자의 열전달과 기체상 열분해 생성물의 체류시간은 원뿔각의 영향을 받아 열분해 생성물의 수율 및 열분해 오일의 품질에 영향을 주는 것으로 나타났다.

• 한국해양공학회지
• /
• 제34권3호
• /
• pp.155-166
• /
• 2020

Ductile fracture prediction is critical for the reasonable damage extent assessment of ships and offshore structures subjected to accidental loads, such as ship collisions and groundings. A fracture model combining the Hosford-Coulomb ductile fracture model with the domain of solid-to-shell equivalence model (HC-SDDE), was used in fracture simulations based on shell elements for the punching fracture experiments of unstiffened and stiffened panels. The flow stress and ductile fracture characteristics of JIS G3131 SPHC steel were identified through tension tests for flat bar, notched tension bar, central hole tension bar, plane strain tension bar, and pure shear bar specimens. Punching fracture tests for unstiffened and stiffened panels are conducted to validate the presented HC-DSSE model. The calibrated fracture model is implemented in a user-defined material subroutine. The force-indentation curves and final damage extents obtained from the simulations are compared with experimental results. The HC-DSSE fracture model provides reasonable estimations in terms of force-indentation paths and residual damage extents.

• 복합신소재구조학회 논문집
• /
• 제1권1호
• /
• pp.1-8
• /
• 2010

The dynamic instability analysis of delaminated composite structures subjected to in-plane pulsating forces is carried out based on the higher order shell theory of Sanders. In the finite element (FE) formulation, the seven degrees of freedom per each node are used with transformations in order to fit the displacement continuity conditions at the delamination region. The boundaries of the instability regions are determined using the method proposed by Bolotin. The numerical results obtained for skew plates and shells are in good agreement with those reported by other investigators. The new results for delaminated skew plate and shell structures in this study mainly show the effect of the interactions between the radius-length ratio and other various parameters, for example, skew angles, delamination size, the fiber angle of layer and location of delamination in the layer direction. The effect of the magnitude of the periodic in-plane load on the instability regions is also investigated.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2011년도 제37회 추계학술대회논문집
• /
• pp.307-311
• /
• 2011

이 논문은 필라멘트 와인딩 공법으로 제작된 cone형 복합재 lattice 구조물에 대한 연구이다. cone형 복합재 lattice 구조물은 helical rib과 hoop rib 구조로 이루어져 있다. 이 구조는 탄소 섬유를 에폭시수지에 함침 시켜 섬유의 끊어짐이 없이 연속적으로 실리콘 고무 금형의 홈 안에 필라멘트 와인딩 하여 제작한 것이다. 본 연구에서 cone형 복합재 lattice 구조물에 대한 설계 개념과 제작방법에 대해 기술하였다.