• Steel and Composite Structures
• /
• 제20권6호
• /
• pp.1369-1389
• /
• 2016

This paper investigates the flexural stiffness of simply supported steel-concrete composite I-beams under positive bending moment through combined experimental, numerical, and different standard methods. 14 composite beams are tested for experimental study and parameters including shear connection degree, transverse and longitudinal reinforcement ratios, loading way are also investigated. ABAQUS is employed to establish finite element (FE) models to simulate the flexural behavior of composite beams. The influences of a few key parameters, such as the shear connection degree, stud arrangement, stud diameter, beam length, loading way, on the flexural stiffness is also studied by parametric study. In addition, three widely used standard methods including GB, AISC, and British standards are used to estimate the flexural stiffness of the composite beams. The results are compared with the experimental and numerical results. The findings have provided comprehensive understanding of the flexural stiffness and the modelling of the composite beams. The results also indicate that GB 50017-2003 could provide better results in comparison to the other standards.

• Structural Engineering and Mechanics
• /
• 제77권4호
• /
• pp.559-569
• /
• 2021

This study was conducted to investigate the residual bearing capacity of steel-concrete composite beams under high-cycle fatigue loading through experiments and theoretical analysis. Six test beams with stud connectors were designed and fabricated for static, complete fatigue, and partial fatigue tests. The failure modes and the degradation of several mechanical performance indicators of the composite beams under high-cycle fatigue loading were analyzed. A calculation method for the residual bearing capacity of the composite beams after certain quantities of cyclic loading cycles was established by introducing nonlinear fatigue damage models for concrete, steel beam, and shear connectors beginning with the material residual strength attenuation process. The results show that the failure mode of the composite beams under the given fatigue load appears to be primarily affected by the number of cycles. As the number of fatigue loadings increases, the failure mode transforms from mid-span concrete crushing to stud cutting. The bearing capacity of a 3.0-m span composite beam after two million fatigue cycles is degraded by 30.7% due to premature failure of the stud. The calculated values of the residual bearing capacity method of the composite beam established in this paper agree well with the test values, which indicates that the model is feasibly applicable.

• 한국강구조학회 논문집
• /
• 제24권1호
• /
• pp.73-80
• /
• 2012

합성보는 철골보와 콘크리트슬래브를 스터드볼트로 일체화한 구조이며, 일반적으로 용접을 이용한 스터드볼트(Stud Bolts)가 연결재로 많이 사용된다. 그러나, 스터드볼트는 감전사고와 같은 전기재해나 용접불량 등 문제점을 가지고 있다. 따라서, 드라이빙핀을 이용한 기계적 접합이 대안으로 대두되고 있다. 본 연구는 드라이빙핀 전용 제안형 전단연결재를 이용한 합성보의 횡하중(지진하중이나 풍하중)시 구조적 성능을 평가하고자 한다. 기존형 합성보과 제안형 합성보는 안정된 탄소성 거동을 나타내었으며 기둥주변에서 콘크리트 압괴로 내력이 저하되었다. 따라서, 제안형 합성보는 기존형 합성보를 대체할 수 있을 것으로 판단된다.

• Journal of the Korean Wood Science and Technology
• /
• 제36권4호
• /
• pp.66-76
• /
• 2008

최근 국내에서 급격히 그 수요가 증가하고 있는 낙엽송과 북미산 SPF(spruce-pine-fir) 규격재의 구조부재로서의 이용에 있어서 가장 간단하면서 많이 이용되는 파스너(fastener)인 못을 이용한 접합에 대해 그 전단성능을 검토하였다. 못접합은 특히 경골목구조(light frame construction)에서는 최적의 시공법으로 인식되고 있으며, 북미와 일본을 중심으로 못접합부에 대한 연구는 많이 진행되어 왔다. 현재 국내의 경골목구조와 기둥-보 공법에서 많이 이용되고 있는 구조부재(축재와 면재)의 못을 이용한 못접합부에 대해 그 전단성능의 기초적인 검토를 행하였다. 못접합부는 면재를 개입한 상태에서 주부재와 측면부재의 방향성에 따라 구분하여 주부재의 방향, 측면부재의 방향, 못의 종류에 따라 전단시험을 행하여 각각의 방향에 따른 못접합부의 전단성능을 비교 검토하였다. SPF 스터드재에 있어서는 낙엽송 집성재나 낙엽송 소재에 비해 못의 종류, 주부재와 면재의 방향성에 따른 전단성능의 차이가 현저하게 나타났다. 또한, 항복내력 및 최대내력과 접합계수와의 관계는 부재간의 배치상태에 따라 다르게 나타났다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2004년도 춘계 학술발표회 제16권1호
• /
• pp.778-781
• /
• 2004

This paper summarizes the results of push-out test specimens with a new type of shear connector called ㄱ type perfobond rib. This connector is a flat steel plate with a number of holes punched through and strengthen rib's head part. According to experiment result, ㄱ type perfobond rib shear connector appeared that resistance force is increased than stud shear connector by $108\%$ and perfobond rib shear connector by $26\%$. The results obtained indicate that the perfobond rib connector is a viable alternative to the headed studs. An appreciable improvement in the shear capacity of the connection was observed when additional reinforcing bars were passed through the perfobond rib holes. For composite beams with concrete filled steel tubes, ㄱ type perfobond shear connectors exhibit adequate ductility and substantially higher capacities.

• 한국화재소방학회:학술대회논문집
• /
• 한국화재소방학회 2008년도 춘계학술논문발표회 논문집
• /
• pp.48-51
• /
• 2008

Shear connector is the element which resist in the horizontal shear force between steel and concrete of composite members and the stud bolt is often used because of its constructional convenience and serviceability. Although the push-out test is the most common method to evaluate shear slip behaviour, it is suitable for only room temperature conditions. In this study, we investigated about shear force, temperature distribution and slip displacement of shear connector in high temperature through the modified push-out test with electronic furnace invented for steel part heating.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2004년도 추계 학술발표회 제16권2호
• /
• pp.113-116
• /
• 2004

No specific guidelines are for computing the shear strength of steel coupling beam connections embedded in the reinforced concrete shear wall. In this paper, a theoretical study of the strength of hybrid coupled shear wall connections is achieved. The bearing stress at failure in the concrete below the steel coupling beam section is related to the concrete compressive strength and the ratio of the width of the steel coupling beam section to the thickness of the hybrid coupled shear wall. To revise factor affecting shear transfer strength across connections between coupled shear walls and steel coupling beam, experimental studies are achieved. The main test variables were auxiliary details of stud bolts. In this studies, these proposed equations are shown to be in good agreement with the test results reported in the paper and with other test data in the literature.

• 토지주택연구
• /
• 제8권3호
• /
• pp.211-221
• /
• 2017

This study proposed hybrid coupled shear wall in the steel plate insertion method, which is capable of reinforcing the shear strength of the entire wall without increasing wall thickness in the wall-slab apartment buildings. The proposed hybrid coupled shear wall was tested for its effectiveness, shear strength and seismic behavior in experiment. As a test result, the shear strength improvement by the proposed hybrid coupled shear was found effective. Integral-type of steel plate insertion was found more effective than separate-type steel plate insertion. In this case, if the stud enforcement method proposed in this study was used, the shear strength of hybrid coupled shear wall was recommended to calculate using the KBC2016 0709.4.1(3) method. The steel plate inserted in the proposed method was found to have no significant impact on the final fracture behavior and bending strength of hybrid coupled shear wall. The shear strength at the final destruction of the wall was merely about 1/50 of the entire design shear strength. Thus, it is deemed that the wall was over excessively designed regarding the shear force in the existing design method. This finding indicates further study on wall designing to ensure effective and economic designing based on appropriate strength estimation under the destruction mechanism.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2011년도 춘계 학술논문 발표대회 2부
• /
• pp.53-56
• /
• 2011

This study is concerned with the SL shear reinforcement that it can be installed easily in filed as product at the factory and seismic performance can be achieved. The method of study is as follows. first, we researched constructability and economy of existing method. Secondly, we made specimen and were examined structural performance tests in order to verify the performance of the shear reinforcement. Shear strength of HILL01-HILL03 specimen applied to SL shear reinforcement increased about 5-14% when compared with the applied shear stirrup reinforcing existing specimens. Also, the amount of the maximum deflection of the central sub-section of HILL01-HILL03 specimen applied to SL shear reinforcement decreased about 41-42% when compared with the applied shear stirrup reinforcing existing specimens. As a result, developed SL shear reinforcement increased in shear strength and stiffness of reinforcement, structural safety is judged to be increased.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2009년도 춘계 학술대회 제21권1호
• /
• pp.109-110
• /
• 2009

본 연구는 리모델링을 통한 슬래브 확장 시, 기존슬래브와 신설슬래브의 접합부에 작용하는 전단성능을 알아보았다. 실험체의 변수는 강관콧타, 전단철근, H형강, 스터드볼트, 원형전단키로 설정하였으며, 이에 따른 실험체를 제작하고 실험을 수행할 예정이다. 실험의 결과, 충분한 전단강도를 보인다면 이를 접합부설계의 기초자료로 활용하도록 한다.