• 제목/요약/키워드: shear force value

검색결과 424건 처리시간 0.029초

고층 건물의 아웃리거 벽체에 의한 외부 기둥의 전단력 해석 (Analysis of Shear Force in Perimeter Column due to Outrigger Wall in a Tall Building)

  • 황일도;김한수
    • 한국전산구조공학회논문집
    • /
    • 제31권6호
    • /
    • pp.293-299
    • /
    • 2018
  • 초고층 건물의 횡변위 제어를 위하여 사용되는 아웃리거를 기존의 철골 트러스 대신에 철근콘크리트 벽체로 대체할 수 있다. 철근콘크리트 아웃리거 벽체를 외부 기둥에 연결할 경우에는 축력뿐만 아니라 전단력과 모멘트가 외부 기둥에 유발될 수 있다. 본 연구에서는 아웃리거 벽체 외단부의 회전으로 인한 외부 기둥의 전단력을 수식으로 유도하고 그 값을 유한요소 해석 결과와 비교하였다. 유한요소해석에서는 층별 연결보의 효과와 전단벽과 아웃리거를 보와 평면응력요소로 모델링한 효과를 분석하였다. 층별 연결보의 효과는 거의 없었으며 평면응력요소는 보요소보다 더 큰 강성을 가진 것으로 해석되었다. 아웃리거 벽체의 외단부 회전으로 인한 외부기둥의 층간 회전각과 전단력은 허용값에 비하여 상당히 작은 값이 발생하였다. 따라서 초고층 건물에 철근콘크리트로 된 아웃리거 벽체를 적용할 경우에도 외부 기둥에 유발되는 전단력과 모멘트에 대하여 별도의 검토를 할 필요는 없을 것으로 판단된다.

Behaviour of a plane joint under horizontal cyclic shear loading

  • Dang, Wengang;Fruhwirt, Thomas;Konietzky, Heinz
    • Geomechanics and Engineering
    • /
    • 제13권5호
    • /
    • pp.809-823
    • /
    • 2017
  • This paper describes lab test results of artificial rock-like material samples having a plane joint. Cyclic shear tests were performed under different normal loads and different shear displacement amplitudes. For this purpose, multi-stage normal loading tests (30 kN, 60 kN, 90 kN, 180 kN, 360 kN and 480 kN) with cyclic excitation at frequency of 1.0 Hz and different shear displacement amplitudes (0.5 mm, 1.0 mm, 2.0 mm, 4.0 mm, 5.0 mm, and 8.0 mm) were conducted using the big shear box device GS-1000. Experimental results show, that shear forces increase with the increase of normal forces and quasi-static friction coefficient is larger than dynamic one. With the increase of normal loads, approaching the peak value of shear forces needs larger shear displacements. During each cycle the normal displacements increase and decrease (rotational behavior in every cycle). Peak angle of inclination increases with the increase of normal load. A phase shift between maximum shear displacement and maximum shear force is observed. The corresponding time shift decreases with increasing normal load and increases with increasing shear displacement amplitudes.

염분농도와 저장 온도에 따른 청미래덩굴 잎의 물리성 변화 (Changes in Leaf Physical Properties of Smilax china L. According to Salt Concentration for Salting and Storage Temperature)

  • 박근혜;전승호;김경문;정종일;김석현;심상인
    • 농업생명과학연구
    • /
    • 제45권4호
    • /
    • pp.13-21
    • /
    • 2011
  • 망개떡의 주원료인 청미래덩굴 잎은 소금물에 저장한 후, 이용 시 세척하여 사용한다. 이에 염장 시 저장 과정에서의 잎의 특성변화를 확인하였다. 천일염과 정제염으로 염장 후 저장한 잎의 수분함량 변화에서는 차이를 보이지 않았으며, 소금의 농도가 높을수록 수분함량은 크게 감소하였다. 실온에서는 정제염에 저장한 잎의 전단력이 높았으나, 저온($4^{\circ}C$)에서는 천일염에서 저장한 잎의 전단력이 높았고, 소금의 농도는 높을수록 저장기간은 짧을수록 전단력이 높아지는 경향을 보였다. 실온보다 저온에서 저장과 소금의 농도가 10% 이하에서 저장한 잎의 색도 변화가 적은 것으로 나타났다.

인삼분말이 함유된 프레스햄 품질특성 (Quality Characteristics of Press Ham Containing Ginseng Powder)

  • 이정일
    • Journal of Animal Science and Technology
    • /
    • 제48권3호
    • /
    • pp.425-434
    • /
    • 2006
  • 일반적인 프레스햄을 대조구로 설정하고, 인삼분말 첨가수준을 달리하여 4 처리구로 설정하였으며, 등심 원료육 중량에 대하여 처리구별로 0.5%(처리구 1), 1%(처리구 2), 1.5%(처리구 3), 2%(처리구 4)를 첨가하여 프레스햄을 제조한 후 진공포장하여 냉장온도(4℃)에서 1, 7, 14, 21 및 28일간 저장하면서 전단가, 관능적 특성분석, 지방산화 및 지방산 조성변화 등을 조사하여 품질 특성을 규명하고자 실시하였다. 전단가는 대조구와 인삼분말 첨가구간에 유의적인 차이가 없었으며, 모든 처리구가 저장기간이 경과함에 따라 감소하였다. 관능적 특성 중 육색은 인삼분말 첨가구에 비하여 대조구가 유의적으로 높았으며, 인삼 향은 인삼분말 첨가수준이 증가할수록 유의적으로 증가하였으며, 전체적인 기호성은 대조구에 비하여 인삼분말 첨가구가 다소 높은 경향이었다. 모든 항목에서 저장기간이 경과하여도 뚜렷한 경향은 없었다. 지방산화는 인삼분말 첨가구가 대조구에 비하여 유의적으로 낮았으며(P<0.05), 지방산화는 모든 처리구가 저장기간이 경과함에 따라 유의적으로 증가하였다(P<0.05). 지방산 조성은 대조구와 인삼분말 첨가구간에 유의적인 차이가 없었으며, 저장기간의 경과에 따른 변화는 없었다.이상의 결과 프레스햄 제조시 인삼분말 첨가가 전단가, 관능적 평가 및 지방산 조성에 영향을 미치지 않으며, 제품의 저장기간을 연장 및 사포닌 성분이 축적된 고급 육제품 생산이 가능하다고 사료된다.

One-dimensional modeling of flat sheet casting or rectangular Fiber spinning process and the effect of normal stresses

  • Kwon, Youngdon
    • Korea-Australia Rheology Journal
    • /
    • 제11권3호
    • /
    • pp.225-232
    • /
    • 1999
  • This study presents 1-dimensional simple model for sheet casting or rectangular fiber spinning process. In order to achieve this goal, we introduce the concept of force flux balance at the die exit, which assigns for the extensional flow outside the die the initial condition containing the information of shear flow history inside the die. With the Leonov constitutive equation that predicts non-vanishing second normal stress difference in shear flow, we are able to describe the anisotropic swelling behavior of the extrudate at least qualitatively. In other words, the negative value of the second normal stress difference causes thickness swelling much higher than width of extrudate. This result implies the importance of choosing the rheological model in the analysis of polymer processing operations, since the constitutive equation with the vanishing second normal stress difference is shown to exhibit the characteristic of isotropic swelling, that is, the thickness swell ratio always equal to the ratio in width direction.

  • PDF

Effect of Lecithin on Dermal Safety of Nanoemulsion Prepared from Hydrogenated Lecithin and Silicone Oil

  • Bae, Duck-Hwan;Shin, Jae-Sup;Shin, Gwi-Su;Jin, Fan-Long;Park, Soo-Jin
    • Bulletin of the Korean Chemical Society
    • /
    • 제30권4호
    • /
    • pp.821-824
    • /
    • 2009
  • In this study, a hydrogenated lecithin-containing nanoemulsion was prepared from hydrogenated lecithin and silicone oil. Tween-60 and liquid paraffin, widely known emulsifiers, were used as standard substances, and high shear was produced by utilizing a high shear homogenizer and microfluidizer. The properties of the nanoemulsion prepared with hydrogenated lecithin were evaluated by measuring interfacial tension, dynamic interfacial tension, droplet size, zeta-potential, friction force, skin surface hygrometery, and dermal safety. The interfacial tension of lecinol S10/silicone oil was lower than that of lecinol S10/liquid paraffin. The nanoemulsion prepared from hydrogenated lecithin shows lower zeta-potential, skin surface hygrometery, and friction force compared with a general emulsion. The silicone nanoemulsion prepared from hydrogenated lecithin showed a zero value in the patch test and thus exhibits high dermal safety.

Effects of Pre-cooking Methods on Quality Characteristics of Reheated Marinated Pork Loin

  • Kim, Tae-Kyung;Hwang, Ko-Eun;Kim, Young-Boong;Jeon, Ki-Hong;Leem, Kyoung-Hoan;Choi, Yun-Sang
    • 한국축산식품학회지
    • /
    • 제38권5호
    • /
    • pp.970-980
    • /
    • 2018
  • We evaluated the effects of pre-cooking methods on the quality of reheated marinated pork loin. Frozen marinated pork loins cooked using various methods (boiling, grilling, pan frying, infrared cooking, and superheated steam cooking) were reheated in a microwave, and their pH, color, cooking loss, re-heating loss, total loss, thiobarbituric acid reactive substance (TBARS) value, sensory properties, and shear force were determined. Although all parameters varied with different cooking methods, lightness values and TBARS values showed the tendency to decrease and increase, respectively, after reheating. Superheated steam-cooked samples showed the lowest values of cooking loss, total loss, TBARS value, and shear force (p<0.05) and the highest lightness, redness, and yellowssness values and juiciness, chewiness, and overall acceptability scores (p<0.05). These results show that pre-cooking with superheated steam maintains the quality characteristics of marinated pork loin upon reheating. Therefore, pre-cooking with superheated steam may be beneficial for the commercial distribution of frozen cooked marinated pork loin.

Comparison of Meat Quality Characteristics of Wet- and Dry-aging Pork Belly and Shoulder Blade

  • Hwang, Young-Hwa;Sabikun, Nahar;Ismail, Ishamri;Joo, Seon-Tea
    • 한국축산식품학회지
    • /
    • 제38권5호
    • /
    • pp.950-958
    • /
    • 2018
  • The physicochemical characteristics and oxidative stability of wet-aged and dry-aged pork cuts were investigated at different aging periods (1, 7, 14 and 21 d). Samples were assigned into four groups in terms of shoulder blade-wet aging (SW), shoulder blade-dry aging (SD), belly-wet aging (BW), and belly-dry aging (BD). SD showed significantly higher pH at 21 d of aging than the other samples. Wet-aged cuts had significantly higher released water (RW) %, lightness ($L^*$) and shear force compared to the dry-aged meats. Sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE) analysis showed greater degradation of proteins for dry-aged cuts than the wet-aged cuts. At the end of aging, wet-aged cuts showed significantly lower thiobarbituric acid-reactive substances (TBARS) value than the dry-aged samples, indicating higher oxidative stability for wet-aged pork cuts. However, dry-aging led to higher degradation of proteins resulting in increased water-holding capacity (WHC) and decreased shear force value.

동결온도가 진공포장 동결육의 품질에 미치는 영향 (Effects of Freezing Temperature on Quality of Vacuum Packaging Freezed Beef)

  • 정인철;김도완;문귀임;강세주;김기영;문윤희
    • 한국식품영양학회지
    • /
    • 제11권4호
    • /
    • pp.409-415
    • /
    • 1998
  • This study was carried out to investigate the effects of freezing temperature on quality of vacuum packaging freezed beef. In case of thaw drip loss, the freezing of -3$^{\circ}C$ and -20$^{\circ}C$ were 5.23% and 5.17% to 60 days respectively, were increased significantly during freezing. The cooking loss of water bath and pan were increased significantly during freezing than the beginning of freezing, but were no different between -3$^{\circ}C$ and -20$^{\circ}C$. The salt soluble protein extractability was decreased during freezing, the -20$^{\circ}C$ freezing was higher than -3$^{\circ}C$freezing. The water soluble protein extractability was increased during freezing higher than during freezing. The myoglobin denatured percentage of the -3$^{\circ}C$ freezing was higher than -20$^{\circ}C$ freezing, the 15 days storage of -3$^{\circ}C$ freezing was highest to 96%. The shear force value was not change during freezing, the myofibrillar fragmentation index during freezing was higher than the beginning of freezing, but was not change during freezing. The pH was decreased to freezing 45 days, after that increased.

  • PDF

Effects of Time-Dependent High Pressure Treatment on Physico-chemical Properties of Pork

  • Hong, Geun-Pyo;Park, Sung-Hee;Kim, Jee-Yeon;Lee, Si-Kyung;Min, Sang-Gi
    • Food Science and Biotechnology
    • /
    • 제14권6호
    • /
    • pp.808-812
    • /
    • 2005
  • The effects of high pressure processing, pressure level (50, 100, 150, and 200 MPa) and pressurized time (0, 5, 10, 15, 30, 45, and 60 min) on the physico-chemical properties of pork M. longissimus dorsi were evaluated. The pH value was affected by both pressure level and pressurized time, especially at 200 MPa (P<0.05). In color measurement, $L^*$ and $a^*$-values were increased by both pressure level and pressurized time, but $b^*$-value did not differ significantly (P>0.05). Water holding capacity (WHC) was significantly decreased (P<0.05) depending on pressure level and pressurized time, while cooking loss was gradually increased. Warner-Bratzler shear force did not differ significantly (P>0.05) among the treatments. These results indicate that high pressure processing below 200 MPa for 1 hr had no effect on the quality of cooked meat, although some alterations were observed before cooking.