• Asian-Australasian Journal of Animal Sciences
• /
• 제33권5호
• /
• pp.848-855
• /
• 2020

Objective: Shearing is one of the practices that is applied periodically to fiber producing animals, which can also alter resistance of animals to high temperatures in especially summer months. This study aimed to investigate effects of shearing on some physiological and hormonal parameters in Akkaraman sheep during summer season. Methods: This study was carried out on 39 non-pregnant Akkaraman ewes (aged 1.5 years at the beginning of experiment). The 39 ewes were chosen randomly from the flock belonging to the Erciyes University and they were assigned to two groups as follows: i) group A (n = 20) designed as the control group, they were shorn and group B (n = 19) designed as the experimental group, they were unshorn. Prior to the shearing (-1 day) and on days 1, 7, 15, 30, 45, 60, 75, and 90 following the shearing, blood samples were taken from the vena jugularis of each sheep. Cortisol, β-endorphin, growth hormone (GH), thyroxine (T₄), triiodothyronine (T₃), and heat shock protein 70 (HSP-70) concentrations were determined using the enzyme immunoassay method. Body weight (BW), rectal temperature (RT), pulse rate (PR), and respiratory rate (RR) of each sheep were recorded at the same time. The data obtained were analyzed using two-way repeated measures analysis of variance. Results: Statistical analysis showed a significant effect of shearing×period interaction (p<0.01) and a significant effect of period (p<0.01) on BW, HSP-70, cortisol, T₄ and RT, PR, GH, β-endorphin, T₃, respectively. Also these analysis showed no significant effect of shearing×period interaction or period on RR. Conclusion: The results showed that the thermoregulation abilities of sheep were affected by shearing treatment and the shorn ewes were less affected by heat stress. In conclusion, based on the data of this study, shearing can be considered as a necessary management practice that requires protection for sheep from the effect of heat stress.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 추계학술대회 논문집
• /
• pp.494-497
• /
• 2000

This paper presents the fine-shearing experimental investigation using brass sheets. Shearing including blanking, trimming, piercing, etc is one of the most frequently used processes in sheet metal manufacturing. In this study, an individual set of tooling was designed and fabricated to carry out experiment for shearing process. In order to investigate the effect of shearing surface correspond to die clearance, the profile of shearing surface was examined by using microscope. Futhermore, the relationship between shearing force and the profile of shearing surface was considered.

• 한국안전학회지
• /
• 제14권4호
• /
• pp.53-59
• /
• 1999

Recently, Tailor Welded Blank (TWB) is widely used in automotive industry since the transformation characteristic of its material can be changed. However, clearance between welding surfaces becomes the important factor which affect the quality of the laser weld, causing difficulties in preparing the sheet. The objective of this paper is to systematically evaluate the effects of previously presented fracture criterion and shearing condition on precise mechanical shearing simulation result. For this purpose, a parametric study was peformed to investigate the effect of finite element size and fracture criterion on simulation result. Also, in order to predict the optimum shearing condition, effect of shearing conditions such as clearance and punch radius on the shear plane shape was evaluated.

• 한국환경복원기술학회지
• /
• 제20권2호
• /
• pp.79-91
• /
• 2017

This study was conducted to find out the physical properties and soil shearing strength reinforcement effect of herbaceous plants for the slope revegetation works. Two native plants(Pennisetum alopecuroides and Miscanthus sinensis) were used for this experiment, because they have excellent seed germination rates without preconditioning, and grow naturally around rivers. To identify the physical properties, the partial dry weight of plants were investigated. To identify the soil shearing strength reinforcement effect, the respective soil shearing strengths of the control soils, Pennisetum alopecuroides, Miscanthus sinensis samples were measured. Also, we did a correlation analysis to examine the relation of shearing strength to plant features. The results are summarized as follows: 1. The average dry weight of Pennisetum alopecuroides samples consists of 52.36% above ground and 47.64% at root. And in dry weight, 78.24% of it's root distributes within 10 cm in soil depth. Meanwhile the average dry weight of Miscanthus sinensis samples consists of 52.91% above ground and 47.09% at root. And in dry weight, 82.95% of it's root distributes within 10 cm in soil depth. 2. The results of correlation analysis showed that for both Pennisetum alopecuroides and Miscanthus sinensis, it could not be said that there was any correlation between shearing strength and plant characteristics, and statistically they were not meaningful. 3. In the shearing strength test with control soils, Pennisetum alopecuroides, Miscanthus sinensis as subjects, the differences in shearing strength measurement results were modest, and the order was shown as control soils < Pennisetum alopecuroides < Miscanthus sinensis, so the soil shearing strength reinforcement effect by the Pennisetum alopecuroides and the Miscanthus sinensis on loamy sand at river banks surface was confirmed.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2000년도 춘계학술대회논문집 - 한국공작기계학회
• /
• pp.573-578
• /
• 2000

Recently, Tailor Welded Blanks(TWB) is widely used in automotive industry since the transformation characteristics of its material can be changed. However, clearance between welding surface becomes the important factor which affect the quality of the laser weld, causing difficulties in preparing the sheet. The objective of this paper is to systematically evaluate the effects of previously presented fracture criterion and shearing condition on precise mechanical shearing simulation result. Also predict the optimum shearing condition, effect of shearing condition such as clearance and punch radius on the shear plane shape was evaluated.

• 한국정밀공학회지
• /
• 제19권9호
• /
• pp.166-171
• /
• 2002

The objective of this paper is to investigate the effect of clearance and the configuration of die system on burr formation by FEM analysis and experimental tests. Compared with casting, forging and machining, shearing has been known, especially in heavy or mass-production industries, as a very economical and fast way to obtain the desired shape Recently, the shearing process becomes widely used in the small and light electronic component manufacturing industries. When shearing a part of sheet metal, the burr formed on the cutting edge is usually unavoidable. The burr would not only degrade the precision of products but also causes additional cost for the deburring process. In this paper, the influence of shearing parameters such as clearance and configurations of the lower pad (ejector) on burr formation is investigated by using the experimental and numerical approach. From the experimental results, it has been shown that the more narrow clearance gives the smaller burr height and the higher shearing forces. The removal of lower holder also makes the sheared surface integrity and the dimensional accuracy become worse. The FEM results (using DEFORM-2D) show good agreement with the experimental results.

• 산업기술연구
• /
• 제25권B호
• /
• pp.121-126
• /
• 2005

Micro wires manufactured by the straightening process are used in the BT(Bio-Technology), IT(Information-Technology), NT(Nano-Technology). We have developed a novel wire straightener which uses the direct heating method(DHM) for straightening the micro wire and shearing device for burr-less cutting. In this study, we confirm the tendency of micro wire after the shearing process. It is impossible to remove the burr in the shearing process. However, the embodiment of minimum burr size after the shearing process is the best in-process method. In order to minimize the burr size, we have accomplished the various experiment condition such as the U-groove, the effect of the counter punch, the shear angle, clearance.

• Asian-Australasian Journal of Animal Sciences
• /
• 제26권10호
• /
• pp.1466-1473
• /
• 2013

This experiment was conducted to study the variation laws and correlations of shearing force and feed characteristics including morphological characteristic, chemical composition and in situ degradability of wheat straw. Feasibility of evaluating the nutritional value of wheat straws with shearing force values was analyzed in this study. Six hundred wheat straw plants (Jimai 22) were randomly selected and placed in a cool and ventilated place. Samples were collected in the 1st, 15th, 30th, 45th, 60th d after harvest to measure shearing force, morphological characteristic, nutritional composition. Rumen degradation of dry matter (DM), neutral detergent fiber (NDF) and acid detergent fiber (ADF) of wheat straws were determined by the nylon bags method. The results demonstrated that linear and quadratic effects of storage time on all the tested morphological characteristics were significantly correlative (p<0.01). As storage time goes on, all the tested nutrients and their rumen degradations of wheat straw was linearly (p<0.01) and quadratic (p<0.01) correlative except ADF content and rumen degradation of ADF. Significant correlations were determined in linear effect of shearing force on morphological characteristics (p<0.01), and linear density and diameter were a more sensitive predictor than stem thickness for shearing force. There were strong correlations between storage time and all the measured physical characteristics (shearing force, morphological characteristics and shearing force standardized by morphological characteristics) (p<0.01). Nutrition compositions were linearly correlative with shearing force and standardized shearing force (p<0.01). The linear correlation between rumen degradation of DM and NDF and shearing force and standardized shearing force were evident (p<0.01). In conclusion, shearing force, nutrition compositions and their rumen degradation of wheat straw were still dynamic with storage time after harvest. Correlation could be found between shearing force and nutritional characteristics of wheat straw. Nutrient content, morphological index and rumen degradation of DM and NDF could be predicted by changes in shearing force. Shearing force should be applied according to a standardized storage time when it is used to forecast the feed value of wheat straws.

• 한국주조공학회지
• /
• 제31권6호
• /
• pp.354-361
• /
• 2011

The liquid metal shearing device was constructed and assembled with a commercial high-pressure die-caster in order to induce intensive turbulent shearing force on molten aluminum alloys. The effect of the liquid metal shearing on the microstructure and tensile properties of A356 alloys was investigated with the variation of iron content. The experimental results show that dendritic primary ${\alpha}$-Al phase was effectively modified into a equiaxed form by the liquid metal shearing. It was also found that the needle-like ${\beta}$-AlFeSi phase in a Fe containing A356 alloy was changed into a blocky shape resulting in the improved mechanical properties. Based on the mechanical properties, it was suggested that the iron content in A356 alloy could be more widely tolerated by utilizing the liquid metal shearing HPDC process.

• 대한가정학회지
• /
• 제27권1호
• /
• pp.1-8
• /
• 1989

In order to investigate the mechanical properties such as tensile, bending, shearing, thickness and weight of the wool fabrics were measured by KES-F system. Samples were classified into blend ratio, weave type, fabric count. Blend ratio was classified into two groups, which are P/W blended fabric (p=63~65%, w=35~37%) and all wool fabric. Weave type was classified into four groups, which are plain, 3 harness twill, 4harness twill, satin. Cloth count was classified into three groups, which are loose, medium, tight. Statistical analysis was performed using T-test, F-test. The results were as follows; 1. There was significant difference in the thickness, tensile, bending, shearing according to the blend ratio. 2. According the weave, there was significant difference in the bending, weight and thickness in the P/W blended fabrics. There was significant difference in the tensile, weight, thickness, bending, shearing, shearing hysterisis (2HG) in the all wool fabrics. 3. There was significant difference in the shearing properties according to the fabric count.