• 한국산업융합학회 논문집
• /
• 제10권3호
• /
• pp.165-169
• /
• 2007

Prediction of fatigue duration is attainable from the analysis of the growth rate of the fatigue crack, and the property of the fatigue crack growth is determined by the calculation of the stress intensity factor. And the evaluation of the stress intensity factor, K comes from the stress analysis of the vicinity of crack tip of the continuum. This study describes a simple method to decide the stress intensity factor for the small crack at the sharp edge notches. The proposed method is based on the similarities between elastic stress fields of the notch tip described by two parameters, the stress concentration factor K, the radius of arc of the notch. And it is applicable to the analysis of the semi-elliptical penetration cracks and the edge notches.

• 방송공학회논문지
• /
• 제7권3호
• /
• pp.229-237
• /
• 2002

본 논문에서는 혼합현실의 핵심 기술인 실사와 가상 영상의 합성을 위해 스테레오 영상의 특성을 고려하여 효율적으로 미세 변이를 추정하는 알고리듬과, 추정된 깊이 정보를 이용해 영상을 자연스럽게 합성하는 알고리듬을 제안하며, 이를 모의실험을 통해 검증한다. 제안 방법은 낮은 해상도의 영상으로부터 고해상도로 변이를 찾아가는 계층적 변이 추정 방식으로, 영역분할 양방향 화소정합을 통해 변이 추정의 수행 속도를 향상시키는 동시에 신뢰도를 높이며, 에지 정보를 참조하여 화소 단위로 미세 변이를 할당하게 된다. 이렇게 추정된 깊이 정보는 모델링된 가상 객체의 깊이 정좌와의 비교를 통해 혼합 현실 스테레오 영상으로 합성된다. 제안된 방식을 통해 매우 안정적이면서도 경계 부분이 정확한 변이 정보를 얻을 수 있었고, 3차원 영상의 합성에 효율적으로 사용될 수 있음을 실험을 통해 확인하였다.

• 마이크로전자및패키징학회지
• /
• 제12권1호
• /
• pp.73-76
• /
• 2005

To widen the band gap of ZnO, we have investigated $Zn_{1-x}Mg_xO(ZMO)$ thin films prepared by pulsed laser deposition on c-plane sapphire substrates at $500^{\circ}C$. From X-ray diffraction patterns, ZMO films show only the (0002) and (0004) diffraction peaks. It means that the flints have the wurtzite structure. Segregation of ZnO and MgO phases is found in the films with x=0.59. All the samples are highly transparent in the visible region and have a sharp absorption edge in the UV region. The shift of absorption edge to higher energy is observed in the films with higher Mg composition. The excitonic nature of the films is clearly appeared in the spectra for all alloy compositions. The optical band-gap ($E_g$) of ZMO films is obtained from the ${\alpha}^2$ vs Photon energy plot assuming ${\alpha}^2\;\propto$ (hv - $E_g$), where u is the absorption coefficient and hv is the photon energy. The value of $E_g$ increases up to 3.72 eV for the films with x=0.35. It is important to adjust Mg composition control for controlling the band-gap of ZMO films.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 춘계학술대회
• /
• pp.2151-2156
• /
• 2003

The distinguishing features of flows at high angles of attacks are caused by the generation of free shear layers at sharp leading edges, by separation of the viscous layers from the surfaces of wings and bodies and by the flow in the wakes of the wings and bodies. In this study, systematic approach by PIV experimental method within a circulating water channel was adopted to study the fundamental characteristics of induced vortex generation, development and its breakdown appearing on a delta wing model with or without LEX in terms of four angles of attack($15^{\circ}$, $20^{\circ}$, $25^{\circ}$, $30^{\circ}$) and six measuring sections(30%, 40%, 50%, 60%, 70%, 80%) of chord length. Distributions of time-averaged velocity vectors and vorticities over the delta wing model were compared along the chord length direction. Highly swept leading edge extension(LEX) applied to delta wings has greatly improved the subsonic maneuverability of contemporary fighters. High-speed CCD camera which made it possible to acquire serial images is able to get the detailed information about the flow characteristics occurred on the delta wing. Especially quantitative comparison of the maximum vorticity featuring the induced pressure distribution were also conducted to clarity the significance of the LEX existence.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2002년도 학술대회지
• /
• pp.795-798
• /
• 2002

This paper dispicts the vortical flow characteristics over a delta wing using a computational analysis for the purpose of investigating and visualizing the effect of the angle of attack and fee stream velocity on the low-speed delta wing aerodynamics. Computations are applied to the full, 3-dimensional, compressible, Navier-Stokes Equations. In computations, the free stream velocity is changed between 20m/s and 60m/s and the angle of attack of the delta wing is changed between $16^{\circ}\;and\;28^{\circ}$. For the correct prediction of the major features associated with the delta wing vortex flows, various turbulence models are tested. The standard $k-{\varepsilon}$ turbulence model predict well the vertical flows over the delta wing. Computational results are compared with the previous experimental ones. It is found that the present CFD results predict the vortical flow characteristics over the delta wing, and with an increase in the free steam velocity, the leading edge vortex moves outboard and its streangth is increased.

• 대한원격탐사학회지
• /
• 제27권3호
• /
• pp.359-367
• /
• 2011

A suitable pan-sharpening method has to be chosen with respect to the used spectral characteristic of the multispectral bands and the intended application. The research on pan-sharpening algorithm in improving the accuracy of image classification has been reported. For a classification, preserving the spectral information is important. Other applications such as road detection depend on a sharp and detailed display of the scene. Various criteria applied to scenes with different characteristics should be used to compare the pan-sharpening methods. The pan-sharpening methods in our research comprise rather common techniques like Brovey, IHS(Intensity Hue Saturation) transform, and PCA(Principal Component Analysis), and more complex approaches, including wavelet transformation. The extraction of matching pairs was performed through SIFT descriptor and Canny edge detector. The experiments showed that pan-sharpening techniques for spatial enhancement were effective for extracting point and linear features. As a result of the validation it clearly emphasized that a suitable pan-sharpening method has to be chosen with respect to the used spectral characteristic of the multispectral bands and the intended application. In future it is necessary to design hybrid pan-sharpening for the updating of features and land-use class of a map.

• Restorative Dentistry and Endodontics
• /
• 제15권1호
• /
• pp.20-32
• /
• 1990

The plane strain fracture toughness of a material characterize the resistance to fracture in the presence of a sharp crack under severe tensile condition. Fracture toughness can be determined by indentation method. The purpose of this study was to investigate the fracture toughness of dental amalgams by measuring the plane strain fracture toughness and the fracture toughness from indentation method. Two conventional and four high copper amalgam alloys were employed for this study. The amalgams were prepared according to the A.D.A. spec. No. 1 and inserted into the specially designed mould with the single edge notch specimen to use in 3-point bending method. The specimens (20mm long, 4mm wide, 2mm thick) were stored at $37^{\circ}C$ for 1 week, and tested in 3-point bending by means of Instron at a cross-head speed of 1mm/min. In indentation method, the specimens were made in same manner as single edge notch specimens. The test was conducted with Vickers hardness tester at 10kg load. The following results were obtained. 1. The plane strain fracture toughness and the fracture toughness from indentation method were higher in the low copper amalgams than the high copper amalgams. 2. In high copper amalgams, the fracture toughness of amalgams decreases according as the copper contents increase. 3. In similar copper contents, the single composition amalgams have a higher fracture toughness than the admixed amalgams.

• 대한조선학회논문집
• /
• 제30권3호
• /
• pp.41-50
• /
• 1993

본 논문은 2차원 수중익 주위의 유동해석을 위하여 포텐셜을 기저로한 여러가지 패널법을 비교 한다. 각 패널에서의 특이함수의 세기는 일정하거나 선형으로 변한다고 가정하고, Neumann 및 Dirichlet의 경계조건과 함께 혼합경계조건(Robin경계조건)을 적용하여 정식화를 한후, 각 방법의 정확도를 평가 하였다. 여러가지 2차원 단면에 대한 압력분포 및 양력을 계산하고, 해석해와 비교하였다. 날카로운 뒷날과 큰 캠버값을 갖는 날개의 경우에 특히 예민하다고 알려진 날개 뒷날 부근에서의 국소오차에 대하여 집중적인 연구를 수행하였다. 비교해석 결과, 혼합 경계조건을 사용하는 정식화 방법이 가장 정확성이 높고, 수렴속도도 우수함을 밝혔다.

• 한국산학기술학회논문지
• /
• 제10권12호
• /
• pp.3963-3970
• /
• 2009

본 연구에서는 컴퓨터를 이용하여 미술치료에서 윤곽선의 예리성으로 형태를 평가하고 컬러이미지스케일을 통해 색채를 평가하여 '부드러운-딱딱한'의 정도를 정량적으로 평가하는 방법을 제안한다. 회귀모형을 사용하며 종속 변수는 색채 전문가가 그림을 '부드러운-딱딱한'으로 평가한 순위가 된다. 독립변수는 그림의 명도 및 채도의 평균과 표준편차, 그림의 색채 수, 픽셀의 양, 클러스터의 수, 윤곽선의 길이 및 예리성 등을 고려한다. 단계별 회귀분석에 의하여 종속변수를 설명하는 적절한 독립변수들을 선정한다. 평가자 간의 신뢰성을 살피고 평가자 순위와 시스템 순위 간의 순위상관계수를 통해 시스템의 타당성을 입증한다. 객관적이고 정량적 평가를 가능케 함으로써 색채심리 연구, 미술치료뿐만 아니라 패션, 섬유, 인테리어 산업 등에 유용한 정보를 제공한다.

• Journal of Radiation Protection and Research
• /
• 제43권3호
• /
• pp.107-113
• /
• 2018

Background: The purpose of our study was to compare the dosimetric advantages of Flattening filter free (FFF) beams for trigeminal neuralgia patients using 4 mm conical collimators over previously treated patients with 6 MV SRS beam. Materials and Methods: A retrospective study was conducted for 5 TN patients who had been previously treated at our institution using frame-based, LINAC-based stereotactic radiosurgery (SRS) on Novalis Tx using 6 MV SRS beam were replanned on 6X FFF beams on Edge Linear accelerator with same beam angles and dose constraints using 4 mm conical collimator. The total number of monitor units along with the beam on time was compared for both Edge and Novalis Tx by redelivering the plans in QA mode of LINAC to compare the delivery efficiency. Plan quality was evaluated by homogeneity index (HI) and Paddick gradient index (GI) for each plan. We also analyzed the doses to brainstem and organ at risks (OARs). Results and Discussion: A 28% beam-on time reduction was achieved using 6X FFF when compared with 6X SRS beam of Novalis Tx. A sharp dose fall off with gradient index value of $3.4{\pm}0.27$ for 4 mm Varian conical collimator while $4.17{\pm}0.20$ with BrainLab cone. Among the 5 patients treated with a 4 mm cone, average maximum brainstem dose was 10.24 Gy for Edge using 6X FFF and 14.28 Gy for Novalis Tx using 6X SRS beam. Conclusion: The use of FFF beams improves delivery efficiency and conical collimator reduces dose to OAR's for TN radiosurgery. Further investigation is warranted with larger sample patient data.