• 한국산학기술학회논문지
• /
• 제14권11호
• /
• pp.5745-5751
• /
• 2013

본 논문은 monomer에서 결합증진에 많은 역할을 하는 MMA와 TEGDMA의 농도별 표면 처리와 silane coupling agent로 표면 처리한 것이 의치상 레진과 이장재간의 결합력에 미치는 영향에 대해 알아보고자 하였다. 의치상 레진에 MMA와 TEGDMA의 농도별 표면 처리와 silane coupling agent로 표면처리 후 이장재를 주입하여 전단결합강도를 측정하였다. MMA와 TEGDMA의 농도별 표면 처리에 따른 의치상 레진과 이장재간의 전단결합강도에서는 Vertex self curing resin에서 95%, 90%, 80%, Kooliner에서는 95%, 90%에서 유의적으로 높게 나타났다(P<0.05). 또한, silane coupling agent 5%로 표면 처리한 그룹이 Vertex self curing resin과 Kooliner 모두에서 전단결합강도가 유의적으로 높게 나타났다(P<0.05). 따라서 적절한 화학적 표면 처리는 의치상 레진과 이장재간의 결합력 증가에 영향을 미치리라 사료된다.

• Steel and Composite Structures
• /
• 제33권1호
• /
• pp.19-36
• /
• 2019

Cyclic behaviour of composite (steel-concrete) plate shear walls (CPSW) with variable column flexural stiffness is experimentally and numerically investigated. The investigation included design, fabrication and testing of three pairs of one-bay one-storey CPSW specimens. The reference specimen pair was designed in way that its column flexural stiffness corresponds to the value required by the design codes, while within the other two specimen pairs column flexural stiffness was reduced by 18% and 36%, respectively. Specimens were subjected to quasi-static cyclic tests. Obtained results indicate that column flexural stiffness reduction in CPSW does not have negative impact on the overall behaviour allowing for satisfactory performance for up to 4% storey drift ratio while also enabling inelastic buckling of the infill steel plate. Additionally, in comparison to similar steel plate shear wall (SPSW) specimens, column "pull-in" deformations are less pronounced within CPSW specimens. Therefore, the results indicate that prescribed minimal column flexural stiffness value used for CPSW might be conservative, and can additionally be reduced when compared to the prescribed value for SPSWs. Furthermore, finite element (FE) pushover simulations were conducted using shell and solid elements. Such FE models can adequately simulate cyclic behaviour of CPSW and as such could be further used for numerical parametric analyses. It is necessary to mention that the implemented pushover FE models were not able to adequately reproduce column "pull-in" deformation and that further development of FE simulations is required where cyclic loading of the shear walls needs to be simulated.

• 한국공간구조학회논문집
• /
• 제19권2호
• /
• pp.91-99
• /
• 2019

The push-out tests have been conducted on the specimens which consist of the steel beam with U-shape section and the continuous cap-type shear connector. Existing formulas for the elevation of shear connector capacity were investigated on the basis of test results. The shear capacities of continuous cap-type shear connectors distinctly declined as the diameters of side-hole in the shear connector increased. The rebars through side-hole for the transverse reinforcement improved the shear capacity of continuous cap-type connector by 20 to 30 percent. It was not feasible to obtain the appropriate capacity values of continuous cap-type shear connectors made of thin steel plate like those of in this study, using the existing formulas. The new formula for reflecting the shear strength of penetrative bars was proposed based on the shear equation of Eurocode 4. The slip capacities of continuous cap-type shear connectors were shown to exceed the limit value of 6mm for the sufficiently ductile behavior.

• 한국구조물진단유지관리공학회 논문집
• /
• 제21권2호
• /
• pp.60-68
• /
• 2017

본 연구에서는 지내력이 기초판에 미치는 영향을 충분히 고려할 수 있도록 현장여건과 동일한 옥외의 지반에서 실험할 수 있는 시스템을 구축하였으며, 대상 실험체는 경제성 및 시공성 향상을 위하여 강판을 "ㄷ"자형으로 절곡하여 단면 2차모멘트를 극대화 하고 현장조립이 가능하도록 제안 하였다. 대상 실험체는 무보강 실험체 1개, 강판 두께를 동일하게 하여 보강 길이를 달리한 실험체 3개, 강판 두께를 달리하고 위험단면 부근에 스티프너 보강한 실험체 2개 총 6개의 실험체를 대상으로 비교 검토 한다. 실험 결과 스티프너 보강에 의한 효과는 없는 것으로 나타났으며, 전단보강재의 보강길이는 확장된 위험단면에서 전단력을 지내력으로 나타낸 값과 위험단면에서 보강재가 받을 수 있는 전단내력을 지내력으로 환산여하여 두 선의 교차점을 유효보강 길이로 산정하는 강판두께별 유효보강길이 산정방법을 제안하였다.

• Geomechanics and Engineering
• /
• 제14권4호
• /
• pp.387-398
• /
• 2018

The present study evaluates the interface shear strength between sand and different construction materials, namely steel and concrete, using direct shear test apparatus. The influence of surface roughness, mean size of sand particles, relative density of sand and size of the direct shear box on the interface shear behavior of sand with steel and concrete has been investigated. Test results show that the surface roughness of the construction materials significantly influences the interface shear strength. The peak and residual interface friction angles increase rapidly up to a particular value of surface roughness (critical surface roughness), beyond which the effect becomes negligible. At critical surface roughness, the peak and residual friction angles of the interfaces are 85-92% of the peak and residual internal friction angles of the sand. The particle size of sand (for morphologically identical sands) significantly influences the value of critical surface roughness. For the different roughness considered in the present study, both the peak and residual interaction coefficients lie in the range of 0.3-1. Moreover, the peak and residual interaction coefficients for all the interfaces considered are nearly identical, irrespective of the size of the direct shear box. The constitutive modeling of different interfaces followed the experimental investigation and it successfully predicted the pre-peak, peak and post peak interface shear response with reasonable accuracy. Moreover, the predicted stress-displacement relationship of different interfaces is in good agreement with the experimental results. The findings of the present study may also be applicable to other non-yielding interfaces having a similar range of roughness and sand properties.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2000년도 가을 학술발표회 논문집
• /
• pp.377-384
• /
• 2000

The characteristics and prediction model of the shear strength for unsaturated residual soils was studied. In order to investigate the influence of the initial water content on the shear strength, unsaturated triaxial tests were carried out varying the initial water content, and the applicability of existing prediction models for the unsaturated shear strength was testified. It was shown that the soil - water characteristic curve and the shear strength of the unsaturated soil varied with the change of the initial water content. A sample compacted in the lower initial water content needs a higher suction to get the same degree of saturation while the shear strength of a sample with the lower initial water content displays a lower value. In order to apply the existing prediction models of the unsaturated shear strength to granite residual soils, a correction coefficient, α, on the internal friction angle, ø'was added.

• 한국방사선학회논문지
• /
• 제15권6호
• /
• pp.883-889
• /
• 2021

본 연구는 2020년 5월부터 2020년 12월까지 복부초음파 검사를 위해 내원한 101명의 환자를 대상으로 하였다. 횡파탄성측정검사법을 이용하여 초음파 검사 시 초음파 영상(에코 패턴, 비장비대, 간염) 소견에 따른 탄성도를 알아 알아보고자 하였다. 에코 패턴의 정상 그룹의 횡파탄성측정값은 5.75±1.58 kPa였으며, 에코 패턴의 비정상 그룹은 8.84±4.94 kPa로 에코 패턴 비정상 그룹에서 횡파탄성측정값이 높게 나타났다(p<0.05). 정상 비장 크기에서 간 탄성도 값은 6.33±2.54 kPa였으며, 비장비대의 간 탄성도 값은 13.73±5.48 kPa로 나타났다. 비장비대일 경우 간 탄성도 값이 높게 나타났으며, 통계적으로 유의미한 차이가 있었다(p<0.05). 비장 크기가 증가할수록 간 탄성도 값이 1.485배, 간염이 진행될수록 간 탄성도 값이 1.573배 증가하는 것으로 나타났다(p<0.05). 초음파 영상 소견과 횡파탄성측정법 간 일치도 분석 결과 Kappa 값이 0.922(p<0.05)로 높게 나타났으며, 두 검사 방법 간에 높은 일치도를 보였다. 간 초음파 소견과 함께 횡파탄성측정법 검사의 간 탄성도 값을 추가적으로 비교한다면 간 섬유화 진단에 있어 많은 도움이 될 것으로 생각된다.

• 자원환경지질
• /
• 제50권2호
• /
• pp.145-157
• /
• 2017

최근 집중강우로 인하여 전국적으로 산사태 및 사면붕괴 현상이 빈번히 발생하고 있다. 이러한 산지 및 비탈면에서 발생하는 자연재해에 대한 대책안 마련 및 설계 입력자료로서 지반의 강도정수(전단강도)를 도출해야만 한다. 그러나 현재 산지 및 비탈면에 접근하여 지반조사를 하기 위해서는 과다한 산림훼손과 많은 경제적인 비용 등이 요구되어진다. 따라서 본 연구에서는 현장에서 인력운반이 가능한 경량화된 소형동적콘관입시험기를 제작하여 다수의 지역에 대한 지반의 특성 및 강도정수를 산출하였다. 그리고 국내 및 외국의 소형동적콘관입시험 방법에 대해서 연구 분석하여 국내에 적합한 콘 재료와 시험방법을 제안하였으며, 대표적인 지역을 대상으로 현장에서 콘관입시험 Nc값과 표준관입시험 N값과 비교 분석하였다. 이와 더불어 직접전단시험 및 공내전단시험을 실시하여 토층심도별, 기반암별, 흙의 분류별 그리고 #200번체 통과량별로 Nc값과 전단강도와의 상관관계를 분석하였다. 특히 본 연구에서는 산지조건에서 가장 많이 분포하는 사질토를 대상으로 Nc값에 대응하는 전단강도(점착력 및 내부마찰각)와의 상관식을 제안하여 산지 토층에 대한 효율적인 지반강도정수를 산출하도록 하였다.

• 한국공간구조학회논문집
• /
• 제18권2호
• /
• pp.121-128
• /
• 2018

The push-out tests have been conducted on the specimens which consist of the steel beam with U-shape section and the cap-type shear connectors with constant intervals. Existing equations for the evaluation of shear connector strength have been investigated on the basis of test results. The reinforcing bars for longitudinal reinforcement and the penetrative bars for transverse reinforcement didn't have much effect on the shear capacity of the cap-type shear connector. The larger the width of cap-type shear connector was profiled, the greater the shear strength turned. The shear capacities of cap-type shear connectors with constant intervals were evaluated on the basis of push-out test results, and those were possible to be determined with proper safety margin using the Eurocode 4. The slip capacity of cap-type shear connector was shown to exceed the limit value of 6mm for sufficiently ductile behavior.

• Geomechanics and Engineering
• /
• 제13권5호
• /
• pp.809-823
• /
• 2017

This paper describes lab test results of artificial rock-like material samples having a plane joint. Cyclic shear tests were performed under different normal loads and different shear displacement amplitudes. For this purpose, multi-stage normal loading tests (30 kN, 60 kN, 90 kN, 180 kN, 360 kN and 480 kN) with cyclic excitation at frequency of 1.0 Hz and different shear displacement amplitudes (0.5 mm, 1.0 mm, 2.0 mm, 4.0 mm, 5.0 mm, and 8.0 mm) were conducted using the big shear box device GS-1000. Experimental results show, that shear forces increase with the increase of normal forces and quasi-static friction coefficient is larger than dynamic one. With the increase of normal loads, approaching the peak value of shear forces needs larger shear displacements. During each cycle the normal displacements increase and decrease (rotational behavior in every cycle). Peak angle of inclination increases with the increase of normal load. A phase shift between maximum shear displacement and maximum shear force is observed. The corresponding time shift decreases with increasing normal load and increases with increasing shear displacement amplitudes.